By Jonah Aragon
Ajenti is an open source, web-based control panel that can be used for a large variety of server management tasks. The add-on package called Ajenti V allows you to manage multiple websites from the same control panel. By now you should have Ajenti and Ajenti V installed.
In this tutorial we will setup a basic website using Ajenti V from the Ajenti control panel and create an email account on your website’s domain.
For this tutorial, you will need:
https://panel.your_domain_name:8000/ opens the Ajenti control panel. Before we can setup your website at
http://your_domain_name/ and configure email addresses for your domain, there are a few DNS modifications that need to be made.
We need to add 2 records to make sure your website and email addresses work properly. Go to cloud.digitalocean.com/domains/ and click on the domain name you configured when setting up the Ajenti control panel and Ajenti V.
If you haven’t already, add an A record for the entire domain by filling out “@” in the HOSTNAME field, and selecting your Ajenti server or fililng out its IP address in the WILL DIRECT TO field. Click the Create Record button to add this initial A record. If
panel.example.com is not yet configured for your domain, repeat the above steps again, but use “panel” instead of “@” for the hostname.
Next, select the MX record type. In the HOSTNAME text box, enter
@. In the MAIL PROVIDERS MAIL SERVER, enter your domain name. In the PRIORITY text box, enter
10. Click the Create Record button to add the record.
If you are configuring the same domain that has the Ajenti control panel on it, you also need to add a TXT record. For instance, if you access Ajenti on
panel.example.com, you should add this record. If you access it on
panel.otherdomain.com, you do not need to add the TXT record.
To add the TXT record, select the TXT record type. In the HOSTNAME text box, enter
@. In the VALUE text box, paste this in:
v=spf1 a ip4:your_server_ip ~all (replacing the IP with your server’s IP). Click the Create Record button.
Your domain DNS settings should now look like this. Your specific domain will vary:
In your browser, browse to
https://panel.example.com/ and log into Ajenti. In the sidebar to the right, under the Web section, click Websites. The first time it may give you a notice that it is not active yet. Click the Enable button to allow Ajenti V to make the necessary config changes.
There is a section called New Website. Under that there is a Name text field. You can type anything you want to identify your website with in this field. Click the Create button, and you will notice your website is now listed under the Websites section at the top of the page. Click Manage next to your website.
Under the Website Files section, change
/srv/new-website to any directory, for example
/srv/example.com. Click the Set button, and then click the Create Directory button. Remember this directory. You will need to upload files to it soon.
Under the General tab, uncheck the Maintenance mode setting. Click Apply changes at the bottom of the page.
At the top of the page click on the Domains tab. Click the Add button, and type your domain name in the text field that appears. Click the Apply Changes button.
Now that you have a directory for your website files, you need some files to go in it.
Under the Tools section in the sidebar, click File Manager. Click on the folder names to navigate to the directory you created for the website files such as
/srv/example.com. The folder should be empty. Here you can upload whatever files and folders you would like for your static website.
For the purposes of this tutorial, we are going to make a simple “Hello world!” document on the website. Click the New File button at the top of the screen. A file named
new file should appear in the folder. At the end of the line for the file, click the menu button.
In the Name field, change
new file to
index.html. Click Save, and open that same menu again. This time, click the Edit button to open a Notepad. The following text is an example of what you could enter to ensure your website is working. Of course, you can enter anything you’d like here instead.
<!DOCTYPE html> <html> <head> <title>This website is working!</title> </head> <body> <h1>Hello, world!</h1> <p>If you can read this correctly, your website is functional!</p> </body> </html>
Click Save at the top of the Notepad, and the file will go live.
Repeat these steps as needed to build your website. You can also make use of the File Manager’s upload function. Back in File Manager, towards the bottom of the screen there is a button titled Choose File. You can click that and a normal prompt to choose a file from your computer to upload will appear. From here, any files you select will be uploaded to the site.
Browse to your domain name such as
http://example.com in your web browser. If you see the “Hello World!” page you made in the last step, everything works!
You can choose to finish now or read on to create your own email account for your own domain.
Now we will make an email account with your registered domain name.
Go to your Ajenti Control Panel. Under the Web section, click Mail. Click the Enable button if prompted. Under New Mailbox there are a few sections to fill out. The Address text box is whatever you want to come before the @ sign in your email address. If you enter
sammy here, your email will be
email@example.com. There is also a dropdown box to select a domain. If you have more than one website configured with Ajenti V, there will be multiple options here. Don’t put anything in the Custom domain field. After you’ve filled out this information, click + Mailbox.
As you can see, your new email address now appears under the Mailboxes section of this page. Click it, and then click the Change password link. Type a new password for your mailbox, press ENTER, and then click Apply Changes at the bottom of the screen.
Now click the Advanced tab at the top of the page. In the TLS section, check the box next to enable, then click the Generate new certificate button. After you’re done, click Apply changes at the bottom of the page. This increases security when connecting to your mailbox and increases compatibility with email clients.
To retrieve your email, you can connect with an email client (like Outlook, Thunderbird, K-9 Mail, etc.) or you can install RainLoop, a webmail program for accessing your mail in a browser in Ajenti.
To connect to this mailbox in an email client, the following information should be useful:
Username: firstname.lastname@example.org Password: your_mailbox_password IMAP Server: panel.example.com IMAP Port: 143 IMAP Encryption: STARTTLS (Accept all certificates) SMTP Server: panel.example.com SMTP Port: 25 SMTP Encryption: None
You should now have a working email account and website for your domain name. They were both created within the Ajenti V Control Panel and can both be modified with the same control panel.
Check out Installing the RainLoop Email Client on Ajenti V if you want to learn how to install a web-based email client on your server.
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up now
Ajenti is an open source, web-based control panel that can be used for a large variety of server management tasks. It can install packages and run commands, and you can view basic server information such as RAM in use, free disk space, etc. All this can be accessed from a web browser.
Optionally, an add-on package called Ajenti V allows you to manage multiple websites from the same control panel and easily configure email accounts for your domains.
This textbox defaults to using Markdown to format your answer.
You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!
Thanks for your awesome tutorial i loved the way you do it ^_^.
I have a problem with the website path, I changed it to /srv/my_domain (Same domain with the panel.my_domain i added TXT records) and i clicked the Set button, and clicked the Create Directory button. However, For some reason the domain path is /var/www/html/ i tried to add new domain to try maybe i did something wrong, But i got the same problem!
Can you help me please ?
Is it possible to use Ajenti in a situation where you have multiple droplets that are DB or block storage servers?
Thanks so much for the detailed tutorial. It worked great for creating the website and email. The only problem that I’m facing now is that I can only receive emails and but cannot send any emails. I’m using the info email for sending notifications from WordPress to my users and all of them return with failed delivery message. I double and triple checked all my settings and they look as described in the tutorial. Looked in the error log for mail and noticed this ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly broken My droplet is running on Ubuntu 14.04 & WordPress installed on LAMP.
Any help is greatly appreciated :) Mason
Hi i’m not sure if this is related. I’ve installed Ajenti and have a Wordpress website and in my contact page I have a contact form using Contact Form 7 plugin. I tried to test the form but it failed. I’m getting a server error. Can you help point the way to where I can figure this out?
Thanks in advance,
Hi, I followed the tutorial and looked everywhere, but when I install Ajenti V, I only get websites under the WEB tab, and not websites and mail. I’m not sure what I’m doing wrong. Any thoughts?
This comment has been deleted
why there is no web section on my panel ?
@jonaharagon This is awesome tutorial
i have problem when add mail. when click “Custom Domain” dropdown, there’s no domain available, just “custom domain”. if i add domain in custom domain field, is it ok? or there’s setting to show domain from dropdown?
@Sitihajar So your email is sending but outlook.com is the only service not receiving them? Perhaps they are going into spam? Do you get a bounce back message after attempting to send to outlook.com?
Why is there no, and how can I set up, encryption on SMTP. Is there a reason why you didn’t configure that?