Tutorial

How To Serve Flask Applications with Gunicorn and Nginx on Ubuntu 18.04

Updated on December 4, 2021
English
How To Serve Flask Applications with Gunicorn and Nginx on Ubuntu 18.04
Not using Ubuntu 18.04?Choose a different version or distribution.
Ubuntu 18.04

Introduction

In this guide, you will build a Python application using the Flask microframework on Ubuntu 18.04. The bulk of this article will be about how to set up the Gunicorn application server and how to launch the application and configure Nginx to act as a front-end reverse proxy.

Prerequisites

To complete this tutorial, you will need:

  • A server with Ubuntu 18.04 installed, a non-root user with sudo privileges, and a firewall enabled. Follow our initial server setup guide for guidance.

  • Nginx installed, following Steps 1 and 2 of How To Install Nginx on Ubuntu 18.04.

  • A domain name configured to point to your server. You can purchase one on Namecheap or get one for free on Freenom. You can learn how to point domains to DigitalOcean by following the relevant documentation on domains and DNS. Be sure to create the following DNS records:

    • An A record with your_domain pointing to your server’s public IP address.
    • An A record with www.your_domain pointing to your server’s public IP address.
  • Familiarity with the WSGI specification, which the Gunicorn server will use to communicate with your Flask application. This discussion covers WSGI in more detail.

Step 1 — Installing the Components from the Ubuntu Repositories

The first step is to install all of the necessary packages from the default Ubuntu repositories. This includes pip, the Python package manager, which will manage your Python components. You’ll also get the Python development files necessary to build some of the Gunicorn components.

First, update the local package:

  1. sudo apt update

Then install the packages that will allow you to build your Python environment. These include python3-pip, along with a few more packages and development tools necessary for a robust programming environment:

  1. sudo apt install python3-pip python3-dev build-essential libssl-dev libffi-dev python3-setuptools

With these packages in place, move on to creating a virtual environment for your project.

Step 2 — Creating a Python Virtual Environment

Next, set up a virtual environment to isolate your Flask application from the other Python files on the system.

Start by installing the python3-venv package, which will install the venv module:

  1. sudo apt install python3-venv

Next, make a parent directory for your Flask project:

  1. mkdir ~/myproject

Then change into the directory after you create it:

  1. cd ~/myproject

Create a virtual environment to store your Flask project’s Python requirements by entering the following:

  1. python3.6 -m venv myprojectenv

This will install a local copy of Python and pip into a directory called myprojectenv within your project directory.

Before installing applications within the virtual environment, you need to activate it by running the following:

  1. source myprojectenv/bin/activate

Your prompt will change to indicate that you are now operating within the virtual environment. It will read like the following:

(myprojectenv)\ssammy@host:~/myproject$

Step 3 — Setting Up a Flask Application

Now that you are in your virtual environment, you can install Flask and Gunicorn and get started on designing your application.

First, install wheel with the local instance of pip to ensure that your packages will install even if they are missing wheel archives:

  1. pip install wheel

Note: Regardless of which version of Python you are using, when the virtual environment is activated, you should use the pip command (not pip3).

Next, install Flask and Gunicorn:

  1. pip install gunicorn flask

Now that you have Flask available, you can create a basic application in the next step.

Creating a Sample Application

Since Flask is a microframework, it does not include many of the tools that more full-featured frameworks might. Flask mainly exists as a module that you can import into your projects to assist in initializing a web application.

While your application might be more complex, we’ll create our Flask application in a single file, called myproject.py. Create this file using your preferred text editor; here we’ll use nano:

  1. nano ~/myproject/myproject.py

The application code will live in this file. It will import Flask and instantiate a Flask object. You can use this to define the functions that should be run when a specific route is requested:

~/myproject/myproject.py
from flask import Flask
app = Flask(__name__)

@app.route("/")
def hello():
    return "<h1 style='color:blue'>Hello There!</h1>"

if __name__ == "__main__":
    app.run(host='0.0.0.0')

This defines what content to present when the root domain is accessed. Save and close the file when you’re finished. If you’re using nano, you can do this by pressing CTRL + X then Y and ENTER.

If you followed the initial server setup guide in the prerequisites, you should have a UFW firewall enabled. To test the application, first you need to allow access to port 5000:

  1. sudo ufw allow 5000

Then you can test your Flask application by running the following:

  1. python myproject.py

You will receive output like the following, including a helpful warning reminding you not to use this server setup in production:

Output
* Serving Flask app 'myproject' (lazy loading) * Environment: production WARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead. * Debug mode: off * Running on all addresses. WARNING: This is a development server. Do not use it in a production deployment. * Running on http://your_server_ip:5000/ (Press CTRL+C to quit)

Visit your server’s IP address followed by :5000 in your web browser:

http://your_server_ip:5000

You should receive something like the following:

Flask sample app

When you are finished, hit CTRL + C in your terminal window to stop the Flask development server.

Creating the WSGI Entry Point

Next, create a file that will serve as the entry point for your application. This will tell your Gunicorn server how to interact with the application.

Create a new file using your preferred text editor and name it. Here, we’ll call the file wsgi.py:

  1. nano ~/myproject/wsgi.py

In this file, import the Flask instance from your application and then run it:

~/myproject/wsgi.py
from myproject import app

if __name__ == "__main__":
    app.run()

Save and close the file when you are finished.

Step 4 — Configuring Gunicorn

Your application is now written with an entry point established and you can proceed to configuring Gunicorn.

But first, change into to the appropriate directory:

  1. cd ~/myproject

Next, you can check that Gunicorn can serve the application correctly by passing it the name of your entry point. This is constructed as the name of the module (minus the .py extension), plus the name of the callable within the application. In our case, this is written as wsgi:app.

You’ll also specify the interface and port to bind to so that the application will be started on a publicly available interface:

  1. gunicorn --bind 0.0.0.0:5000 wsgi:app

You will receive output like the following:

Output
[2021-11-19 23:07:57 +0000] [8760] [INFO] Starting gunicorn 20.1.0 [2021-11-19 23:07:57 +0000] [8760] [INFO] Listening at: http://0.0.0.0:5000 (8760) [2021-11-19 23:07:57 +0000] [8760] [INFO] Using worker: sync [2021-11-19 23:07:57 +0000] [8763] [INFO] Booting worker with pid: 8763 [2021-11-19 23:08:11 +0000] [8760] [INFO] Handling signal: int [2021-11-19 23:08:11 +0000] [8760] [INFO] Shutting down: Master

Visit your server’s IP address with :5000 appended to the end in your web browser again:

http://your_server_ip:5000

Your application’s output will generate the following:

Flask sample app

When you have confirmed that it’s functioning properly, press CTRL + C in your terminal window.

Since now you’re done with your virtual environment, deactivate it:

  1. deactivate

Any Python commands will now use the system’s Python environment again.

Next, create the systemd service unit file. Creating a systemd unit file will allow Ubuntu’s init system to automatically start Gunicorn and serve the Flask application whenever the server boots.

Create a unit file ending in .service within the /etc/systemd/system directory to begin:

  1. sudo nano /etc/systemd/system/myproject.service

Inside, start with the [Unit] section, which is used to specify metadata and dependencies. Add a description of your service here and tell the init system to only start this after the networking target has been reached:

/etc/systemd/system/myproject.service
[Unit]
Description=Gunicorn instance to serve myproject
After=network.target

Next, create a [Service] section. This will specify the user and group that you want the process to run under. Provide your regular user account ownership of the process since it owns all of the relevant files. Also, give group ownership to the www-data group so that Nginx can communicate with the Gunicorn processes. Remember to replace the username here with your username:

/etc/systemd/system/myproject.service
[Unit]
Description=Gunicorn instance to serve myproject
After=network.target

[Service]
User=sammy
Group=www-data

Next, map out the working directory and set the PATH environment variable so that the init system knows that the executables for the process are located within your virtual environment. Also, specify the command to start the service. This command will do the following:

  • Start 3 worker processes (though you should adjust this as necessary)
  • Create and bind to a Unix socket file, myproject.sock, within your project directory.
  • Set an umask value of 007 so that the socket file is created to give access to the owner and group, while restricting other access
  • Specify the WSGI entry point file name, along with the Python callable within that file (wsgi:app)

Systemd requires that you give the full path to the Gunicorn executable, which is installed within your virtual environment.

Remember to replace the username and project paths with your own information:

/etc/systemd/system/myproject.service
[Unit]
Description=Gunicorn instance to serve myproject
After=network.target

[Service]
User=sammy
Group=www-data
WorkingDirectory=/home/sammy/myproject
Environment="PATH=/home/sammy/myproject/myprojectenv/bin"
ExecStart=/home/sammy/myproject/myprojectenv/bin/gunicorn --workers 3 --bind unix:myproject.sock -m 007 wsgi:app

Finally, add an [Install] section. This will tell systemd what to link this service to if you enable it to start at boot. You want this service to start when the regular multi-user system is up and running:

/etc/systemd/system/myproject.service
[Unit]
Description=Gunicorn instance to serve myproject
After=network.target

[Service]
User=sammy
Group=www-data
WorkingDirectory=/home/sammy/myproject
Environment="PATH=/home/sammy/myproject/myprojectenv/bin"
ExecStart=/home/sammy/myproject/myprojectenv/bin/gunicorn --workers 3 --bind unix:myproject.sock -m 007 wsgi:app

[Install]
WantedBy=multi-user.target

With that, your systemd service file is complete. Save and close it now.

Now start the Gunicorn service you created:

  1. sudo systemctl start myproject

Then enable it so that it starts at boot:

  1. sudo systemctl enable myproject

Check the status:

  1. sudo systemctl status myproject

You should receive output like the following:

Output
● myproject.service - Gunicorn instance to serve myproject Loaded: loaded (/etc/systemd/system/myproject.service; enabled; vendor preset Active: active (running) since Fri 2021-11-19 23:08:44 UTC; 6s ago Main PID: 8770 (gunicorn) Tasks: 4 (limit: 1151) CGroup: /system.slice/myproject.service ├─9291 /home/sammy/myproject/myprojectenv/bin/python3.6 /home/sammy/myproject/myprojectenv/bin/gunicorn --workers 3 --bind unix:myproject.sock -m 007 wsgi:app ├─9309 /home/sammy/myproject/myprojectenv/bin/python3.6 /home/sammy/myproject/myprojectenv/bin/gunicorn --workers 3 --bind unix:myproject.sock -m 007 wsgi:app ├─9310 /home/sammy/myproject/myprojectenv/bin/python3.6 /home/sammy/myproject/myprojectenv/bin/gunicorn --workers 3 --bind unix:myproject.sock -m 007 wsgi:app └─9311 /home/sammy/myproject/myprojectenv/bin/python3.6 /home/sammy/myproject/myprojectenv/bin/gunicorn --workers 3 --bind unix:myproject.sock -m 007 wsgi:app …

If you receive any errors, be sure to resolve them before continuing with the tutorial.

Step 5 — Configuring Nginx to Proxy Requests

Your Gunicorn application server should now be up and running, waiting for requests on the socket file in the project directory. Next, configure Nginx to pass web requests to that socket by making some small additions to its configuration file.

Begin by creating a new server block configuration file in Nginx’s sites-available directory. We’ll call this myproject to stay consistent with the rest of the guide:

  1. sudo nano /etc/nginx/sites-available/myproject

Open up a server block and tell Nginx to listen on the default port 80. Also, tell it to use this block for requests for your server’s domain name:

/etc/nginx/sites-available/myproject
server {
    listen 80;
    server_name your_domain www.your_domain;
}

Next, add a location block that matches every request. Within this block, include the proxy_params file that specifies some general proxying parameters that need to be set. Then pass the requests to the socket you defined using the proxy_pass directive:

/etc/nginx/sites-available/myproject
server {
    listen 80;
    server_name your_domain www.your_domain;

    location / {
        include proxy_params;
        proxy_pass http://unix:/home/sammy/myproject/myproject.sock;
    }
}

Save and close the file when you’re finished.

To enable the Nginx server block configuration you’ve created, link the file to the sites-enabled directory. You can do this by running the ln command and the -s flag to create a symbolic or soft link, as opposed to a hard link:

  1. sudo ln -s /etc/nginx/sites-available/myproject /etc/nginx/sites-enabled

With the link in that directory, you can test for syntax errors:

  1. sudo nginx -t

If this returns without indicating any issues, restart the Nginx process to read the new configuration:

  1. sudo systemctl restart nginx

Finally, adjust the firewall again. Since you no longer need access through port 5000, remove that rule:

  1. sudo ufw delete allow 5000

Then allow full access to the Nginx server:

  1. sudo ufw allow 'Nginx Full'

You should now be able to navigate to your server’s domain name in your web browser:

http://your_domain

Your application’s output will appear in your browser:

Flask sample app

If you encounter any errors, try checking the following:

  • sudo less /var/log/nginx/error.log: checks the Nginx error logs.
  • sudo less /var/log/nginx/access.log: checks the Nginx access logs.
  • sudo journalctl -u nginx: checks the Nginx process logs.
  • sudo journalctl -u myproject: checks your Flask app’s Gunicorn logs.

Step 6 — Securing the Application

To ensure that traffic to your server remains secure, you should get an SSL certificate for your domain. There are multiple ways to do this, including getting a free certificate from Let’s Encrypt, generating a self-signed certificate, or buying one from another provider and configuring Nginx to use it by following Steps 2 through 6 of How to Create a Self-signed SSL Certificate for Nginx in Ubuntu 18.04. We will go with option one for the sake of expediency.

First, install Certbot using snap:

  1. sudo snap install --classic certbot

Your output will display the current version of Certbot and indicate a successful installation:

Output
certbot 1.21.0 from Certbot Project (certbot-eff✓) installed

Next, create a symbolic link to the newly installed /snap/bin/certbot executable from the /usr/bin/ directory. This will ensure that the certbot command can run correctly on your server:

  1. sudo ln -s /snap/bin/certbot /usr/bin/certbot

Certbot provides a variety of ways to obtain SSL certificates through plugins. The Nginx plugin will take care of reconfiguring Nginx and reloading the configuration whenever necessary. To use this plugin, type the following:

  1. sudo certbot --nginx -d your_domain -d www.your_domain

This runs certbot with the --nginx plugin, using -d to specify the names you’d like the certificate to be valid for.

If this is your first time running certbot, you will be prompted to enter an email address and agree to the terms of service. After doing so, certbot will communicate with the Let’s Encrypt server to request a certificate for your domain. If successful, you will receive the following output:

Output
Successfully received certificate. Certificate is saved at: /etc/letsencrypt/live/jeanellehorcasitasphd.com/fullchain.pem Key is saved at: /etc/letsencrypt/live/jeanellehorcasitasphd.com/privkey.pem This certificate expires on 2022-03-03. These files will be updated when the certificate renews. Certbot has set up a scheduled task to automatically renew this certificate in the background. Deploying certificate Successfully deployed certificate foryour_domain to /etc/nginx/sites-enabled/myproject Successfully deployed certificate for your_domain to /etc/nginx/sites-enabled/myproject Congratulations! You have successfully enabled HTTPS on https://your_domain and https://your_domain - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - If you like Certbot, please consider supporting our work by: * Donating to ISRG / Let's Encrypt: https://letsencrypt.org/donate * Donating to EFF: https://eff.org/donate-le

If you followed the Nginx installation instructions in the prerequisites, you will no longer need the redundant HTTP profile allowance:

  1. sudo ufw delete allow 'Nginx HTTP'

To verify the configuration, navigate once again to your domain, using https://:

https://your_domain

You should receive your application output once again, along with your browser’s security indicator, which should indicate that the site is secured.

Conclusion

In this guide, you created and secured a basic Flask application within a Python virtual environment. You created a WSGI entry point so that any WSGI-capable application server can interface with it, and then configured the Gunicorn application server to provide this function. Afterward, you created a systemd service file to automatically launch the application server on boot. You also created an Nginx server block that passes web client traffic to the application server for relaying external requests and secured traffic to your server with Let’s Encrypt.

Flask is an extremely flexible framework meant to provide your applications with functionality without being too restrictive about structure and design. You can use the general stack described in this guide to serve the flask applications that you design.

Get Ubuntu on a hosted virtual machine in seconds with DigitalOcean Droplets! Simple enough for any user, powerful enough for fast-growing applications or businesses.

Learn more here

About the authors


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

There´s some important notes here, that should be added to the tutorial, while many will struggle with this. Look at the provided answer here: https://stackoverflow.com/questions/39919053/django-gunicorn-sock-file-not-created-by-wsgi#_=_

Hi Justin/Kathleen,

Not sure if you read these comments.

Just wanted to say these tutorials are fantastic! I’m so glad you guys took the time to make these.

Just wanted to give a heads up for someone who is getting the ‘Bad Gateway’ error. When editing the /etc/nginx/sites-available/appname file on the line

proxy_pass http://unix:/home/sammy/myproject/myproject.sock;

I had a capital letter for the ‘Myproject.sock’ file and when the file was created it was created without a capital letter. Changing the ‘Myproject.sock’ to ‘myproject.sock’ with all lowercase fixed this issue. I had assumed it would create the sock file with an uppercase but that did not happen.

Hi folks, I set everything up just fine but once I make a changes to my files, I can’t seem to figure out how out to force refresh my Flask app. Anyone able to help?

This tutorial is awesome! got my webapp set up following this tutorial. Thanks for sharing.

This tutorial could be a bit better. For example there’s no automation. No explanation of what’s in proxy_params. I made a comment about removing it because I had added in redundant proxy headers.

“Within this block, include the proxy_params file that specifies some general proxying parameters that need to be set.” NO, DO NOT USE include proxy_params. It breaks redirects in production Also, make sure to include the forward proxy headers. See https://docs.gunicorn.org/en/stable/deploy.html#id5 for more configurations. I also had to add proxy_headers_hash_max_size 512 and proxy_headers_hash_bucket_size 128

Lastly, this tutorial lacks some serious automation. I have created a complete automation script for deployment. I suggest everyone do the same. It’s very long. In a couple years, I’ll build a desktop app for auto-deployment that won’t require all this manual command line typing.

Amazing ! Everything works flawlessly and the educational content in super nice!

Hi, Everything works perfectly till I reach the final step where when I hit the website URL, the nginx server block success page shows up (last step from https://www.digitalocean.com/community/tutorials/how-to-install-nginx-on-ubuntu-18-04#step-2-–-adjusting-the-firewall) when I was expecting the flask application.

However, when I hit IP_address:5000 the flask application appeared after “gunicorn --bind 0.0.0.0:5000 wsgi:app” step.

Can you create a Flask, Gunicorn, Envoy Proxy tutorial since Envoy is better than Nginx?

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more