This article covers a version of Ubuntu that is no longer supported. If you are currently operate a server running Ubuntu 12.04, we highly recommend upgrading or migrating to a supported version of Ubuntu:
Reason: Ubuntu 12.04 reached end of life (EOL) on April 28, 2017 and no longer receives security patches or updates. This guide is no longer maintained.
This guide might still be useful as a reference, but may not work on other Ubuntu releases. If available, we strongly recommend using a guide written for the version of Ubuntu you are using. You can use the search functionality at the top of the page to find a more recent version.
Apache is the most popular web server in the world. It is responsible for serving over half of the active sites on the internet and can handle the needs of both large and small projects.
In this guide, we will be covering some common, useful modules that can add functionality and improve your experience when working with Apache. They can help you optimize, secure, and monitor your server.
We will be using an Ubuntu 12.04 VPS to explore these modules, but most distributions should operate in a similar way. Consult your distribution's documentation for Apache-specific file locations.
The mod_pagespeed module is an Apache enhancement that optimizes your content automatically. It can compress data, implement caching, resize files, and remove unnecessary whitespace from configuration files.
There are binaries on the project's webpage for Ubuntu. To download and install on a 64-bit Ubuntu system, type the following:
cd wget https://dl-ssl.google.com/dl/linux/direct/mod-pagespeed-stable_current_amd64.deb sudo dpkg -i mod-pagespeed-*.deb sudo apt-get -f install sudo service apache2 reload
On a 32-bit Ubuntu system, type:
cd wget https://dl-ssl.google.com/dl/linux/direct/mod-pagespeed-stable_current_i386.deb sudo dpkg -i mod-pagespeed-*.deb sudo apt-get -f install sudo service apache2 reload
The configuration file is located at "/etc/apache2/mods-available/pagespeed.conf".
This module is enabled when it is installed and should begin optimizing content when you reload the server, but you can configure many different optimization and monitoring functions from within the configuration file. Follow our guide on how to configure mod_pagespeed on Ubuntu or Debian.
The mod_security module provides a configurable security layer that can accept or deny traffic based upon rules set by the administrator. It is an application firewall that can prevent exposing vulnerabilities to the internet.
This module is in Ubuntu's default repositories, so it can be installed with the following command:
sudo apt-get install libapache2-modsecurity
You can enable the module with this command:
sudo a2enmod mod-security
The configuration file in the normal "/etc/apache2/mods-available" directory is called "mod-security.conf", but this only references the files in "/etct/modsecurity".
We can move the default example file into production with the following commands:
cd /etc/modsecurity sudo cp modsecurity.conf-recommended modsecurity.conf
Open the configuration file with root privileges:
sudo nano modsecurity.conf
Read the configuration file and adjust the values based on the needs of your site. Most of the default configuration settings are okay. You might want to adjust the "SecRequestBodyLimit" to something a bit more permissive than the default 128 KB limit.
When you are ready to apply the settings, you can change the "SecRuleEngine" rule to read "On" instead of "DetectionOnly":
#SecRuleEngine DetectionOnly SecRuleEngine On
This will implement your rules and begin applying them to your sites. You will need to reload your Apache instance for these rules to take affect:
sudo service apache2 reload
One of the most helpful and easiest modules to configure comes pre-installed and configured when you install Apache on Ubuntu. The mod_status module provides an overview of your server load and requests.
You can edit the configuration file in the "mods-available" directory with the following command:
sudo nano /etc/apache2/mods-available/status.conf
Under the "Location /server-status" directive, remove the "#" character from before the "192.0.2.0/24" line and add the IP address of the computer you will be using to access your web server:
<Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 ::1 Allow from Your.IP.Address.Here </Location>
Once again, be sure that the IP address you input is the computer you are using to access the server, and not the server's IP address.
Reload Apache so that it can re-read the new configuration changes:
sudo service apache2 reload
Navigate to the server-status page you have defined by typing the following into your web browser:
Apache Server Status for 126.96.36.199 Server Version: Apache/2.2.22 (Ubuntu) Server Built: Jul 12 2013 13:37:15 Current Time: Thursday, 08-Aug-2013 16:36:48 UTC Restart Time: Thursday, 08-Aug-2013 16:04:59 UTC Parent Server Generation: 2 Server uptime: 31 minutes 49 seconds Total accesses: 3 - Total Traffic: 0 kB CPU Usage: u0 s0 cu0 cs0 . . .
You will be given a stats page that will give you information and text-based indications of your server's performance and load. Rapidly refreshing the page will allow you to see how activity is shown.
The Spamhaus module enables you to block attackers by denying request from a blacklist of IP addresses that are known to be bad.
Once again, this module is in Ubuntu's default repositories. Install is with the following command:
sudo apt-get install libapache2-mod-spamhaus
To configure, look at the "mod-spamhaus.conf" file within the "mods-available" directory:
sudo nano /etc/apache2/mods-available/mod_spamhaus.conf
You can configure the module to filter based on a number of different criteria. With the "MS_METHODS" definition, you can check the IP whenever the client uses any of the HTTP methods recognized. This can prevent those IPs from flooding the server.
The module also allows you to configure a whitelist, maintain a local version of the DNS blacklist, and adjust cache parameters.
The module should have been enabled on installation, but we can double-check and reload apache to enable the filtering with these commands:
sudo a2enmod mod-spamhaus sudo service apache2 reload
One of the most useful modules for Apache is mod_rewrite. This module allows you to generate unique and easily readable urls for content requested on the server.
The module is installed on Ubuntu by default when Apache is installed, but it is not enabled. To rectify this situation, issue the following command:
sudo a2enmod rewrite sudo service apache2 reload
Configuration for mod_rewrite doesn't take place in the "mods-available" directory. Instead, it uses .htaccess files or declarations within normal server configuration files to decide what to do.
The full configuration details are outside of the scope of this article. However, we do have a detailed article on how to set up mod_rewrite here.
This is by no means an exhaustive list of modules for Apache, but merely an introduction. By now, you should be able to see some of the variety of modules available to modify the standard Apache behavior.
Keep in mind that with every piece of code that you add to a server, there exists the possibility that you are opening up vulnerabilities and creating more overhead. Try to choose modules that are well-tested and commonly implemented. Only enable the modules that are actively needed for your sites.
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.
This textbox defaults to using Markdown to format your answer.
You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!
Click below to sign up and get $200 of credit to try our products over 60 days!
any one can tell me how to access servername/server-status instead localhost/server-status ? thanks
example : original.buddypress/server-status
This works for the pagespeed module on Ubuntu 14.04: https://developers.google.com/speed/pagespeed/module/download
can you rewrite the same tutorial for Ubuntu 14.04 ? some of the mods are not available in 14.04…
Install with command:
sudo dpkg -i mod-pagespeed-*.deb
While trying to install dpkg -i mod-pagespeed-.deb i am getting a message says ‘no action available’ not able to install dpkg -i mod-pagespeed-.deb
@yconst: I believe it should be <strong>mod-spamhaus</strong>. Did it not work for you?
Shouldn’t it be: sudo a2enmod spamhaus
Instead of: sudo a2enmod mod-spamhaus
For mod_rewrite you must go to /etc/apache2/sites-available/default and you will see something like this:
<Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride XXXXXXXXXXXXXXXXXXX Order allow,deny allow from all </Directory>
You have to set AllowOverride to All
@layne.heiny: Responded here: