Tutorial

How To Set Up Django with Postgres, Nginx, and Gunicorn on Ubuntu 16.04

How To Set Up Django with Postgres, Nginx, and Gunicorn on Ubuntu 16.04
Not using Ubuntu 16.04?Choose a different version or distribution.
Ubuntu 16.04

Introduction

Django is a powerful web framework that can help you get your Python application or website off the ground. Django includes a simplified development server for testing your code locally, but for anything even slightly production related, a more secure and powerful web server is required.

In this guide, we will demonstrate how to install and configure some components on Ubuntu 16.04 to support and serve Django applications. We will be setting up a PostgreSQL database instead of using the default SQLite database. We will configure the Gunicorn application server to interface with our applications. We will then set up Nginx to reverse proxy to Gunicorn, giving us access to its security and performance features to serve our apps.

Prerequisites and Goals

In order to complete this guide, you should have a fresh Ubuntu 16.04 server instance with a non-root user with sudo privileges configured. You can learn how to set this up by running through our initial server setup guide.

We will be installing Django within a virtual environment. Installing Django into an environment specific to your project will allow your projects and their requirements to be handled separately.

Once we have our database and application up and running, we will install and configure the Gunicorn application server. This will serve as an interface to our application, translating client requests in HTTP to Python calls that our application can process. We will then set up Nginx in front of Gunicorn to take advantage of its high performance connection handling mechanisms and its easy-to-implement security features.

Let’s get started.

Install the Packages from the Ubuntu Repositories

To begin the process, we’ll download and install all of the items we need from the Ubuntu repositories. We will use the Python package manager pip to install additional components a bit later.

We need to update the local apt package index and then download and install the packages. The packages we install depend on which version of Python your project will use.

If you are using Python 2, type:

  1. sudo apt-get update
  2. sudo apt-get install python-pip python-dev libpq-dev postgresql postgresql-contrib nginx

If you are using Django with Python 3, type:

  1. sudo apt-get update
  2. sudo apt-get install python3-pip python3-dev libpq-dev postgresql postgresql-contrib nginx

This will install pip, the Python development files needed to build Gunicorn later, the Postgres database system and the libraries needed to interact with it, and the Nginx web server.

Create the PostgreSQL Database and User

We’re going to jump right in and create a database and database user for our Django application.

By default, Postgres uses an authentication scheme called “peer authentication” for local connections. Basically, this means that if the user’s operating system username matches a valid Postgres username, that user can login with no further authentication.

During the Postgres installation, an operating system user named postgres was created to correspond to the postgres PostgreSQL administrative user. We need to use this user to perform administrative tasks. We can use sudo and pass in the username with the -u option.

Log into an interactive Postgres session by typing:

  1. sudo -u postgres psql

You will be given a PostgreSQL prompt where we can set up our requirements.

First, create a database for your project:

  1. CREATE DATABASE myproject;

Note

Every Postgres statement must end with a semi-colon, so make sure that your command ends with one if you are experiencing issues.

Next, create a database user for our project. Make sure to select a secure password:

  1. CREATE USER myprojectuser WITH PASSWORD 'password';

Afterwards, we’ll modify a few of the connection parameters for the user we just created. This will speed up database operations so that the correct values do not have to be queried and set each time a connection is established.

We are setting the default encoding to UTF-8, which Django expects. We are also setting the default transaction isolation scheme to “read committed”, which blocks reads from uncommitted transactions. Lastly, we are setting the timezone. By default, our Django projects will be set to use UTC. These are all recommendations from the Django project itself:

  1. ALTER ROLE myprojectuser SET client_encoding TO 'utf8';
  2. ALTER ROLE myprojectuser SET default_transaction_isolation TO 'read committed';
  3. ALTER ROLE myprojectuser SET timezone TO 'UTC';

Now, we can give our new user access to administer our new database:

  1. GRANT ALL PRIVILEGES ON DATABASE myproject TO myprojectuser;

When you are finished, exit out of the PostgreSQL prompt by typing:

  1. \q

Create a Python Virtual Environment for your Project

Now that we have our database, we can begin getting the rest of our project requirements ready. We will be installing our Python requirements within a virtual environment for easier management.

To do this, we first need access to the virtualenv command. We can install this with pip.

If you are using Python 2, upgrade pip and install the package by typing:

  1. sudo -H pip install --upgrade pip
  2. sudo -H pip install virtualenv

If you are using Python 3, upgrade pip and install the package by typing:

  1. sudo -H pip3 install --upgrade pip
  2. sudo -H pip3 install virtualenv

With virtualenv installed, we can start forming our project. Create and move into a directory where we can keep our project files:

  1. mkdir ~/myproject
  2. cd ~/myproject

Within the project directory, create a Python virtual environment by typing:

  1. virtualenv myprojectenv

This will create a directory called myprojectenv within your myproject directory. Inside, it will install a local version of Python and a local version of pip. We can use this to install and configure an isolated Python environment for our project.

Before we install our project’s Python requirements, we need to activate the virtual environment. You can do that by typing:

  1. source myprojectenv/bin/activate

Your prompt should change to indicate that you are now operating within a Python virtual environment. It will look something like this: (myprojectenv)user@host:~/myproject$.

With your virtual environment active, install Django, Gunicorn, and the psycopg2 PostgreSQL adaptor with the local instance of pip:

Note

Regardless of which version of Python you are using, when the virtual environment is activated, you should use the pip command (not pip3).

  1. pip install django gunicorn psycopg2

You should now have all of the software needed to start a Django project.

Create and Configure a New Django Project

With our Python components installed, we can create the actual Django project files.

Create the Django Project

Since we already have a project directory, we will tell Django to install the files here. It will create a second level directory with the actual code, which is normal, and place a management script in this directory. The key to this is that we are defining the directory explicitly instead of allowing Django to make decisions relative to our current directory:

  1. django-admin.py startproject myproject ~/myproject

At this point, your project directory (~/myproject in our case) should have the following content:

  • ~/myproject/manage.py: A Django project management script.
  • ~/myproject/myproject/: The Django project package. This should contain the __init__.py, settings.py, urls.py, and wsgi.py files.
  • ~/myproject/myprojectenv/: The virtual environment directory we created earlier.

Adjust the Project Settings

The first thing we should do with our newly created project files is adjust the settings. Open the settings file in your text editor:

  1. nano ~/myproject/myproject/settings.py

Start by locating the ALLOWED_HOSTS directive. This defines a list of the server’s addresses or domain names may be used to connect to the Django instance. Any incoming requests with a Host header that is not in this list will raise an exception. Django requires that you set this to prevent a certain class of security vulnerability.

In the square brackets, list the IP addresses or domain names that are associated with your Django server. Each item should be listed in quotations with entries separated by a comma. If you wish requests for an entire domain and any subdomains, prepend a period to the beginning of the entry. In the snippet below, there are a few commented out examples used to demonstrate:

~/myproject/myproject/settings.py
. . .
# The simplest case: just add the domain name(s) and IP addresses of your Django server
# ALLOWED_HOSTS = [ 'example.com', '203.0.113.5']
# To respond to 'example.com' and any subdomains, start the domain with a dot
# ALLOWED_HOSTS = ['.example.com', '203.0.113.5']
ALLOWED_HOSTS = ['your_server_domain_or_IP', 'second_domain_or_IP', . . .]

Next, find the section that configures database access. It will start with DATABASES. The configuration in the file is for a SQLite database. We already created a PostgreSQL database for our project, so we need to adjust the settings.

Change the settings with your PostgreSQL database information. We tell Django to use the psycopg2 adaptor we installed with pip. We need to give the database name, the database username, the database user’s password, and then specify that the database is located on the local computer. You can leave the PORT setting as an empty string:

~/myproject/myproject/settings.py
. . .

DATABASES = {
    'default': {
        'ENGINE': 'django.db.backends.postgresql_psycopg2',
        'NAME': 'myproject',
        'USER': 'myprojectuser',
        'PASSWORD': 'password',
        'HOST': 'localhost',
        'PORT': '',
    }
}

. . .

Next, move down to the bottom of the file and add a setting indicating where the static files should be placed. This is necessary so that Nginx can handle requests for these items. The following line tells Django to place them in a directory called static in the base project directory:

~/myproject/myproject/settings.py
. . .

STATIC_URL = '/static/'
STATIC_ROOT = os.path.join(BASE_DIR, 'static/')

Save and close the file when you are finished.

Complete Initial Project Setup

Now, we can migrate the initial database schema to our PostgreSQL database using the management script:

  1. ~/myproject/manage.py makemigrations
  2. ~/myproject/manage.py migrate

Create an administrative user for the project by typing:

  1. ~/myproject/manage.py createsuperuser

You will have to select a username, provide an email address, and choose and confirm a password.

We can collect all of the static content into the directory location we configured by typing:

  1. ~/myproject/manage.py collectstatic

You will have to confirm the operation. The static files will then be placed in a directory called static within your project directory.

If you followed the initial server setup guide, you should have a UFW firewall protecting your server. In order to test the development server, we’ll have to allow access to the port we’ll be using.

Create an exception for port 8000 by typing:

  1. sudo ufw allow 8000

Finally, you can test our your project by starting up the Django development server with this command:

  1. ~/myproject/manage.py runserver 0.0.0.0:8000

In your web browser, visit your server’s domain name or IP address followed by :8000:

http://server_domain_or_IP:8000

You should see the default Django index page:

Django index page

If you append /admin to the end of the URL in the address bar, you will be prompted for the administrative username and password you created with the createsuperuser command:

Django admin login

After authenticating, you can access the default Django admin interface:

Django admin interface

When you are finished exploring, hit CTRL-C in the terminal window to shut down the development server.

Testing Gunicorn’s Ability to Serve the Project

The last thing we want to do before leaving our virtual environment is test Gunicorn to make sure that it can serve the application. We can do this by entering our project directory and using gunicorn to load the project’s WSGI module:

  1. cd ~/myproject
  2. gunicorn --bind 0.0.0.0:8000 myproject.wsgi

This will start Gunicorn on the same interface that the Django development server was running on. You can go back and test the app again.

Note: The admin interface will not have any of the styling applied since Gunicorn does not know about the static CSS content responsible for this.

We passed Gunicorn a module by specifying the relative directory path to Django’s wsgi.py file, which is the entry point to our application, using Python’s module syntax. Inside of this file, a function called application is defined, which is used to communicate with the application. To learn more about the WSGI specification, click here.

When you are finished testing, hit CTRL-C in the terminal window to stop Gunicorn.

We’re now finished configuring our Django application. We can back out of our virtual environment by typing:

  1. deactivate

The virtual environment indicator in your prompt will be removed.

Create a Gunicorn systemd Service File

We have tested that Gunicorn can interact with our Django application, but we should implement a more robust way of starting and stopping the application server. To accomplish this, we’ll make a systemd service file.

Create and open a systemd service file for Gunicorn with sudo privileges in your text editor:

  1. sudo nano /etc/systemd/system/gunicorn.service

Start with the [Unit] section, which is used to specify metadata and dependencies. We’ll put a description of our service here and tell the init system to only start this after the networking target has been reached:

/etc/systemd/system/gunicorn.service
[Unit]
Description=gunicorn daemon
After=network.target

Next, we’ll open up the [Service] section. We’ll specify the user and group that we want to process to run under. We will give our regular user account ownership of the process since it owns all of the relevant files. We’ll give group ownership to the www-data group so that Nginx can communicate easily with Gunicorn.

We’ll then map out the working directory and specify the command to use to start the service. In this case, we’ll have to specify the full path to the Gunicorn executable, which is installed within our virtual environment. We will bind it to a Unix socket within the project directory since Nginx is installed on the same computer. This is safer and faster than using a network port. We can also specify any optional Gunicorn tweaks here. For example, we specified 3 worker processes in this case:

/etc/systemd/system/gunicorn.service
[Unit]
Description=gunicorn daemon
After=network.target

[Service]
User=sammy
Group=www-data
WorkingDirectory=/home/sammy/myproject
ExecStart=/home/sammy/myproject/myprojectenv/bin/gunicorn --access-logfile - --workers 3 --bind unix:/home/sammy/myproject/myproject.sock myproject.wsgi:application

Finally, we’ll add an [Install] section. This will tell systemd what to link this service to if we enable it to start at boot. We want this service to start when the regular multi-user system is up and running:

/etc/systemd/system/gunicorn.service
[Unit]
Description=gunicorn daemon
After=network.target

[Service]
User=sammy
Group=www-data
WorkingDirectory=/home/sammy/myproject
ExecStart=/home/sammy/myproject/myprojectenv/bin/gunicorn --access-logfile - --workers 3 --bind unix:/home/sammy/myproject/myproject.sock myproject.wsgi:application

[Install]
WantedBy=multi-user.target

With that, our systemd service file is complete. Save and close it now.

We can now start the Gunicorn service we created and enable it so that it starts at boot:

  1. sudo systemctl start gunicorn
  2. sudo systemctl enable gunicorn

We can confirm that the operation was successful by checking for the socket file.

Check for the Gunicorn Socket File

Check the status of the process to find out whether it was able to start:

  1. sudo systemctl status gunicorn

Next, check for the existence of the myproject.sock file within your project directory:

  1. ls /home/sammy/myproject
Output
manage.py myproject myprojectenv myproject.sock static

If the systemctl status command indicated that an error occurred or if you do not find the myproject.sock file in the directory, it’s an indication that Gunicorn was not able to start correctly. Check the Gunicorn process logs by typing:

  1. sudo journalctl -u gunicorn

Take a look at the messages in the logs to find out where Gunicorn ran into problems. There are many reasons that you may have run into problems, but often, if Gunicorn was unable to create the socket file, it is for one of these reasons:

  • The project files are owned by the root user instead of a sudo user
  • The WorkingDirectory path within the /etc/systemd/system/gunicorn.service file does not point to the project directory
  • The configuration options given to the gunicorn process in the ExecStart directive are not correct. Check the following items:
    • The path to the gunicorn binary points to the actual location of the binary within the virtual environment
    • The --bind directive defines a file to create within a directory that Gunicorn can access
    • The myproject.wsgi:application is an accurate path to the WSGI callable. This means that when you’re in the WorkingDirectory, you should be able to reach the callable named application by looking in the myproject.wsgi module (which translates to a file called ./myproject/wsgi.py)

If you make changes to the /etc/systemd/system/gunicorn.service file, reload the daemon to reread the service definition and restart the Gunicorn process by typing:

  1. sudo systemctl daemon-reload
  2. sudo systemctl restart gunicorn

Make sure you troubleshoot any of the above issues before continuing.

Configure Nginx to Proxy Pass to Gunicorn

Now that Gunicorn is set up, we need to configure Nginx to pass traffic to the process.

Start by creating and opening a new server block in Nginx’s sites-available directory:

  1. sudo nano /etc/nginx/sites-available/myproject

Inside, open up a new server block. We will start by specifying that this block should listen on the normal port 80 and that it should respond to our server’s domain name or IP address:

/etc/nginx/sites-available/myproject
server {
    listen 80;
    server_name server_domain_or_IP;
}

Next, we will tell Nginx to ignore any problems with finding a favicon. We will also tell it where to find the static assets that we collected in our ~/myproject/static directory. All of these files have a standard URI prefix of “/static”, so we can create a location block to match those requests:

/etc/nginx/sites-available/myproject
server {
    listen 80;
    server_name server_domain_or_IP;

    location = /favicon.ico { access_log off; log_not_found off; }
    location /static/ {
        root /home/sammy/myproject;
    }
}

Finally, we’ll create a location / {} block to match all other requests. Inside of this location, we’ll include the standard proxy_params file included with the Nginx installation and then we will pass the traffic to the socket that our Gunicorn process created:

/etc/nginx/sites-available/myproject
server {
    listen 80;
    server_name server_domain_or_IP;

    location = /favicon.ico { access_log off; log_not_found off; }
    location /static/ {
        root /home/sammy/myproject;
    }

    location / {
        include proxy_params;
        proxy_pass http://unix:/home/sammy/myproject/myproject.sock;
    }
}

Save and close the file when you are finished. Now, we can enable the file by linking it to the sites-enabled directory:

  1. sudo ln -s /etc/nginx/sites-available/myproject /etc/nginx/sites-enabled

Test your Nginx configuration for syntax errors by typing:

  1. sudo nginx -t

If no errors are reported, go ahead and restart Nginx by typing:

  1. sudo systemctl restart nginx

Finally, we need to open up our firewall to normal traffic on port 80. Since we no longer need access to the development server, we can remove the rule to open port 8000 as well:

  1. sudo ufw delete allow 8000
  2. sudo ufw allow 'Nginx Full'

You should now be able to go to your server’s domain or IP address to view your application.

Note

After configuring Nginx, the next step should be securing traffic to the server using SSL/TLS. This is important because without it, all information, including passwords are sent over the network in plain text.

If you have a domain name, the easiest way get an SSL certificate to secure your traffic is using Let’s Encrypt. Follow this guide to set up Let’s Encrypt with Nginx on Ubuntu 16.04.

If you do not have a domain name, you can still secure your site for testing and learning with a self-signed SSL certificate.

Troubleshooting Nginx and Gunicorn

If this last step does not show your application, you will need to troubleshoot your installation.

Nginx Is Showing the Default Page Instead of the Django Application

If Nginx displays the default page instead of proxying to your application, it usually means that you need to adjust the server_name within the /etc/nginx/sites-available/myproject file to point to your server’s IP address or domain name.

Nginx uses the server_name to determine which server block to use to respond to requests. If you are seeing the default Nginx page, it is a sign that Nginx wasn’t able to match the request to a sever block explicitly, so it’s falling back on the default block defined in /etc/nginx/sites-available/default.

The server_name in your project’s server block must be more specific than the one in the default server block to be selected.

Nginx Is Displaying a 502 Bad Gateway Error Instead of the Django Application

A 502 error indicates that Nginx is unable to successfully proxy the request. A wide range of configuration problems express themselves with a 502 error, so more information is required to troubleshoot properly.

The primary place to look for more information is in Nginx’s error logs. Generally, this will tell you what conditions caused problems during the proxying event. Follow the Nginx error logs by typing:

  1. sudo tail -F /var/log/nginx/error.log

Now, make another request in your browser to generate a fresh error (try refreshing the page). You should see a fresh error message written to the log. If you look at the message, it should help you narrow down the problem.

You might see some of the following message:

connect() to unix:/home/sammy/myproject/myproject.sock failed (2: No such file or directory)

This indicates that Nginx was unable to find the myproject.sock file at the given location. You should compare the proxy_pass location defined within /etc/nginx/sites-available/myproject file to the actual location of the myproject.sock file generated in your project directory.

If you cannot find a myproject.sock file within your project directory, it generally means that the gunicorn process was unable to create it. Go back to the section on checking for the Gunicorn socket file to step through the troubleshooting steps for Gunicorn.

connect() to unix:/home/sammy/myproject/myproject.sock failed (13: Permission denied)

This indicates that Nginx was unable to connect to the Gunicorn socket because of permissions problems. Usually, this happens when the procedure is followed using the root user instead of a sudo user. While the Gunicorn process is able to create the socket file, Nginx is unable to access it.

This can happen if there are limited permissions at any point between the root directory (/) the myproject.sock file. We can see the permissions and ownership values of the socket file and each of its parent directories by passing the absolute path to our socket file to the namei command:

  1. namei -nom /home/sammy/myproject/myproject.sock
Output
f: /home/sammy/myproject/myproject.sock drwxr-xr-x root root / drwxr-xr-x root root home drwxr-xr-x sammy sammy sammy drwxrwxr-x sammy sammy myproject srwxrwxrwx sammy www-data myproject.sock

The output displays the permissions of each of the directory components. By looking at the permissions (first column), owner (second column) and group owner (third column), we can figure out what type of access is allowed to the socket file.

In the above example, the socket file and each of the directories leading up to the socket file have world read and execute permissions (the permissions column for the directories end with r-x instead of ---). The Nginx process should be able to access the socket successfully.

If any of the directories leading up to the socket do not have world read and execute permission, Nginx will not be able to access the socket without allowing world read and execute permissions or making sure group ownership is given to a group that Nginx is a part of. For sensitive locations like the /root directory, both of the above options are dangerous. It’s better to move the project files outside of the directory, where you can safely control access without compromising security.

Django Is Displaying: “could not connect to server: Connection refused”

One message that you may see from Django when attempting to access parts of the application in the web browser is:

OperationalError at /admin/login/
could not connect to server: Connection refused
    Is the server running on host "localhost" (127.0.0.1) and accepting
    TCP/IP connections on port 5432?

This indicates that Django is unable to connect to the Postgres database. Make sure that the Postgres instance is running by typing:

  1. sudo systemctl status postgresql

If it is not, you can start it and enable it to start automatically at boot (if it is not already configured to do so) by typing:

  1. sudo systemctl start postgresql
  2. sudo systemctl enable postgresql

If you are still having issues, make sure the database settings defined in the ~/myproject/myproject/settings.py file are correct.

Further Troubleshooting

For additional troubleshooting, the logs can help narrow down root causes. Check each of them in turn and look for messages indicating problem areas.

The following logs may be helpful:

  • Check the Nginx process logs by typing: sudo journalctl -u nginx
  • Check the Nginx access logs by typing: sudo less /var/log/nginx/access.log
  • Check the Nginx error logs by typing: sudo less /var/log/nginx/error.log
  • Check the Gunicorn application logs by typing: sudo journalctl -u gunicorn

As you update your configuration or application, you will likely need to restart the processes to adjust to your changes.

If you update your Django application, you can restart the Gunicorn process to pick up the changes by typing:

  1. sudo systemctl restart gunicorn

If you change gunicorn systemd service file, reload the daemon and restart the process by typing:

  1. sudo systemctl daemon-reload
  2. sudo systemctl restart gunicorn

If you change the Nginx server block configuration, test the configuration and then Nginx by typing:

  1. sudo nginx -t && sudo systemctl restart nginx

These commands are helpful for picking up changes as you adjust your configuration.

Conclusion

In this guide, we’ve set up a Django project in its own virtual environment. We’ve configured Gunicorn to translate client requests so that Django can handle them. Afterwards, we set up Nginx to act as a reverse proxy to handle client connections and serve the correct project depending on the client request.

Django makes creating projects and applications simple by providing many of the common pieces, allowing you to focus on the unique elements. By leveraging the general tool chain described in this article, you can easily serve the applications you create from a single server.

Want to deploy your application quickly? Try Cloudways, the #1 managed hosting provider for small-to-medium businesses, agencies, and developers - for free! DigitalOcean and Cloudways together will give you a reliable, scalable, and hassle-free managed hosting experience with anytime support that makes all your hosting worries a thing of the past. Start with $100 in free credits!

Learn more here


About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Thanks for the tutorial Justin, I managed to get Ngnix working after a few hiccups. If you are a idiot like me and make any mistakes on the the Gunicorn Service file and then enable Gunicorn, you’ll likely get a Nginx default page/Bad Gateway 502 response. To get the Django default page and admin site back, you have to type:

sudo systemctl daemon-reload
sudo systemctl start gunicorn
sudo systemctl enable gunicorn
sudo systemctl restart nginx

Found this super useful. Can you show the steps in this example to use uWSGI instead of Gunicorn?

Here’s how to diagnose a problem with nginx or gunicorn (and fix the 'ImportError: No Module names xxx.wsgi):

  • First, you need to make sure that gunicorn works after creating the ‘service’.
  • When you do ‘sudo systemctl start gunicorn’, it should start gunicorn and create the ‘xxx.sock file’.
  • To know if gunicorn really started, you can type ‘ps -aux | grep gunicorn’, it should show about 4 proccesses. If you just see 1 line ending with ‘0:00 grep --color=auto gunicorn’, it means that there was an error.
  • To see what error happened while trying to start gunicorn, type ‘journalctl -u gunicorn.service’ and scroll at the end. The error can help you.
  • If you see in the error log something like ‘ImportError: No module named your_project.wsgi’, you probably had the same error as me. I fixed that by adding the ‘–pythonpath’ parameter to the ‘ExectStart’ line in the ‘gunicorn.service’ file:. For example:
ExecStart=... --worker 3 --pythonpath '/home/user/project/django_project' --bind ...
  • You want the ‘Python path’ to be the parent directory that has the ‘wsgi.py’ file
  • Then, when gunicorn starts correctly and you see the ‘.sock’ file, you can see any error happening when you restart Nginx in this directory: /var/log/nginx/error.log

Great write up I got it working in one shot, I have 2 questions though.

Q1: Does ‘systemctl’ replace the need for supervisor?

Q2: Does this setup allow for multiple domains/gunicorn.socks to be hosting on the same machine?

Thanks for this Writing. How could I Set up the gunicorn and nginx to server another django project?

Question in: /etc/systemd/system/gunicorn.service

Is myproject.wsgi:application supposed to have the ‘myproject’ part in red to indicate it should reflect the name we chose for our Django app?

This guide worked for me without a problem. Well done and thank you.

Pls help me

502 Bad Gateway nginx/1.10.0 (Ubuntu)

Hello, I have followed your instructions word for word. Although I am getting strange 502 bad gateway errors. I checked the error logs of nginx and it says that under path/to/my/project/dir/project.sock (no file or directory exists). I have looked all over online and was wondering if anyone has a solution.

What do the myproject directories look like? I’m trying to implement this with a project I have already created but it’s difficult to know exactly what directories to use when I don’t know what the tree looks like.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel