Tutorial

Migrate Your Current VPS (Linode, Rackspace, AWS EC2) to DigitalOcean

Published on July 11, 2013
Migrate Your Current VPS (Linode, Rackspace, AWS EC2) to DigitalOcean

Introduction

Migrating between VPS providers can seem like a daunting task. Like DigitalOcean, other VPS providers, such as Linode and Rackspace, provide root access. This allows you to transfer all of the necessary files to your new DigitalOcean VPS.

For this guide, we will demonstrate how to transfer a simple WordPress blog from Linode to a DigitalOcean cloud server.

WordPress Blog on Linode Server

Both instances will be running Ubuntu. These instructions can be adapted to migrate other services from other providers.

We will be working as root in both VPS instances.

What the Red Means

The lines that the user needs to enter or customize will be in red in this tutorial! The rest should mostly be copy-and-pastable.

Preliminary DigitalOcean Cloud Server Configuration

LAMP Installation

To begin, you will want to install a LAMP (Linux, Apache, MySQL, PHP) stack on your DigitalOcean cloud server. This can be accomplished in a few different ways.

The easiest way to get LAMP up and running on Ubuntu is to choose the pre-configured "LAMP on Ubuntu" image when you are initially creating your droplet. In the "Select Image" portion of the Droplet creation page, choose the "Applications" tab. Select "LAMP on Ubuntu 14.04".

LAMP on Ubuntu image for DigitalOcean VPS

If you already have a droplet that you would like to use, you can install a LAMP stack on Ubuntu by following this link.

Rsync Installation

We will be doing our file transfers using ssh and rsync. Make sure rsync is installed on your DigitalOcean VPS using the following command:

rsync --version

If this command returns a "command not found" message, then you need to install rsync with apt-get:

apt-get install rsync

Communicating Between VPS Servers

The following steps will take place on your old VPS. If you aren't already, log in as root.

Your old VPS also needs to have rsync installed. Re-run the check for rsync on this system:

rsync --version

If necessary, install rsync:

apt-get install rsync

In order to transfer the relevant information from our previous VPS to our DigitalOcean cloud server, rsync needs to be able to log into our new server from our old server. We will be using SSH to do this.

If you do not have SSH keys generated on your old VPS, create them now with the following command:

ssh-keygen -t rsa -b 4096 -v

Answer the prompts as required. Feel free to press "Enter" through all of the prompts to accept the default values.

Next, transfer the SSH key to our new VPS using the following command. Change the portion in red to reflect your DigitalOcean VPS IP address:

ssh-copy-id 111.222.333.444

Transferring Site Files

First, we will be transferring the files in our old server's web root to our new cloud server. We will find where our WordPress web root is by examining the configuration file. We will look at the sites-enabled directory to find the correct VirtualHost file:

cd /etc/apache2/sites-enabled
ls
li606-185.members.linode.com

Here, our file is called "li606-185.members.linode.com", but yours may be something different. Open the file in nano:

nano li606-185.members.linode.com

We are looking for the "DocumentRoot" line to tell us which directory our web content is being served from. In our example, the line reads:

DocumentRoot /srv/www/li606-185.members.linode.com/public_html/

Close the file and cd into that directory:

cd /srv/www/li606-185.members.linode.com/public_html/
ls -F
Output
latest.tar.gz  wordpress/

As you can see, we have a directory for our WordPress site. This contains all of the web content for our site.

We will transfer this entire directory, along with its permissions and sub-directories, from this location into the web root of our DigitalOcean cloud server. By default, apache2 on Ubuntu 14.04 serves its content out of "/var/www/html", so that is where we will place this content.

We will add some options to rsync in order for it to transfer properly. The "-a" option stands for archive, which allows us to transfer recursively while preserving many of the underlying file properties like permissions and ownership.

We also use the "-v" flag for verbose output, and the "-P" flag, which shows us transfer progress and allows rsync to resume in the event of a transfer problem.

rsync -avP wordpress 111.222.333.444:/var/www/html/

Note how there is no trailing slash after "wordpress", but that there is in "/var/www/html/". This will transfer the "wordpress" directory itself to the destination instead of only transferring the directory contents.

Our entire WordPress directory structure has now been transferred to the web root of the new cloud server.

At this point, if we direct our web browser to our new cloud server's IP address and try to access our WordPress site, we will get a MySQL error:

111.222.333.444/wordpress
Error establishing a database connection
MySQL Error establishing a database connection

This is because WordPress stores its data in a MySQL database that has not been transferred yet. We will handle the MySQL transfer next.

MySQL Database Transfer

The best way to transfer MySQL databases is to use MySQL's internal database dumping utility. First, we will see what databases we need to dump. Log into MySQL:

cd
mysql -u root -p

Enter the database administrator's password to continue. List the MySQL databases with the following command:

show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| wordpress          |
+--------------------+
3 rows in set (0.00 sec)

We would like to transfer our "wordpress" database, which contains our site information, and also our "mysql" database, which will transfer all of our user info, etc. The "information_schema" is just data structure information, and we don't need to hold onto that.

Get an idea of which databases you want to transfer for the next step. Exit out of MySql:

exit

We will be dumping the database information with "mysqldump" and then compressing it with "bzip2". We will use a number of parameters to make our databases import cleanly. Replace the red with your database names:

mysqldump -u root -p -QqeR --add-drop-table --databases mysql wordpress | bzip2 -v9 - > siteData.sql.bz2

Again, enter your database administrator's password to continue.

We now have a zipped database file that we can transfer to our new cloud server. We will use rsync again. Change the IP address to reflect your DigitalOcean server's IP address:

rsync -avP siteData.sql.bz2 111.222.333.444:/root

Importing the Databases

Our database file is compressed and transferred to our new DigitalOcean cloud server. We must import it into MySQL on our new server so that WordPress can utilize it.

Log into your DigitalOcean cloud server as root for the following steps.

Our database file was transferred to the root user's home directory, so move to that directory now. We will uncompress the file using "bunzip2":

cd /root
bunzip2 siteData.sql.bz2

Now we can import the file into our new MySQL database:

mysql -u root -p < siteData.sql

Let's check to see that MySQL has imported correctly:

mysql -u root -p
show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
| test               |
| wordpress          |
+--------------------+
5 rows in set (0.00 sec)

As you can see, our "wordpress" database is present. The previous "mysql" database has been replaced with the one from our old VPS.

Exit out of MySQL:

exit

Now we will restart our database and our server for good measure:

service mysql restart
service apache2 restart

Now, if we navigate to our DigitalOcean VPS IP address followed by "/wordpress", we will see the WordPress site that was previously hosted on our old VPS:

111.222.333.444/wordpress
WordPress Blog migrated to DigitalOcean VPS

Final Considerations

Before changing over your domain name to point to your new site location, it is important to test your setup extensively.

It is a good idea to reference the services that were running on your old VPS, and then check their configuration files. You can see the services that were running on your old VPS by logging in and typing:

netstat -plunt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.0.1:3306          0.0.0.0:*               LISTEN      13791/mysqld    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      10538/sshd      
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      13963/master    
tcp6       0      0 :::80                   :::*                    LISTEN      13771/apache2   
tcp6       0      0 :::22                   :::*                    LISTEN      10538/sshd      
udp        0      0 0.0.0.0:68              0.0.0.0:*                           2287/dhclient3  

Here, we can see the services in the last column that we will want to configure on our new server. Your list will probably be different.

Each service has its own configuration syntax and configuration location, so you will need to check the documentation on a case-by-case basis.

As an example, if we wanted to replicate the configuration of our SSH daemon on our new VPS we could transfer the configuration file to the home directory of our new VPS using rsync:

rsync -avP /etc/ssh/sshd_config 111.222.333.444:/root

After we've transferred the file, we do not want to simply replace the default file with the one from our old VPS.

Different versions of programs can introduce changes to the syntax. Issues can also arise from configuration options that were specific to your old VPS. Options referencing hostnames, IP addresses, or file paths will need to be changed to reflect your new setup.

It is safer to produce a diff of the files so that you can adjust your new cloud server's native configuration file as necessary.

There are a number of different programs that can give you the differences between two files. One is simply diff:

diff /root/sshd_conf /etc/ssh/sshd_config

This will produce a list of all of the differences between the two files. You can examine the differences and take them into consideration. Some configuration options you might want to incorporate from your old setup, while others you might want to modify or discard.

By Justin Ellingwood

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

This is totally misleading title. Maybe “Migrate Your Current LAMP Data” (Linode, Rackspace, AWS EC2) to DigitalOcean

We are looking to migrate an entire server with cpanel, WHM and multiple hosting accounts. This is simply doing a website transfer.

How can I migrate from F(x) Data Cloud ?

Thanks, this is helpful.
However are you aware of a similar tutorial for scripting an import to DigitalOcean’s DNS (preferably from an export of DNS entries at Linode)

Hi Kamaln7 thanks for the help.

One more question, I am currently using nginx on linode and want to use Apache on Digitalocean , so Can I use same procedure or do I need to anything else?

After entering latest.tar.gz wordpress/ I get latest.tar.gz: command not found error. Any help?

For UTF8 encoded DB, which is the default case for WordPress DB now a days, it’s highly recommneded to do the backup as follow:

mysqldump -u root -p --default-character-set=utf8 -QqeR --add-drop-table --databases mysql wordpress | bzip2 -v9 - > siteData.sql.bz2

For UTF8 encoded DB, which is the default case for WordPress DB now a days, it’s highly recommneded to do the backup as follow:

mysqldump -u root -p --default-character-set=utf8 -QqeR --add-drop-table --databases mysql wordpress | bzip2 -v9 - > siteData.sql.bz2

No, I did not disable root login…

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
December 5, 2013

@nankai.mar: Did you disable root login on your droplet?

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more