Tutorial

How To Install and Use Composer on Debian 8

Published on February 15, 2017
How To Install and Use Composer on Debian 8
Not using Debian 8?Choose a different version or distribution.
Debian 8

Introduction

Composer is a popular dependency management tool for PHP, created mainly to facilitate installation and updates for project dependencies. It will check which other packages a specific project depends on and install them for you, using the appropriate versions according to the project requirements.

This tutorial will show how to install and get started with Composer on a Debian 8 server.

Prerequisites

For this tutorial, you will need:

Step 1 — Installing the Dependencies

Before we download and install Composer, we need to make sure our server has all necessary dependencies installed.

First, update the package manager cache.

  1. sudo apt-get update

Now, let’s install the dependencies. We’ll need curl in order to download Composer and php5-cli, a PHP package, for installing and running it. Composer uses git, a version control system, to download project dependencies. You can install all three of these packages at once with this command:

  1. sudo apt-get install curl php5-cli git

Now that the essential dependencies are installed, let’s proceed and install Composer itself.

Step 2 — Downloading and Installing Composer

We will follow the instructions as written in Composer’s official documentation with a small modification to install Composer globally under /usr/local/bin. This will allow every user on the server to use Composer.

Download the installer to the /tmp directory.

  1. php -r "copy('https://getcomposer.org/installer', '/tmp/composer-setup.php');"

Visit Composer’s pubkeys and signatures page and copy the SHA-384 string at the top . Then, run the following command by replacing sha_384_string with the string you copied.

  1. php -r "if (hash_file('SHA384', '/tmp/composer-setup.php') === 'sha_384_string') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('/tmp/composer-setup.php'); } echo PHP_EOL;"

This command checks the hash of the file you downloaded with the correct hash from Composer’s website. If it matches, it’ll print Installer verified. If it doesn’t match, it’ll print Installer corrupt, in which case you should double check that you copied the SHA-384 string correctly.

Next, we will install Composer. To install it globally under /usr/local/bin, we’ll use the --install-dir flag; --filename tells the installer the name of Composer’s executable file. Here’s how to do this in one command:

  1. sudo php /tmp/composer-setup.php --install-dir=/usr/local/bin --filename=composer

You’ll see a message like the following:

Output
All settings correct for using Composer Downloading... Composer (version 1.3.2) successfully installed to: /usr/local/bin/composer Use it: php /usr/local/bin/composer

You can verify that Composer is correctly installed by checking its version.

  1. composer --version

You should see the version that was installed. At that time of this writing, the version is:

Composer version
Composer version 1.3.2 2017-01-27 18:23:41

Finally, you can safely remove the installer script as you no longer need it.

  1. rm /tmp/composer-setup.php

Composer is now set up and running, waiting to be used by your project. In the next section, you’ll generate the composer.json file, which includes the PHP libraries that your project depends on.

Step 3 — Generating the composer.json File

In order to use Composer for a project, you’ll need a composer.json file. The composer.json file tells Composer which dependencies it needs to download for your project, and which versions of each package are allowed to be installed. This is important to keep your project consistent and avoid installing unstable versions that could potentially cause backwards compatibility issues.

You don’t need to create this file manually; it’s easy to run into syntax errors if you do. Composer auto-generates the composer.json file when you add a dependency to your project using the require command. Additional dependencies can also be added in the same way, without the need to manually edit this file.

The process of using Composer to install a package as dependency in a project usually involves the following steps:

  • Identify what kind of library the application needs
  • Research a suitable open source library on Packagist.org, the official repository for Composer
  • Choose the package you want to depend on
  • Run composer require to include the dependency in the composer.json file and install the package

We’ll see how this works in practice with a simple demo application.

The goal of this application is to transform a given sentence into a slug, which is a URL-friendly string. This is used to convert page titles to URL paths (like the final portion of the URL for this tutorial).

Let’s start by creating a directory for the project. We’ll call it slugify:

  1. cd ~
  2. mkdir slugify
  3. cd slugify

Next, let’s search for the library that we need to use.

Searching for Packages on Packagist

Next, we’ll search Packagist for a package to help generate slugs. If you search for “slug”, you’ll see a list of packages. On the right side of each package in the list, you’ll see two numbers: the number on top is how many times the package was installed and the number on the bottom shows how many times a package was starred on GitHub.

Generally speaking, packages with more installations and stars tend to be more stable because many people are using them. It’s also important to check the package description to make sure the package is really what you’re looking for.

What we need is a simple string-to-slug converter. As an example here, we’ll use the package cocur/slugify. It seems to be a good match because it has a reasonable amount of installations and stars.

You will notice that the packages on Packagist have a vendor name and a package name. Each package has a unique identifier (a namespace) in the same format GitHub uses for its repositories: vendor/package. The library we want to install uses the namespace cocur/slugify. The namespace is what we need in order to require the package in our project.

Now that we identified the library we want, let’s add it to the composer.json file.

Requiring a Package

We can run composer require to include the library as a dependency and also generate the composer.json file for the project:

  1. composer require cocur/slugify
Output
Using version ^2.3 for cocur/slugify ./composer.json has been created Loading composer repositories with package information Updating dependencies (including require-dev) Package operations: 1 install, 0 updates, 0 removals - Installing cocur/slugify (v2.3) Downloading: 100% Writing lock file Generating autoload files

As you can see from the output, Composer automatically decided which version of the package should be used. If you check your project’s directory now, it will contain two new files: composer.json and composer.lock, and a vendor/ directory:

  1. ls -l
Output
total 12 -rw-r--r-- 1 sammy sammy 59 Feb 1 13:43 composer.json -rw-r--r-- 1 sammy sammy 2896 Feb 1 13:43 composer.lock drwxr-xr-x 4 sammy sammy 4096 Feb 1 13:43 vendor

The composer.lock file is used to store information about which versions of each package are installed, and make sure the same versions are used if someone else clones your project and installs its dependencies. The vendor/ directory is where the project dependencies are located. The vendor/ folder should not be committed into version control; you only need to include the composer.json and composer.lock files.

Note: When installing a project that already contains a composer.json file, you need to run composer install in order to download the project’s dependencies.

You may notice that the composer.lock file includes specific information about the version of the PHP libraries our project depends on. Composer uses a special syntax to restrict libraries to specific versions. Let’s see how that works.

Understanding Version Constraints

If you check the contents of your composer.json file, you’ll see something like this:

  1. cat composer.json
Output
{
    "require": {
        "cocur/slugify": "^2.3"
    }
}

There is a caret, ^, before the version number. Composer supports several different constraints and formats for defining the required package version, in order to provide flexibility while also keeping your project stable. The caret operator used by the auto-generated composer.json file is the recommended operator for maximum interoperability, following semantic versioning. In this case, it defines 1.3 as the minimum compatible version, and allows updates to any future version below 2.0. You can read more information about the versions rationale in Composer’s versioning documentation.

So far, we’ve seen how to add and restrict the PHP libraries our project needs with Composer using the composer.json file. The next step is to actually use these libraries inside our application. For that purpose, Composer provides the autoload.php file that facilitates the process of loading external libraries.

Step 4 — Including the Autoload Script

Composer provides an autoload script that you can include in your project to get autoloading for free. This makes it much easier to work with your dependencies and define your own namespaces. The only thing you need to do is include the vendor/autoload.php file in your PHP scripts before any class instantiation.

Let’s come back to the slugify example application. Using nano or your favorite text editor, create a test.php script where we’ll use the cocur/slugify library.

  1. nano test.php
test.php
<?php
require __DIR__ . '/vendor/autoload.php';

use Cocur\Slugify\Slugify;

$slugify = new Slugify();

echo $slugify->slugify('Hello World, this is a long sentence and I need to make a slug from it!');

You can run the script in the command line with:

  1. php test.php

This should produce the output:

Output
hello-world-this-is-a-long-sentence-and-i-need-to-make-a-slug-from-it

You’ve fully set up Composer, but read on to learn how to maintain the installation.

Step 5 — Updating Composer and Project Dependencies (Optional)

To update Composer itself, you can use the built-in command self-update it provides. Because Composer is installed globally, you need to run the command with root privileges.

  1. sudo -H composer self-update

You can update one or more specific libraries by listing them specifically with composer update.

  1. composer update namespace/package

If you want to update all of your project dependencies, run the update command.

  1. composer update

This will check for newer versions of the libraries you required in your project. If a newer version is found and it’s compatible with the version constraint defined in the composer.json file, it will replace the previous version installed. The composer.lock file will be updated to reflect these changes.

Conclusion

Composer is a powerful tool every PHP developer should have in their utility belt. Beyond providing an easy and reliable way for managing project dependencies, it also establishes a new de facto standard for sharing and discovering PHP packages created by the community.

In this tutorial we briefly described the basics of Composer: how to install it, how to create a project and find packages for it, and how to maintain it. To learn more, you can explore the official Composer documentation.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors

Default avatar

staff technical writer

hi! i write do.co/docs now, but i used to be the senior tech editor publishing tutorials here in the community.


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
1 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Thanks Achilleas and Hazel for writing this down. I am a die-hard Debian forever user. And this is the first time I went through an understandable tutorial for composer. There are plenty of step-by-step instruction which dumb you down to step1, step2… step-n. You never understand what is going on. And because of that you don’t know whether it fits the Debian policy. (Debian is great, but doing things the “Debian way” is really better for keeping you system stable). So now finally I am not left out anymore in using Composer.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel