Tutorial

How To Enable SFTP Without Shell Access on Ubuntu 18.04

How To Enable SFTP Without Shell Access on Ubuntu 18.04
Not using Ubuntu 18.04?Choose a different version or distribution.
Ubuntu 18.04

Introduction

SFTP stands for SSH File Transfer Protocol. As its name suggests, it’s a secure way to transfer files between machines using an encrypted SSH connection. Despite the name, it’s a completely different protocol than FTP (File Transfer Protocol), though it’s widely supported by modern FTP clients.

SFTP is available by default with no additional configuration on all servers that have SSH access enabled. It’s secure and easy to use, but comes with a disadvantage: in a standard configuration, the SSH server grants file transfer access and terminal shell access to all users with an account on the system.

In some cases, you might want only certain users to be allowed file transfers and no SSH access. In this tutorial, we’ll set up the SSH daemon to limit SFTP access to one directory with no SSH access allowed on per-user basis.

Prerequisites

To follow this tutorial, you will need access to an Ubuntu 18.04 server. This server should have a non-root user with sudo privileges, as well as a firewall enabled. For help with setting this up, follow our Initial Server Setup Guide for Ubuntu 18.04.

Step 1 — Creating a New User

First, create a new user who will be granted only file transfer access to the server. Here, we’re using the username sammyfiles, but you can use any username you like.

  1. sudo adduser sammyfiles

You’ll be prompted to create a password for the account, followed by some information about the user. The user information is optional, so you can press ENTER to leave those fields blank.

You have now created a new user that will be granted access to the restricted directory. In the next step we will create the directory for file transfers and set up the necessary permissions.

Step 2 — Creating a Directory for File Transfers

In order to restrict SFTP access to one directory, we first have to make sure the directory complies with the SSH server’s permissions requirements, which are very particular.

Specifically, the directory itself and all directories above it in the filesystem tree must be owned by root and not writable by anyone else. Consequently, it’s not possible to simply give restricted access to a user’s home directory because home directories are owned by the user, not root.

Note: Some versions of OpenSSH do not have such strict requirements for the directory structure and ownership, but most modern Linux distributions (including Ubuntu 18.04) do.

There are a number of ways to work around this ownership issue. In this tutorial, we’ll create and use /var/sftp/uploads as the target upload directory. /var/sftp will be owned by root and will not be writable by other users; the subdirectory /var/sftp/uploads will be owned by sammyfiles, so that user will be able to upload files to it.

First, create the directories.

  1. sudo mkdir -p /var/sftp/uploads

Set the owner of /var/sftp to root.

  1. sudo chown root:root /var/sftp

Give root write permissions to the same directory, and give other users only read and execute rights.

  1. sudo chmod 755 /var/sftp

Change the ownership on the uploads directory to sammyfiles.

  1. sudo chown sammyfiles:sammyfiles /var/sftp/uploads

Now that the directory structure is in place, we can configure the SSH server itself.

Step 3 — Restricting Access to One Directory

In this step, we’ll modify the SSH server configuration to disallow terminal access for sammyfiles but allow file transfer access.

Open the SSH server configuration file using nano or your favorite text editor.

  1. sudo nano /etc/ssh/sshd_config

Scroll to the very bottom of the file and append the following configuration snippet:

/etc/ssh/sshd_config
. . .

Match User sammyfiles
ForceCommand internal-sftp
PasswordAuthentication yes
ChrootDirectory /var/sftp
PermitTunnel no
AllowAgentForwarding no
AllowTcpForwarding no
X11Forwarding no

Then save and close the file.

Here’s what each of those directives do:

  • Match User tells the SSH server to apply the following commands only to the user specified. Here, we specify sammyfiles.
  • ForceCommand internal-sftp forces the SSH server to run the SFTP server upon login, disallowing shell access.
  • PasswordAuthentication yes allows password authentication for this user.
  • ChrootDirectory /var/sftp/ ensures that the user will not be allowed access to anything beyond the /var/sftp directory.
  • AllowAgentForwarding no, AllowTcpForwarding no. and X11Forwarding no disables port forwarding, tunneling and X11 forwarding for this user.

This set of commands, starting with Match User, can be copied and repeated for different users too. Make sure to modify the username in the Match User line accordingly.

Note: You can omit the PasswordAuthentication yes line and instead set up SSH key access for increased security. Follow the Copying your Public SSH Key section of the SSH Essentials: Working with SSH Servers, Clients, and Keys tutorial to do so. Make sure to do this before you disable shell access for the user.

In the next step, we’ll test the configuration by SSHing locally with password access, but if you set up SSH keys, you’ll instead need access to a computer with the user’s keypair.

To apply the configuration changes, restart the service.

  1. sudo systemctl restart sshd

You have now configured the SSH server to restrict access to file transfer only for sammyfiles. The last step is testing the configuration to make sure it works as intended.

Step 4 — Verifying the Configuration

Let’s ensure that our new sammyfiles user can only transfer files.

Logging in to the server as sammyfiles using normal shell access should no longer be possible. Let’s try it:

  1. ssh sammyfiles@localhost

You’ll see the following message before being returned to your original prompt:

Error message
This service allows sftp connections only. Connection to localhost closed.

This means that sammyfiles can no longer can access the server shell using SSH.

Next, let’s verify if the user can successfully access SFTP for file transfer.

  1. sftp sammyfiles@localhost

Instead of an error message, this command will show a successful login message with an interactive prompt.

SFTP prompt
Connected to localhost. sftp>

You can list the directory contents using ls in the prompt:

  1. ls

This will show the uploads directory that was created in the previous step and return you to the sftp> prompt.

SFTP file list output
uploads

To verify that the user is indeed restricted to this directory and cannot access any directory above it, you can try changing the directory to the one above it.

  1. cd ..

This command will not give an error, but listing the directory contents as before will show no change, proving that the user was not able to switch to the parent directory.

You have now verified that the restricted configuration works as intended. The newly created sammyfiles user can access the server only using the SFTP protocol for file transfer and has no ability to access the full shell.

Conclusion

You’ve restricted a user to SFTP-only access to a single directory on a server without full shell access. While this tutorial uses only one directory and one user for brevity, you can extend this example to multiple users and multiple directories.

The SSH server allows more complex configuration schemes, including limiting access to groups or multiple users at once, or even limited access to certain IP addresses. You can find examples of additional configuration options and explanation of possible directives in the OpenSSH Cookbook. If you run into any issues with SSH, you can debug and fix them with this troubleshooting SSH series.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors
Default avatar

Software Engineer, CTO @Makimo

Creating bespoke software ◦ CTO & co-founder at Makimo. I’m a software enginner & a geek. I like making impossible things possible. And I need tea.


Default avatar

Manager, Developer Education

Technical Writer @ DigitalOcean


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
7 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Hi, I followed all steps but I get this error when I try to connect (ssh or sftp):

packet_write_wait: Connection to xxx.xx.xxx.xxx port 22: Broken pipe

Hi

I have followed same steps and everything is fine. But showing access denied after added password. I have create new dir and under HTML and allowing that dir to user to use. But not accepting my password.

Please let me, Where I am wrong.

works like charm for me, thanks a bunch!

Regarding comment: #78000 / giacomofabbian March 16, 2019

Subsystem sftp /usr/lib/openssh/sftp-server ‘comment this out’ Subsystem sftp internal-sftp ‘add this line’

Be aware that if by following these instructions, your problem is solved, then you are/were likely missing the sftp-server binary file.

You can check for its existence via:

find / -name sftp-server

Some good information on the topic and as to why you would use one over the other can be found here :

Thanks for the guide, I got this working. For some reason it’s quite slow. When I use SCP, I can get transfer speeds of at least 500kb/s, however with SFTP, I only get 80kb/s, and deleting folders is quite slow.

Any ideas if this can be addressed?

I solve your error @rabitt @marvin007dd76bbbc17604d944 @mmmrev with this:

"I was getting this error as well:

Error: Network error: Software caused connection abort Error: Could not connect to server

One entry in the sshd_config file that was omitted by the author:

Subsystem sftp /usr/lib/openssh/sftp-server ‘comment this out’ Subsystem sftp internal-sftp ‘add this line’

Once added commented out the top line and added the second line, I was able to connect without any problems."

Many thanks to @barryd solution found on tutorial for ubuntu 16.04

Please update the tutorial @mdrake @mati

I followed the tutorial on a new installation with ufw disabled and ssh default settings on but when I try to ssh or sftp into the server, I get the following response: Connection reset by xxx.xxx.xxx.x port 22.

How can I resolve this?

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more