Django is a free and open-source web framework written in Python that adheres to the model template view (MTV) software architectural pattern. The MTV pattern is Django’s take on the model–view–controller (MVC) pattern. According to the Django Software Foundation, the model is the single definitive source of your data, the view describes the data that gets represented to the user via a Python callback function to a specific URL, and the template is how Django generates HTML dynamically.
Django’s core principles are scalability, re-usability and rapid development. It is also known for its framework-level consistency and loose coupling, allowing for individual components to be independent of one another. Don’t repeat yourself (DRY programming) is an integral part of Django principles.
In this tutorial, we will set up a Django development environment. We’ll install Python 3, pip 3, Django and
virtualenv in order to provide you with the tools necessary for developing web applications with Django.
A non-root user account with
sudo privileges set up on a Debian or Ubuntu Linux server. You can achieve these prerequisites by following and completing the initial server setup for Debian 8, or steps 1-4 in the initial server setup for Ubuntu 16.04 tutorial.
To install Python we must first update the local APT repository. In your terminal window, we’ll input the command that follows. Note that the
-y flag answers “yes” to prompts during the upgrade process. Remove the flag if you’d like the upgrade to stop for each prompt.
- sudo apt-get update && sudo apt-get -y upgrade
When prompted to configure
grub-pc, you can press
ENTER to accept the default, or configure as desired.
It is recommended by the Django Software Foundation to use Python 3, so once everything is updated, we can install Python 3 by using the following command:
- sudo apt-get install python3
To verify the successful installation of Python 3, run a version check with the python3 command:
- python3 -V
The resulting output will look similar to this:
Now that we have Python 3 installed, we will also need pip in order to install packages from PyPi, Python’s package repository.
- sudo apt-get install -y python3-pip
To verify that pip was successfully installed, run the following command:
- pip3 -V
You should see output similar to this:
Outputpip 8.1.1 from /usr/lib/python3/dist-packages (python 3.5)
Now that we have pip installed, we have the ability to quickly install other necessary packages for a Python environment.
virtualenv is a virtual environment where you can install software and Python packages in a contained development space, which isolates the installed software and packages from the rest of your machine’s global environment. This convenient isolation prevents conflicting packages or software from interacting with each other.
To install virtualenv, we will use the pip3 command, as shown below:
- pip3 install virtualenv
Once it is installed, run a version check to verify that the installation has completed successfully:
- virtualenv --version
We should see the following output, or something similar:
Outputvirtualenv 20.0.20 from /home/sammy/.local/lib/python3.5/site-packages/virtualenv/__init__.py
You have successfully installed virtualenv.
At this point, we can isolate our Django web application and its associated software dependencies from other Python packages or projects on our system.
There are three ways to install Django. We will be using the pip method of installation for this tutorial, but let’s address all of the available options for your reference.
Option 1: Install Django within a
This is ideal for when you need your version of Django to be isolated from the global environment of your server.
Option 2: Install Django from Source. If you want the latest software or want something newer than what your Ubuntu APT repository offers, you can install directly from source. Note that opting for this installation method requires constant attention and maintenance if you want your version of the software to be up to date.
Option 3: Install Django Globally with pip. The option we are going with is pip 3 as we will be installing Django globally.
We’ll be installing Django using pip within a virtual environment. For further guidance and information on the setup and utilization of programming environments, check out this tutorial on setting up a virtual environment.
While in the server’s home directory, we have to create the directory that will contain our Django application. Run the following command to create a directory called
django-apps, or another name of your choice. Then navigate to the directory.
- mkdir django-apps
- cd django-apps
While inside the
django-apps directory, create your virtual environment. Let’s call it
- virtualenv env
Now, activate the virtual environment with the following command:
- . env/bin/activate
You’ll know it’s activated once the prefix is changed to
(env), which will look similar to the following depending on what directory you are in:
Within the environment, install the Django package using pip. Installing Django allows us to create and run Django applications. To learn more about Django, read our tutorial series on Django Development.
- pip install django
Once installed, verify your Django installation by running a version check:
- django-admin --version
This, or something similar, will be the resulting output:
With Django installed on your server, we can move on to creating a test project to make sure everything is working correctly.
To test the Django installation, we will be creating a skeleton web application.
First, if applicable, we’ll need to open the port we’ll be using in our server’s firewall. If you are using UFW (as detailed in the initial server setup guide), you can open the port with the following command:
- sudo ufw allow 8000
If you’re using DigitalOcean Firewalls, you can select
HTTP from the inbound rules. You can read more about DigitalOcean Firewalls and creating rules for them by reading the inbound rules section of the introductory tutorial.
We now can generate an application using
django-admin, a command line utility for administration tasks in Python. Then we can use the
startproject command to create the project directory structure for our test website.
While in the
django-apps directory, run the following command:
- django-admin startproject testsite
Note: Running the
django-admin startproject <projectname> command will name both project directory and project package the
<projectname> and create the project in the directory in which the command was run. If the optional
<destination> parameter is provided, Django will use the provided destination directory as the project directory, and create
manage.py and the project package within it.
Now we can look to see what project files were just created. Navigate to the
testsite directory then list the contents of that directory to see what files were created:
- cd testsite
You will notice output that shows this directory contains a file named
manage.py and a folder named
manage.py file is similar to
django-admin and puts the project’s package on
sys.path. This also sets the
DJANGO_SETTINGS_MODULE environment variable to point to your project’s
You can view the
manage.py script in your terminal by running the
less command like so:
- less manage.py
When you’re finished reading the script, press
q, to quit viewing the file.
Now navigate to the
testsite directory to view the other files that were created:
- cd testsite/
Then run the following command to list the contents of the directory:
You will see four files:
Output__init__.py settings.py urls.py wsgi.py
Let’s go over what each of these files are:
__init__.pyacts as the entry point for your Python project.
settings.pydescribes the configuration of your Django installation and lets Django know which settings are available.
urlpatternslist, that routes and maps URLs to their
wsgi.pycontains the configuration for the Web Server Gateway Interface. The Web Server Gateway Interface (WSGI) is the Python platform standard for the deployment of web servers and applications.
Note: Although a default file was generated, you still have the ability to tweak the
wsgi.py at any time to fit your deployment needs.
Now we can start the server and view the website on a designated host and port by running the
We’ll need to add your server ip address to the list of
ALLOWED_HOSTS in the
settings.py file located in
As stated in the Django docs, the
ALLOWED_HOSTS variable contains “a list of strings representing the host/domain names that this Django site can serve. This is a security measure to prevent HTTP Host header attacks, which are possible even under many seemingly-safe web server configurations.”
You can use your favorite text editor to add your ip address. For example, if you’re using
nano, just simply run the following command:
- nano ~/django-apps/testsite/testsite/settings.py
Once you run the command, you’ll want to navigate to the Allowed Hosts Section of the document and add your server’s IP address inside the square brackets within single or double quotes.
""" Django settings for testsite project. Generated by 'django-admin startproject' using Django 2.0. ... """ ... # SECURITY WARNING: don't run with debug turned on in production! DEBUG = True # Edit the line below with your server IP address ALLOWED_HOSTS = ['your-server-ip'] ...
You can save the change and exit nano by holding down the
x keys and then pressing the
With this completed, be sure to navigate back to the directory where
manage.py is located:
- cd ~/django-apps/testsite/
Now, run the following command replacing the your-server-ip text with the IP of your server:
- python manage.py runserver your-server-ip:8000
Finally, you can navigate to the below link to see what your skeleton website looks like, again replacing the highlighted text with your server’s actual IP:
Once the page loads, you’ll receive a webpage that is similar to the following:
This confirms that Django was properly installed and our test project is working correctly.
When you are done with testing your app, you can press
C to stop the
runserver command. This will return you to the your programming environment.
When you are ready to leave your Python environment, you can run the
Deactivating your programming environment will put you back to the terminal command prompt.
In this tutorial you have successfully upgraded to the latest version of Python 3 available to you via the Ubuntu APT repository. You’ve also installed pip 3,
You now have the tools needed to get started building Django web applications.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up
Click below to sign up and get $100 of credit to try our products over 60 days!