There are many reasons why you would want to compress files and directories on a computer. Some of the more straightforward benefits are conserving disk space and using less bandwidth for network communication.
In this guide, we will discuss some of the different methods of compressing data and talk a bit about some of the trade-offs of various methods. We will also touch on some associated operations, like archiving, which make our compression tools much more flexible.
We will be demoing these tools on an Ubuntu 12.04 VPS instance, but they will operate pretty much exactly the same on any modern Linux distribution.
Before we jump in to the actual tools we’ll be using, we should define our terms and discuss some of the different characteristics of compression and archiving techniques.
Compression is a way of reducing the size of a file on disk using different algorithms and mathematical calculations. Files are formatted in certain ways that make their general structure somewhat predictable, even if their content varies. Furthermore, content itself is often repeated. Both of these areas represent opportunities to employ compression techniques.
When discussing compression in regards to computers and file types, the same terms can mean a few different things depending on context. Let’s take for example an MP3 music file. An MP3 is a compressed sound file that is used to create a smaller file from a larger source music file.
This type of compression is fundamentally different than what we will be talking about in this guide. This is because an MP3 is created by analysing the waveform of the audio file and basically figuring out which data it can throw away permanently while still retaining the spirit or general sound of the original.
This is called a lossy compression method because it really does lose the information from the original file that does not make it into the MP3. You can not convert the MP3 back into the same source file later on.
The compression may be unnoticeable to the user, but it does not contain all of the relevant information of the original. The higher the compression ratio, the more the compression will start to affect significant portions of the audio.
Another example of this is JPEG images. The more they are compressed, the more significant data is lost and the more the compression will be visible. A JPEG compression utility will try to find fields of color that are close enough to one another and replace the entire field with a single color. The greater the compression ratio that is used, the larger the range of colors is that will be blanketed in this manner.
Alternatively, a lossless compression method creates a file smaller than the original that can be used to reconstruct the original file. Lossless compression is the type that we will cover in this guide. This type of compression does not use approximations to compress data, and instead uses certain algorithms to recognize repeated portions of a file. It removes these and replaces them with a placeholder. It continues on and replaces later occurrences of the pattern with references to the same placeholder.
This allows the computer to store the information on less disk space. Think of this process as creating a list of variables that define blocks of data, and then using those variables later on to fill in the program. These are actually the two stages that every lossless compression technique uses: map highly repeated values to something which is smaller that can be easily referenced and then change the occurrences of each of those values with the reference.
Furthermore, modern lossless compression techniques are said to be adaptive. This means that they do not analyse the entire input file at the beginning and create the “dictionary” of reference substitutions from that. Instead, they analyze the file as they go and rewrite the dictionary based on what data is actually repeated. The dictionary progressively gets more efficient as the process continues.
The idea of “archiving” data generally means backing it up and saving it to a secure location, often in a compressed format. An “archive” on a Linux server in general has a slightly different meaning. Usually it refers to a
Historically, data from servers was often backed up onto tape archives, which are magnetic tape devices that can be used to store sequential data. This is still the preferred backup method for some industries. In order to do this efficiently, the
tar program was created so that you can address and manipulate many files in a filesystem, with intact permissions and metadata, as one file. You can then extract a file or the entire filesystem from the archive.
tar file is a file format that creates a convenient way to distribute, store, back up, and manipulate groups of related files. We will be talking about archives in this guide too because archives are often compressed during the archival process in order to store data in a more efficient manner.
Linux has a number of different compression tools available. They each make sacrifices in certain areas and each have their specific strengths. We will bias ourselves towards compression schemes that work with
tar because they will be much more flexible than other methods.
gzip tool is typically categorized as the “classic” method of compressing data on a Linux machine. It has been around since 1992, is still in development, and still has many things going for it.
gzip tool uses a compression algorithm know as “DEFLATE”, an algorithm also used in other popular technologies like the PNG image format, the HTTP web protocol, and the SSH secure shell protocol.
One of its main advantages is speed. It can both compress and decompress data at a much higher rate than some competing technologies, especially when comparing each utility’s most compact compression formats. It is also very resource efficient in terms of memory usage during compression and decompression and does not seem to require more memory when optimizing for best compression.
Another consideration is compatibility. Since
gzip is such an old tool, almost all Linux systems, regardless of age, will have the tool available to handle the data.
Its biggest disadvantage is that it compresses data less thoroughly than some other options. If you are doing a lot of quick compressions and decompressions, this might be a good format for you, but if you plan to compress once and store the file, then other options might have advantages.
gzip files are stored with a
.gz extension. You can compress files with
gzip by typing a command like this:
<pre> gzip <span class=“highlight”>sourcefile</span> </pre>
This will compress the file and change the name to
sourcefile.gz on your system.
If you would like to recursively compress an entire directory, you can pass the
-r flag like this:
<pre> gzip -r <span class=“highlight”>directory1</span> </pre>
This will move down through a directory and compress each file individually. This is usually not preferred, and a better result can be achieved by archiving the directory and compressing the resulting file as a whole, which we’ll show how to do shortly.
To find out more information about the compressed file, you can use the
-l flag, which will give you some stats:
gzip -l test.gz
compressed uncompressed ratio uncompressed_name 5133 14073 63.7% test
If you need to pipe the results to another utility, you can tell
gzip to send the compressed file to standard out by using the
-c flag. We will simply pipe it directly into a file again in this example:
gzip -c test > test.gz
You can adjust the compression optimization by passing a numbered flag between 1 and 9. The
-1 flag (and its alias
--fast) represent the fastest, but least thorough compression. The
-9 flag (and its alias
--best) represents the slowest and most thorough compression. The default option is
-6, which is a good middle ground.
gzip -9 compressme
To decompress a file, you simply pass the
-d flag to
gzip (there are also aliases like
gunzip, but they do the same thing):
gzip -d test.gz
Another common compression format and tool is
bzip2. While somewhat more modern than
gzip, being first introduced in 1996,
bzip2 is very heavily implemented as the traditional alternative to
gzip relies on the “DEFLATE” algorithm,
bzip2 is an implementation of an algorithm called the “Burrows-Wheeler algorithm”. This difference in methodology results in a set of strengths and weaknesses that is quite different from
The most important trade off for most users is greater compression at the cost of longer compression time. The
bzip2 tools can create significantly more compact files than
gzip, but take much longer to achieve those results due to a more complex algorithm.
Luckily, the decompression time does not suffer as much as the compression time, so it may be advantageous to distribute files using the
bzip2 format since you will only suffer the time penalty during compression and be able to distribute smaller files that can be decompressed in a reasonable amount of time. The decompression time is still much greater than
gzip, but does not have as big of an impact as the compression operation.
Another thing to keep in mind is that the memory requirements are greater than
gzip. This won’t have an affect on most machines, but on small embedded devices, this may affect your choice. You can optionally pass a
-s flag, which will cut the memory requirements roughly in half, but will also lead to a lower compression ratio.
Files compressed with this mechanism are generally given a
.bz2 file extension.
To create a
bzip2 compressed file, you can simple type something like:
<pre> bzip2 <span class=“highlight”>afile</span> </pre>
This will compress the file and give it the name “afile.bz2”.
As mentioned above, you can pass the
-s flag to denote that the utility should operate in a reduced memory mode. This won’t compress as well, but it will not require as many resources.
bzip2 -s afile
bzip2 implements numbered flags, they mean something somewhat different than they do with
gzip. Here, they represent the block size that the utility manages to implement its compression, so this is more a measurement of memory usage vs compression size, rather than time vs compression size. The default behavior is the
-9 flag, which means high memory usage (relatively) but greater compression.
bzip2 -1 file
To decompress a
bzip compressed file, you can pass the
bzip2 -d file.bz2
This will give back an uncompressed file called “file”.
A relative newcomer in the space is the
xz compression mechanism. This compression tool was first released in 2009, and has gained a steady following ever since.
xz compression utilities leverage a compression algorithm known as LZMA2. This algorithm has a greater compression ratio than the previous two examples, making it a great format when you need to store data on limited disk space. It creates smaller files.
This again comes at a cost, in most of the same areas that
bzip2 suffers. While the compressed files that
xz produces are smaller than the other utilities, it takes significantly longer to do the compression. For instance, with the heavy compression flags on a fairly large file,
gzip may require around half a minute,
bzip2 might be somewhere around a minute, and
xz may take around four or five minutes.
xz compression tools also take a hit in the memory requirements, sometimes up to an order of magnitude over the other methods. If you are on a system with abundant memory, this might not be a problem, but this is a consideration to keep in mind.
While the compression time might be much longer than is preferable, the decompression time is actually relatively good. While it never approaches
gzip in terms of decompression speed, it is usually significantly faster at decompressing than
bzip2. The memory usage for decompressing isn’t quite as astronomical either (but is still rather high comparatively).
This set of advantages and disadvantages make this a great format for distributing files like software. You will have to eat the compression time penalty up front, but the consumers of your file will benefit quite a lot. They will have a compact file which will decompress quickly.
Another hidden disadvantage of this format is that it might not be supported on some older systems due to its age. If you are going for maximum compatibility, you may be forced to look elsewhere.
Files created in this format generally take an extension of
To compress a file, simply call the utility without any arguments:
<pre> xz file </pre>
This will process the file and produce a file called “file.xz”.
To list statistics about the compression of the file, you can pass the
-l flag on a compressed file:
xz -l test.xz
Strms Blocks Compressed Uncompressed Ratio Check Filename 1 1 5,016 B 13.7 KiB 0.356 CRC64 test.xz
If you need to send the compressed output to standard out, you can signal that to the utility with the
-c flag. Here we can again direct it straight back into a file:
xz -c test > test.xz
For the numbered flags,
xz uses the lower numbers to indicate faster compression. In fact, it has a
-0 flag for the fastest preset. The
-6 flag is the default and is a good middle ground for most use cases. If you really need to push the compression for larger files, you can use the higher flags, which may take a very long time but may show some gains.
If you need even more compression and don’t care at about time, memory requirements, etc., you can use the
-e flag, which uses an alternate “extreme” compression variant. This can also modify its performance with numeric flags:
xz -e -9 large_file
This will take a long time and in the end, may not show very significant gains, but if you need that functionality, the option is available.
To decompress files, you pass the
-d flag again:
xz -d large_file.xz
This will decompress the data into a file called “large_file”.
While the individual compression methods are useful in their own right, most often you will see them paired with
tar to compress archives of files. This allows us to preserve directory structures, permissions, etc. of the files we wrap up.
tar command is actually very upfront about this relationship. It includes command line flags that can be used to automatically call an associated compression tool after the archival process is complete, all in one step.
To create a
tar archive that is then compressed with the
gzip utility, you can pass the
-z flag, which indicates that you wish to use
gzip compression on top of the archive. Actually,
tar flags don’t actually require the leading “
-” like most tools. A common idiom for accomplishing zipped archives is this:
<pre> tar czvf <span class=“highlight”>compressed</span>.tar.gz <span class=“highlight”>directory1</span> </pre>
This will create an archive (
-c) from a directory called “directory1”. It will create verbose output, compress the resulting archive with
gzip, and output to a file called “compressed.tar.gz” (a tar file that has been gzipped).
Once the file is created, we can peek inside by using the
-t flag instead of the creation flag:
tar tzvf compressed.tar.gz
drwxr-xr-x demouser/demouser 0 2014-03-19 18:31 directory1/ -rw-r--r-- demouser/demouser 5458 2014-03-19 18:31 directory1/httpd.conf.orig -rw-r--r-- demouser/demouser 2295 2014-03-19 18:31 directory1/nginx.conf.orig -rw-r--r-- demouser/demouser 5458 2014-03-19 18:21 directory1/httpd.conf
To later decompress the file and expand the archive, you can use the
tar xzvf compressed.tar.gz
This will recreate the directory structure in the current directory.
To use archiving with
bzip2, you can replace the
-z flag, which is
gzip-specific, with the
This means that the zipped archive creation command gets modified to this:
<pre> tar cjvf <span class=“highlight”>bzipcompressed</span>.tar.bz2 <span class=“highlight”>directory2</span> </pre>
Again, you can look at the files contained in the archive by passing the
tar tjvf bzipcompressed.tar.bz2
drwxr-xr-x demouser/demouser 0 2014-03-19 18:31 directory2/ -rw-r--r-- demouser/demouser 5458 2014-03-19 18:31 directory2/httpd.conf.orig -rw-r--r-- demouser/demouser 2295 2014-03-19 18:31 directory2/nginx.conf.orig -rw-r--r-- demouser/demouser 5458 2014-03-19 18:21 directory2/httpd.conf
You can extract the files and directory structure into the current directory by typing:
tar xjvf bzipcompressed.tar.bz2
Any remotely recent versions of
tar have added similar functionality for
xz compression. These follow the exact same format using the
<pre> tar cJvf <span class=“highlight”>xzcompressed</span>.tar.xz <span class=“highlight”>directory3</span> </pre>
To display info, use the same mechanism:
tar tJvf xzcompressed.tar.xz
drwxr-xr-x demouser/demouser 0 2014-03-19 18:31 directory3/ -rw-r--r-- demouser/demouser 5458 2014-03-19 18:31 directory3/httpd.conf.orig -rw-r--r-- demouser/demouser 2295 2014-03-19 18:31 directory3/nginx.conf.orig -rw-r--r-- demouser/demouser 5458 2014-03-19 18:21 directory3/httpd.conf
Follow the same patterns to extract:
tar xJvf xzcompressed.tar.xz
This will give you your full directory structure back intact.
Hopefully, you now have enough information to make an informed decision as to which compression method to favor in different circumstances. All of the compression schemes that we discussed in this post have very attractive strengths depending on the specific requirements of your situation.
It is important to be aware of the performance drawbacks and compatibility issues that may be inherent with each solution. How much weight you give these concerns depends entirely on the machines you are operating on and what kind of clients you must support. Most modern machines should not have to pay too much attention to these details, but they can cause issues if you blindly implement a compression type when interacting with older machines.
<div class=“author”>By Justin Ellingwood</div>
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.