By Theo B
Webmin is a modern, web control panel for any Linux machine. It allows you to administer your server through an simple interface. With Webmin, you can change settings for common packages on the fly.
In this tutorial, you’ll install and configure Webmin on your server and secure access to the interface with a valid certificate using Let’s Encrypt. You’ll then use Webmin to add new user accounts, and update all packages on your server from the dashboard.
To complete this tutorial, you will need:
First, we need to add the Webmin repository so that we can easily install and update Webmin using our package manager. We do this by adding the repository to the
Open the file in your editor:
- sudo nano /etc/apt/sources.list
Then add this line to the bottom of the file to add the new repository:
. . . deb http://download.webmin.com/download/repository sarge contrib
Save the file and exit the editor.
Next, add the Webmin PGP key so that your system will trust the new repository:
wget http://www.webmin.com/jcameron-key.asc sudo apt-key add jcameron-key.asc
Next, update the list of packages to include the Webmin repository:
- sudo apt-get update
Then install Webmin:
- sudo apt-get install webmin
Once the installation finishes, you be presented with the following output:
OutputWebmin install complete. You can now login to https://your_server_ip:10000 as root with your root password, or as any user who can use `sudo`.
Please copy down this information, as you will need it for the next step.
Note: If you installed
ufw during the prerequisite step, you will need to run the command
sudo ufw allow 10000 in order to allow Webmin through the firewall. For extra security, you may want to configure your firewall to only allow access to this port from certain IP ranges.
Let’s secure access to Webmin by adding a valid certificate.
Webmin is already configured to use HTTPS, but it uses a self-signed, untrusted certificate. Let’s replace it with a valid certificate from Let’s Encrypt.
https://your_domain:10000 in your web browser, replacing
your_domain with the domain name you pointed at your server.
Note: When logging in for the first time, you will see an “Invalid SSL” error. This is because the server has generated a self-signed certificate. Allow the exception to continue so you can replace the self-signed certificate with one from Let’s Encrypt.
You’ll be presented with a login screen. Sign in with the non-root user you created while fulfilling the prerequisites for this tutorial.
Once you log in, the first screen you will see is the Webmin dashboard. Before you can apply a valid certificate, you have to set the server’s hostname. Look for the System hostname field and lick on the link to the right, as shown in the following figure:
This wil take you to the Hostname and DNS Client page. Locate the Hostname field, and enter your Fully-Qualified Domain Name into the field. Then press the Save button at the bottom of the page to apply the setting.
After you’ve set your hostname, click on Webmin on the left navigation bar, and then click on Webmin Configuration.
Then, select SSL Encryption from the list of icons, and then select the Let’s Encrypt tab. You’ll see a screen like the following figure:
Using this screen, you’ll tell Webmin how to obtain and renew your certificate. Let’s Encrypt certificates expire after 3 months, but we can instruct Webmin to automatically attempt to renew the Let’s Encrypt certificate every month. Let’s Encrypt looks for a verification file on our server, so we’ll configure Webmin to place the verification file inside the folder
/var/www/html, which is the folder that the Apache web server you configured in the prerequisites uses. Follow these steps to set up your certificate:
1into the input box, and selecting the radio button to the left of the input box.
To use the new certificate, restart Webmin by clicking the back arrow in your browser, and clicking the Restart Webmin button. Wait around 30 seconds, and then reload the page and log in again. Your browser should now indicate that the certificate is valid.
You’ve now set up a secured, working instance of Webmin. Let’s look at how to use it.
Webmin has many different modules that can control everything from the BIND DNS Server to something as simple as adding users to the system. Let’s look at how to create a new user, and then explore how to update the operating system using Webmin.
Let’s explore how to manage the users and groups on your server.
First, click the System tab, and then click the Users and Groups button. Then, from here, you can either add a user, manage a user, or add or manage a group.
Let’s create a new user called deploy which would be used for hosting web applications. To add a user, click Create a new user, which is located at the top of the users table. This displays the Create User screen, where you can supply the username, password, groups and other options. Follow these instructions to create the user:
When creating a user, you can set options for password expiry, the user’s shell, or whether they are allowed a home directory.
Next, let’s look at how to install updates to our system.
Webmin lets you update all of your packages through its user interface. To update all of your packages, first, go to the Dashboard link, and then locate the Package updates field. If there are updates available, you’ll see a link that states the number of available updates, as shown in the following figure:
Click this link, and then press Update selected packages to start the update. You may be asked to reboot the server, which you can also do through the Webmin interface.
You now have a secured, working instance of Webmin and you’ve used the interface to create a user and update packages. Webmin gives you access to many things you’d normally need to access through the console, and it organizes them in an intuitive way. For example, if you have Apache installed, you would find the configuration tab for it under Servers, and then Apache.
Explore the interface, or read the Official Webmin wiki to learn more about managing your system with Webmin.
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up now
This textbox defaults to using Markdown to format your answer.
You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!
For anyone else this may help, trying to get to the login page of Webmin is just plane terrible at times. You think it is allowed through the ufw but it is really your iptables. Spent just over a day with support troubleshooting, here’s the magic commands to get things working again.
iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT
If you are still blocked, make sure it’s open for ufw as well.
ufw allow 10000
Everything about Webmin links are outdated.
I’ve already setup and installed SSL with LetsEncrypt, following another DO tutorial. After installing and opening the port, it says: “Error : Document Follows : This web server is running in SSL mode.” What now? And note, I want to get this to get a graphical file manager. Pls advise if there is another way.
How to Disable SSL for Webmin Miniserv!
Step 1 ) sudo vim /etc/webmin/miniserv.conf Step 2 ) Locate the following line of code in the configuration file and change the “1“ value to “0.” ssl=1 Step 3) Restart the service webmin ---- /etc/init.d/webmin restart
“wget http://www.webmin.com/jcameron-key.asc” it doesn’t work because “gpg: can’t open `jcameron-key.asc’: No such file or directory”. The website is not responding. If I am skip this step, is there a problem with the installation?
I have a question about the login address that Let’s encrypt provides. When the installation is done, it gives the droplets name and not the IP address or domain name as set up during server setup.
i have 4 vhosts and I used numbers for this tutorials like 22.214.171.124 . I already had all 4 vhost domains got ssl from let’s encrypt. I am accessing the webmin from https://126.96.36.19900 and it shows non-secured connection. I had to add an exception to get to the home page. Any way we can get cert for this droplet ?
I tried to use Webmin’s Let’s Encrypt module and kept getting this error:
request failed : Failed to request certificate : my.domain challenge did not pass: Invalid response from http://my.domain/.well-known/acme-challenge/CCZqnto74VD0TQAekghFEbDzdr5t… 404 Not Found Not Found <p
After spending way too long trying to search Webmin’s documentation and even trying to review the prereqs for this tutorial, I ended up just following this very simple and fast guide from certbot via lets encrypt: [https://certbot.eff.org/lets-encrypt/ubuntuxenial-apache]
If you have ssh access for your droplet, I highly recommend this option over doing it through Webmin. However, webmin’s other features are super useful - that’s why I installed it.
In addition, in order for the SSL to be available on Webmin’s port (10000), I needed to change the SSL configurations. In Webmin > Webmin Configurations > SSL Encryption, in SSL Settings, change the private key and certification file paths accordingly:
I also selected yes to redirect non-SSL to SSL.
However, I’m still not able to use the SSL on the IP address. If anyone can point me in the direction of resolving this for me, that would be super helpful.
Does this install the SSL certificate only for port 10000 ? That’s how it works for me after following all these steps. So https://fqdn.com:10000 works but https://fqdn.com does not (the http version does).
A few more tips:
So, following this tutorial I got Webmin installed and was able to login, but there’s no options in it after that. The sidebar has a search bar and no links. The “dashboard” just has a list of recent logins, and the message “Warning! In order to have System Information displayed you will need to enable System Status module in user settings.” Googling it doesn’t seem to return anything useful, and all the other install tutorials I’ve seen seem to imply this “just works.”