In this two-part tutorial, you will learn how to configure a Linux service to restart automatically after a reboot or crash using
Part One covers general Linux service management concepts like the
init daemon and runlevels. It ends with a demonstration of service management in
systemd. Here you will examine
Part Two offers a step-by-step tutorial for completing a practical and common
systemd task. Specifically, you will configure a MySQL database server to automatically start after a crash or reboot.
Note: You might also consider reading our very popular tutorial on using
systemctl to control systemd services and units.
To complete this tutorial, you will need:
Linux services can be made self-healing largely by changing the way they are handled by the service management daemon, also known as the
init is the first process that starts in a Linux system after the machine boots and the kernel loads into memory. Among other things, it decides how a user process or a system service should load, in what order, and whether it should start automatically.
As Linux has evolved, so has the behavior of the
init daemon. Originally, Linux started out with System V
init, the same that was used in Unix. Since then, Linux has implemented the Upstart
init daemon (created by Ubuntu), and now the systemd
init daemon (first implemented by Fedora).
Most modern Linux distributions have gradually migrated away from System V and currently using systemd. Older style
init (if used) is kept only for backward compatibility. FreeBSD, a variant of UNIX, uses a different System V implementation, known as BSD
We will cover systemd in this article as this is the most recent and common service manager used in Linux distributions today. However, we will also talk about System V and Upstart when necessary and see how systemd evolved from there. To give you an idea:
initsystem, used in
To understand the
init daemon, let’s start with something called runlevel.
A runlevel represents the current state of a Linux system. For example, a runlevel can be the shutdown state of a Linux server, a single-user mode, the restart mode, etc. Each mode will dictate what services can be running in that state.
Some services can run in one or more runlevel but not in others. Runlevels are denoted by a value between 0 and 6. The following list shows what each of these levels means:
Runlevels 2, 3, and 4 vary by distribution. For example, some Linux distributions don’t implement runlevel 4, while others do. Some distributions have a clear distinction between these three levels. In general, runlevel 2, 3, or 4 means a state where Linux has booted in multi-user, network-enabled, text mode.
When you enable a service to auto-start, Linux is actually adding it to a runlevel. In System V, for example, the OS will start with a particular runlevel; and, when it starts, it will try to start all the services that are associated with that runlevel. In systemd, runlevel has become target, and when a service is made to auto-start, it’s added to a target. We’ll discuss targets later in this article.
System V uses an
inittab file, which later
init methods have kept for backward compatibility. Let’s run through System V’s startup sequence:
initdaemon is created from the binary file /sbin/init
initdaemon reads is /etc/inittab
initdaemon looks further into the /etc/inittab file and reads what
initscripts it needs to run for that runlevel
So, when the
init daemon finds what
init scripts its needs to run for the given runlevel, it’s actually finding out what services it needs to start up. These
init scripts are where you can configure startup behavior for individual services.
init script is what controls a specific service in System V.
init scripts for services were either provided by the application’s vendor or came with the Linux distribution (for native services). You can also create your own
init script for a custom created service.
When a process or service such as MySQL Server starts under System V, its binary program file has to load into memory. Depending on how the service is configured, this program may continuously execute the background (and accept client connections). The job of starting, stopping, or reloading this binary application is handled by the service’s
init script. It’s called the
init script because it initializes the service.
In System V, an
init script is a shell script. They are also called
rc (run command) scripts. The scripts are located under the
/etc/init.d directory. These scripts are symlinked to the
/etc/rc directories. Within the
/etc directory, there are a number of
rc directories, each with a number in its name. The numbers represent different runlevels. So we have
/etc/rc2.d and so on.
To make a service restart after a crash or reboot, you can usually add a line like this to the
- ms:2345:respawn:/bin/sh /usr/bin/service_name
To enable a System V service to start at system boot time, run this command:
- sudo chkconfig service_name on
To disable it, run this command:
- sudo chkconfig service_name off
To check the status (running or stopped), run this command
- sudo service service_name status
As the serialized way of loading jobs and services became more time consuming and complex with System V
init, the Upstart daemon was introduced for faster loading of the OS, graceful clean-up of crashed services, and predictable dependency between system services.
init was better than System V
init in a few ways:
To keep things simple, Upstart is backward-compatible with System V. The
/etc/init.d/rc script still runs to manage native System V services. Its main difference is the way it allows multiple events to be associated with a service. This event-based architecture allowed Upstart to be a flexible service manager. With Upstart, each event can fire off a shell script that takes care of that event. These events included:
In between these events, a service can be in a number of states, like waiting, pre-start, starting, running, pre-stop, stopping, etc. Upstart could take action for each of these states as well, creating a very flexible architecture.
At startup, Upstart will run any System V
init scripts normally. It will then look under the
/etc/init directory and execute the shell commands in each service configuration file. Among other things, these files controlled the service’s startup behavior.
The files have a naming style of
service_name.conf, and they have plain text content with different sections, called stanzas. Each stanza describes a different aspect of the service and how it should behave. To make a service start automatically after a crash or reboot, you can add the
respawn command in its service configuration files, as shown below for the cron service.
... description "regular background program processing daemon" start on runlevel  stop on runlevel [!2345] expect fork **respawn** exec cron
The latest in Linux
init daemons is systemd. In fact, it’s more than an
init daemon: systemd is a framework that encompasses many components of a modern Linux system.
One of its functions is to work as a system and service manager for Linux. In this capacity, systemd controls how a service should behave if it crashes or the machine reboots. You can read about systemd’s systemctl here.
systemd is backward-compatible with System V commands and initialization scripts. That means any System V service will also run under systemd. This is possible because most Upstart and System V administrative commands have been modified to work under systemd.
At the heart of systemd are unit files. Each unit file represents a specific system resource. Information about the resource is kept track of in the unit file. Service unit files are simple text files (like Upstart .conf files) with a declarative syntax. This makes the files easy to understand and modify.
The main difference between systemd and the other two
init methods is that systemd is responsible for the initialization of service daemons and other types of resources like device operating system paths, mount points, sockets, etc. The naming style for a unit file is
service_name.unit_type. So, you will see files like
In Red Hat-based systems like CentOS, unit files are located in two places. The main location is
/lib/systemd/system/. Custom-created unit files or existing unit files modified by system administrators will live under
If a unit file with the same name exists in both locations, systemd will use the one under
/etc. Suppose a service is enabled to start at boot time or any other target/runlevel. In that case, a symbolic link will be created for that service unit file under appropriate directories in
/etc/systemd/system. Unit files under
/etc/systemd/system are actually symbolic links to the files with the same name under
initSequence: Target Units
A special type of unit file is a target unit.
A target unit filename is suffixed by .target. Target units are different from other unit files because they don’t represent one particular resource. Rather, they represent the state of the system at any one time. Target units do this by grouping and launching multiple unit files that should be part of that state. systemd targets can therefore be loosely compared to System V runlevels, although they are not the same.
Each target has a name instead of a number. For example, we have
multi-user.target instead of
runlevel 3 or
reboot.target instead of
runlevel 6. When a Linux server boots with say,
multi-user.target, it’s essentially bringing the server to
runlevel 2, 3, or 4, which is the multi-user text mode with networking enabled.
How it brings the server up to that stage is where the difference lies. Unlike System V, systemd does not bring up services sequentially. Along the way, it can check for the existence of other services or resources and decide the order of their loading. This makes it possible for services to load in parallel.
Another difference between target units and runlevels is that in System V, a Linux system could exist in only one runlevel. You could change the runlevel, but the system would exist in that new runlevel only. With systemd, target units can be inclusive, which means when a target unit activates, it can ensure other target units are loaded as part of it.
For example, a Linux system that boots with a graphical user interface will have the graphical.target activated, which in turn will automatically ensure multi-user.target is loaded and activated as well. In System V terms, that would be like having runlevels 3 and 5 activated simultaneously.
The table below compares runlevels and targets:
|Runlevel (System V init)||Target Units (Systemd)|
|runlevel 2, 3, 4||multi-user.target|
default.target is equivalent to the System V default runlevel.
System V had the default runlevel defined in a file called inittab. In systemd, that file is replaced by default.target. The default target unit file lives under /etc/systemd/system directory. It’s a symbolic link to one of the target unit files under /lib/systemd/system.
When you change the default target, you are essentially recreating that symbolic link and changing the system’s runlevel.
The inittab file in System V also specified which directory Linux will execute its
init scripts from: it could be any of the rcn.d directories. In systemd, the default target unit determines which resource units will be loaded at boot time.
As units are activated, they are activated all in parallel or all in sequence. How a resource unit loads may depend on other resource units it wants or requires.
systemd wants and requires control how systemd addresses dependency among service daemons.
As mentioned before, Upstart ensures parallel loading of services using configuration files. In System V, a service could start in a particular runlevel, but it also could be made to wait until another service or resource became available. In a similar fashion, systemd services can be made to load in one or more targets, or wait until another service or resource became active.
In systemd, a unit that requires another unit will not start until the required unit is loaded and activated. If the required unit fails for some reason while the first unit is active, the first unit will also stop.
This ensures system stability. A service that requires a particular directory to be present can thus be made to wait until the mount point to that directory is active. On the other hand, a unit that wants another unit will not impose such restrictions. It won’t stop if the wanted unit stops when the caller is active. An example of this would be the non-essential services that come up in graphical-target mode.
To understand service startup behavior under systemd, we are using a CentOS 8.3 Droplet. We will follow the .target rabbit-trail as far as we can. systemd’s startup sequence follows a long chain of dependencies.
First, let’s run this command to list the default target unit file:
- sudo ls -l /etc/systemd/system/default.target
This shows output like the following:
Outputlrwxrwxrwx. 1 root root 37 Dec 4 17:42 /etc/systemd/system/default.target -> /lib/systemd/system/multi-user.target
As you can see, the default target is actually a symbolic link to the multi-user target file under /lib/systemd/system/. So, the system is supposed to boot under multi-user.target, which is similar to runlevel 3 in System V init.
Next, let’s run the following command to check all the services the multi-user.target file wants:
- sudo ls -l /etc/systemd/system/multi-user.target.wants/*.service
This should show a list of symbolic link files, pointing back to actual unit files under /usr/lib/systemd/system/:
Outputlrwxrwxrwx. 1 root root 38 Dec 4 17:38 /etc/systemd/system/multi-user.target.wants/auditd.service -> /usr/lib/systemd/system/auditd.service lrwxrwxrwx. 1 root root 39 Dec 4 17:39 /etc/systemd/system/multi-user.target.wants/chronyd.service -> /usr/lib/systemd/system/chronyd.service lrwxrwxrwx. 1 root root 37 Dec 4 17:38 /etc/systemd/system/multi-user.target.wants/crond.service -> /usr/lib/systemd/system/crond.service lrwxrwxrwx. 1 root root 42 Dec 4 17:39 /etc/systemd/system/multi-user.target.wants/irqbalance.service -> /usr/lib/systemd/system/irqbalance.service lrwxrwxrwx. 1 root root 37 Dec 4 17:41 /etc/systemd/system/multi-user.target.wants/kdump.service -> /usr/lib/systemd/system/kdump.service ...
multi-user.target, there are different types of targets like
basic.target. To see what targets the multi-user target depends on, run the following command:
- sudo systemctl show --property "Requires" multi-user.target | fmt -10
The output shows:
You can run the following command to see if there are any required units for basic.target:
- sudo systemctl show --property "Requires" basic.target | fmt -10
As it turns out, the basic.target requires sysinit.target:
And it wants a few targets as well:
- sudo systemctl show --property "Wants" basic.target | fmt -10
The command will return the following:
OutputWants=slices.target paths.target timers.target microcode.service sockets.target sysinit.target
Going recursively, you can see if the sysinit.target will require any other targets to be running as well:
- sudo systemctl show --property "Requires" sysinit.target | fmt -10
There will be none. However, there will be other targets wanted by sysinit.target:
- systemctl show --property "Wants" sysinit.target | fmt -10
An output like this will appear:
OutputWants=systemd-random-seed.service dev-mqueue.mount rngd.service systemd-modules-load.service proc-sys-fs-binfmt_misc.automount local-fs.target sys-fs-fuse-connections.mount systemd-sysusers.service systemd-update-done.service systemd-update-utmp.service systemd-journal-flush.service dev-hugepages.mount dracut-shutdown.service swap.target systemd-udevd.service import-state.service sys-kernel-debug.mount nis-domainname.service systemd-journald.service selinux-autorelabel-mark.service kmod-static-nodes.service loadmodules.service ldconfig.service cryptsetup.target systemd-sysctl.service systemd-ask-password-console.path systemd-journal-catalog-update.service systemd-udev-trigger.service systemd-tmpfiles-setup.service systemd-hwdb-update.service sys-kernel-config.mount systemd-binfmt.service systemd-tmpfiles-setup-dev.service systemd-machine-id-commit.service systemd-firstboot.service
Going a step further now, let’s look inside a service unit file, the one for sshd:
- sudo vi /etc/systemd/system/multi-user.target.wants/sshd.service
It looks like this:
[Unit] Description=OpenSSH server daemon Documentation=man:sshd(8) man:sshd_config(5) After=network.target sshd-keygen.target Wants=sshd-keygen.target [Service] Type=notify EnvironmentFile=-/etc/crypto-policies/back-ends/opensshserver.config EnvironmentFile=-/etc/sysconfig/sshd ExecStart=/usr/sbin/sshd -D $OPTIONS $CRYPTO_POLICY ExecReload=/bin/kill -HUP $MAINPID KillMode=process Restart=on-failure RestartSec=42s [Install] WantedBy=multi-user.target
You can see the service unit file is clean and easy to understand.
The first important part is the After clause in the
[Unit] section. This says the sshd service needs to load after the network.target and the sshd-keygen.target are loaded.
[Install] section shows the service is wanted by the multi-user.target. This means multi-user.target will load the sshd daemon, but it won’t shut down or crash if sshd fails during loading.
multi-user.target is the default target, sshd daemon is supposed to start at boot time. In the
[Service] section, the
Restart parameter has the value
on-failure. This setting allows the sshd daemon to restart if it crashes or has an unclean exit.
In this article you learned about System V, Upstart, and systemd service management daemons. You explored startup scripts and configuration files, important parameters, startup sequence, and the commands that control service startup behavior.
In part two of this article, we will apply these skills to a real-life example and use systemd to configure MySQL. Once completed, your MySQL instance will automatically restart after a reboot or crash. And while you will use MySQL as your example application, you can substitute any number of services, such as the Nginx or Apache web servers.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up
This series gives practical examples of and teaches the theory behind making your applications run like services. It explores the init systems of System V, Upstart, and systemd from the perspective of service startup.