Tutorial

How To Install Node.js on Ubuntu 22.04

Published on April 28, 2022

Senior DevOps Technical Writer

How To Install Node.js on Ubuntu 22.04
Not using Ubuntu 22.04?Choose a different version or distribution.
Ubuntu 22.04

Introduction

Node.js is a JavaScript runtime for server-side programming. It allows developers to create scalable backend functionality using JavaScript, a language many are already familiar with from browser-based web development.

In this guide, we will show you three different ways of getting Node.js installed on an Ubuntu 22.04 server:

  • using apt to install the nodejs package from Ubuntu’s default software repository
  • using apt with an alternate PPA software repository to install specific versions of the nodejs package
  • installing nvm, the Node Version Manager, and using it to install and manage multiple versions of Node.js

For many users, using apt with the default repo will be sufficient. If you need specific newer (or legacy) versions of Node, you should use the PPA repository. If you are actively developing Node applications and need to switch between node versions frequently, choose the nvm method.

Simplify deploying Node applications with DigitalOcean App Platform. Deploy directly from GitHub in minutes.

Prerequisites

This guide assumes that you are using Ubuntu 22.04. Before you begin, you should have a non-root user account with sudo privileges set up on your system. You can learn how to do this by following the Ubuntu 22.04 initial server setup tutorial.

Option 1 — Installing Node.js with Apt from the Default Repositories

Ubuntu 22.04 contains a version of Node.js in its default repositories that can be used to provide a consistent experience across multiple systems. At the time of writing, the version in the repositories is 12.22.9. This will not be the latest version, but it should be stable and sufficient for quick experimentation with the language.

Warning: The version of Node.js included with Ubuntu 22.04, version 12.22.9, is an LTS, or “long-term support” release. It is technically outdated, but should be supported until the release of Ubuntu 24.04.

To get this version, you can use the apt package manager. Refresh your local package index first by typing:

  1. sudo apt update

Then install Node.js:

  1. sudo apt install nodejs

Press Y when prompted to confirm installation. If you are prompted to restart any services, press ENTER to accept the defaults and continue. Check that the install was successful by querying node for its version number:

  1. node -v
Output
v12.22.9

If the package in the repositories suits your needs, this is all you need to do to get set up with Node.js. In most cases, you’ll also want to install npm, the Node.js package manager. You can do this by installing the npm package with apt:

  1. sudo apt install npm

This will allow you to install modules and packages to use with Node.js.

At this point you have successfully installed Node.js and npm using apt and the default Ubuntu software repositories. The next section will show how to use an alternate repository to install different versions of Node.js.

Option 2 — Installing Node.js with Apt Using a NodeSource PPA

To install a different version of Node.js, you can use a PPA (personal package archive) maintained by NodeSource. These PPAs have more versions of Node.js available than the official Ubuntu repositories. Node.js v14, v16, and v18 are available as of the time of writing.

First, we will install the PPA in order to get access to its packages. From your home directory, use curl to retrieve the installation script for your preferred version, making sure to replace 18.x with your preferred version string (if different).

  1. cd ~
  2. curl -sL https://deb.nodesource.com/setup_18.x -o nodesource_setup.sh

Refer to the NodeSource documentation for more information on the available versions.

You can inspect the contents of the downloaded script with nano (or your preferred text editor):

  1. nano nodesource_setup.sh

Running third party shell scripts is not always considered a best practice, but in this case, NodeSource implements their own logic in order to ensure the correct commands are being passed to your package manager based on distro and version requirements. If you are satisfied that the script is safe to run, exit your editor, then run the script with sudo:

  1. sudo bash nodesource_setup.sh

The PPA will be added to your configuration and your local package cache will be updated automatically. You can now install the Node.js package in the same way you did in the previous section. It may be a good idea to fully remove your older Node.js packages before installing the new version, by using sudo apt remove nodejs npm. This will not affect your configurations at all, only the installed versions. Third party PPAs don’t always package their software in a way that works as a direct upgrade over stock packages, and if you have trouble, you can always try to revert to a clean slate.

  1. sudo apt install nodejs

Verify that you’ve installed the new version by running node with the -v version flag:

  1. node -v
Output
v18.7.0

The NodeSource nodejs package contains both the node binary and npm, so you don’t need to install npm separately.

At this point you have successfully installed Node.js and npm using apt and the NodeSource PPA. The next section will show how to use the Node Version Manager to install and manage multiple versions of Node.js.

Option 3 — Installing Node Using the Node Version Manager

Another way of installing Node.js that is particularly flexible is to use nvm, the Node Version Manager. This piece of software allows you to install and maintain many different independent versions of Node.js, and their associated Node packages, at the same time.

To install NVM on your Ubuntu 22.04 machine, visit the project’s GitHub page. Copy the curl command from the README file that displays on the main page. This will get you the most recent version of the installation script.

Before piping the command through to bash, it is always a good idea to audit the script to make sure it isn’t doing anything you don’t agree with. You can do that by removing the | bash segment at the end of the curl command:

  1. curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.1/install.sh

Take a look and make sure you are comfortable with the changes it is making. When you are satisfied, run the command again with | bash appended at the end. The URL you use will change depending on the latest version of nvm, but as of right now, the script can be downloaded and executed by typing:

  1. curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.1/install.sh | bash

This will install the nvm script to your user account. To use it, you must first source your .bashrc file:

  1. source ~/.bashrc

Now, you can ask NVM which versions of Node are available:

  1. nvm list-remote
Output
. . . v16.11.1 v16.12.0 v16.13.0 (LTS: Gallium) v16.13.1 (LTS: Gallium) v16.13.2 (LTS: Gallium) v16.14.0 (Latest LTS: Gallium) v17.0.0 v17.0.1 v17.1.0 v17.2.0 v17.3.0 v17.3.1 v17.4.0 v17.5.0 v17.6.0

It’s a very long list! You can install a version of Node by typing any of the release versions you see. For instance, to get version v16.14.0 (another LTS release), you can type:

  1. nvm install v16.14.0

You can see the different versions you have installed by typing:

nvm list
Output
-> v16.14.0 default -> v16.14.0 iojs -> N/A (default) unstable -> N/A (default) node -> stable (-> v16.14.0) (default) stable -> 16.14 (-> v16.14.0) (default) lts/* -> lts/gallium (-> v16.14.0) lts/argon -> v4.9.1 (-> N/A) lts/boron -> v6.17.1 (-> N/A) lts/carbon -> v8.17.0 (-> N/A) lts/dubnium -> v10.24.1 (-> N/A) lts/erbium -> v12.22.10 (-> N/A) lts/fermium -> v14.19.0 (-> N/A) lts/gallium -> v16.14.0

This shows the currently active version on the first line (-> v16.14.0), followed by some named aliases and the versions that those aliases point to.

Note: if you also have a version of Node.js installed through apt, you may see a system entry here. You can always activate the system-installed version of Node using nvm use system.

You can install a release based on these aliases as well. For instance, to install fermium, run the following:

  1. nvm install lts/fermium
Output
Downloading and installing node v14.19.0... Downloading https://nodejs.org/dist/v14.19.0/node-v14.19.0-linux-x64.tar.xz... ################################################################################# 100.0% Computing checksum with sha256sum Checksums matched! Now using node v14.19.0 (npm v6.14.16)

You can verify that the install was successful using the same technique from the other sections, by typing:

  1. node -v
Output
v14.19.0

The correct version of Node is installed on our machine as we expected. A compatible version of npm is also available.

Removing Node.js

You can uninstall Node.js using apt or nvm, depending on how it was installed. To remove the version from the system repositories, use apt remove:

  1. sudo apt remove nodejs

By default, apt remove retains any local configuration files that were created since install. If you don’t want to save the configuration files for later use, use apt purge:

  1. sudo apt purge nodejs

To uninstall a version of Node.js that you installed using nvm, first determine whether it is the current active version:

  1. nvm current

If the version you are targeting is not the current active version, you can run:

  1. nvm uninstall node_version
Output
Uninstalled node node_version

This command will uninstall the selected version of Node.js.

If the version you would like to remove is the current active version, you’ll first need to deactivate nvm to enable your changes:

  1. nvm deactivate

Now you can uninstall the current version using the uninstall command used previously. This removes all files associated with the targeted version of Node.js.

Conclusion

There are quite a few ways to get up and running with Node.js on your Ubuntu 22.04 server. Your circumstances will dictate which of the above methods is best for your needs. While using the packaged version in Ubuntu’s repository is the easiest method, using nvm or a NodeSource PPA offers additional flexibility.

For more information on programming with Node.js, please refer to our tutorial series How To Code in Node.js.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors
Default avatar

Senior DevOps Technical Writer

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
6 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Since nvm won’t install node environment to /usr/local/bin directory we must create symlinks in order to use node with services like GitHub Actions:

sudo ln -s "$NVM_DIR/versions/node/$(nvm version)/bin/node" "/usr/local/bin/node"
sudo ln -s "$NVM_DIR/versions/node/$(nvm version)/bin/npm" "/usr/local/bin/npm"

This guide provides detailed instructions for installing Node.js on an Ubuntu 22.04 server using three different methods. It starts with the basic method of using apt to install Node.js from the default repositories, suitable for most users who need a stable version. Then, it introduces the use of a NodeSource PPA to access more versions of Node.js, followed by an explanation of how to use nvm (Node Version Manager) for managing multiple Node.js versions.

When the install script in “Option 2 — Installing Node.js with Apt Using a NodeSource PPA” is run, it says it deprecated and will not longer work in the future. Latest version of Node.js is 20.

Using the install instructions from the Node.js GitHub (https://github.com/nodesource/distributions/blob/master/README.md) works.

Steps to install 20.x:

  $ sudo apt-get update -y
  $ sudo apt-get install -y ca-certificates curl gnupg
  $ sudo mkdir -p /etc/apt/keyrings
  $ curl -fsSL https://deb.nodesource.com/gpgkey/nodesource-repo.gpg.key | sudo gpg --dearmor -o /etc/apt/keyrings/nodesource.gpg
  $ NODE_MAJOR=20
  $ echo "deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_$NODE_MAJOR.x nodistro main" | sudo tee /etc/apt/sources.list.d/nodesource.list
  $ sudo apt-get update
  $ sudo apt-get install -y nodejs
  $ node -v
v20.6.1
  $ npm -v
9.8.1

I’m installing Ghost CMS and keep running into sudo: npm: command not found

Node installed fine under the normal user but Node is not available to root.

Is there something else that I’d need to do?

all the guides by digitalocean are great, THANKYOU, LOTS OF LOVE

Bonjour, avec nvm j’ai un Failed Failed to download ‘https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.1/bash_completion

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel