Tutorial

Understanding Dictionaries in Python 3

Updated on August 20, 2021
Understanding Dictionaries in Python 3

Introduction

The dictionary is Python’s built-in mapping type. Dictionaries map keys to values and these key-value pairs provide a useful way to store data in Python.

Typically used to hold data that are related, such as the information contained in an ID or a user profile, dictionaries are constructed with curly braces on either side { }.

Info: To follow along with the example code in this tutorial, open a Python interactive shell on your local system by running the python3 command. Then you can copy, paste, or edit the examples by adding them after the >>> prompt.

A dictionary looks like this:

sammy = {'username': 'sammy-shark', 'online': True, 'followers': 987}

In addition to the curly braces, there are also colons (:) throughout the dictionary.

The words to the left of the colons are the keys. Keys can be made up of any immutable data type. The keys in the dictionary above are:

  • 'username'
  • 'online'
  • 'followers'

Each of the keys in the above example are string values.

The words to the right of the colons are the values. Values can be comprised of any data type. The values in the dictionary above are:

  • 'sammy-shark'
  • True
  • 987

Each of these values is either a string, Boolean, or integer.

Let’s print out the dictionary sammy:

print(sammy)
Output
{'username': 'sammy-shark', 'followers': 987, 'online': True}

Looking at the output, the order of the key-value pairs may have shifted. In Python version 3.5 and earlier, the dictionary data type is unordered. However, in Python version 3.6 and later, the dictionary data type remains ordered. Regardless of whether the dictionary is ordered or not, the key-value pairs will remain intact, enabling us to access data based on their relational meaning.

Prerequisites

You should have Python 3 installed and a programming environment set up on your computer or server. If you don’t have a programming environment set up, you can refer to the installation and setup guides for a local programming environment or for a programming environment on your server appropriate for your operating system (Ubuntu, CentOS, Debian, etc.)

Accessing Dictionary Elements

We can call the values of a dictionary by referencing the related keys.

Accessing Data Items with Keys

Because dictionaries offer key-value pairs for storing data, they can be important elements in your Python program.

If we want to isolate Sammy’s username, we can do so by calling sammy['username']. Let’s print that out:

print(sammy['username'])
Output
sammy-shark

Dictionaries behave like a database in that instead of calling an integer to get a particular index value as you would with a list, you assign a value to a key and can call that key to get its related value.

By invoking the key 'username' we receive the value of that key, which is 'sammy-shark'.

The remaining values in the sammy dictionary can similarly be called using the same format:

sammy['followers']
# Returns 987

sammy['online']
# Returns True

By making use of dictionaries’ key-value pairs, we can reference keys to retrieve values.

Using Methods to Access Elements

In addition to using keys to access values, we can also work with some built-in methods:

  • dict.keys() isolates keys
  • dict.values() isolates values
  • dict.items() returns items in a list format of (key, value) tuple pairs

To return the keys, we would use the dict.keys() method. In our example, that would use the variable name and be sammy.keys(). Let’s pass that to a print() method and look at the output:

print(sammy.keys())
Output
dict_keys(['followers', 'username', 'online'])

We receive output that places the keys within an iterable view object of the dict_keys class. The keys are then printed within a list format.

This method can be used to query across dictionaries. For example, we can take a look at the common keys shared between two dictionary data structures:

sammy = {'username': 'sammy-shark', 'online': True, 'followers': 987}
jesse = {'username': 'JOctopus', 'online': False, 'points': 723}

for common_key in sammy.keys() & jesse.keys():
    print(sammy[common_key], jesse[common_key])

The dictionary sammy and the dictionary jesse are each a user profile dictionary.

Their profiles have different keys, however, because Sammy has a social profile with associated followers, and Jesse has a gaming profile with associated points. The 2 keys they have in common are username and online status, which we can find when we run this small program:

Output
sammy-shark JOctopus True False

We could certainly improve on the program to make the output more user-readable, but this illustrates that dict.keys() can be used to check across various dictionaries to see what they share in common or not. This is especially useful for large dictionaries.

Similarly, we can use the dict.values() method to query the values in the sammy dictionary, which would be constructed as sammy.values(). Let’s print those out:

sammy = {'username': 'sammy-shark', 'online': True, 'followers': 987}

print(sammy.values())
Output
dict_values([True, 'sammy-shark', 987])

Both the methods keys() and values() return unsorted lists of the keys and values present in the sammy dictionary with the view objects of dict_keys and dict_values respectively.

If we are interested in all of the items in a dictionary, we can access them with the items() method:

print(sammy.items())
Output
dict_items([('online', True), ('username', 'sammy-shark'), ('followers', 987)])

The returned format of this is a list made up of (key, value) tuple pairs with the dict_items view object.

We can iterate over the returned list format with a for loop. For example, we can print out each of the keys and values of a given dictionary, and then make it more human-readable by adding a string:

for key, value in sammy.items():
    print(key, 'is the key for the value', value)
Output
online is the key for the value True followers is the key for the value 987 username is the key for the value sammy-shark

The for loop above iterated over the items within the sammy dictionary and printed out the keys and values line by line, with information to make it easier to understand by humans.

We can use built-in methods to access items, values, and keys from dictionary data structures.

Modifying Dictionaries

Dictionaries are a mutable data structure, so you are able to modify them. In this section, we’ll go over adding and deleting dictionary elements.

Adding and Changing Dictionary Elements

Without using a method or function, you can add key-value pairs to dictionaries by using the following syntax:

dict[key] = value

We’ll look at how this works in practice by adding a key-value pair to a dictionary called usernames:

usernames = {'Sammy': 'sammy-shark', 'Jamie': 'mantisshrimp54'}

usernames['Drew'] = 'squidly'

print(usernames)
Output
{'Drew': 'squidly', 'Sammy': 'sammy-shark', 'Jamie': 'mantisshrimp54'}

We see now that the dictionary has been updated with the 'Drew': 'squidly' key-value pair. Because dictionaries may be unordered, this pair may occur anywhere in the dictionary output. If we use the usernames dictionary later in our program file, it will include the additional key-value pair.

Additionally, this syntax can be used for modifying the value assigned to a key. In this case, we’ll reference an existing key and pass a different value to it.

Let’s consider a dictionary drew that is one of the users on a given network. We’ll say that this user got a bump in followers today, so we need to update the integer value passed to the 'followers' key. We’ll use the print() function to check that the dictionary was modified.

drew = {'username': 'squidly', 'online': True, 'followers': 305}

drew['followers'] = 342

print(drew)
Output
{'username': 'squidly', 'followers': 342, 'online': True}

In the output, we see that the number of followers jumped from the integer value of 305 to 342.

We can use this method for adding key-value pairs to dictionaries with user-input. Let’s write a quick program, usernames.py that runs on the command line and allows input from the user to add more names and associated usernames:

usernames.py
# Define original dictionary
usernames = {'Sammy': 'sammy-shark', 'Jamie': 'mantisshrimp54'}

# Set up while loop to iterate
while True:

    # Request user to enter a name
    print('Enter a name:')

    # Assign to name variable
    name = input()

    # Check whether name is in the dictionary and print feedback
    if name in usernames:
        print(usernames[name] + ' is the username of ' + name)

    # If the name is not in the dictionary...
    else:

        # Provide feedback        
        print('I don\'t have ' + name + '\'s username, what is it?')

        # Take in a new username for the associated name
        username = input()

        # Assign username value to name key
        usernames[name] = username

        # Print feedback that the data was updated
        print('Data updated.')

Let’s run the program on the command line:

  1. python usernames.py

When we run the program we’ll get something like the following output:

Output
Enter a name: Sammy sammy-shark is the username of Sammy Enter a name: Jesse I don't have Jesse's username, what is it? JOctopus Data updated. Enter a name:

When we are done testing the program, we can press CTRL + C to escape the program. You can set up a trigger to quit the program (such as typing the letter q) with a conditional statement to improve the code.

This shows how you can modify dictionaries interactively. With this particular program, as soon as you exit the program with CTRL + C you’ll lose all your data unless you implement a way to handle reading and writing files.

We can also add and modify dictionaries by using the dict.update() method. This varies from the append() method available in lists.

In the jesse dictionary below, let’s add the key 'followers' and give it an integer value with jesse.update(). Following that, let’s print() the updated dictionary.

jesse = {'username': 'JOctopus', 'online': False, 'points': 723}

jesse.update({'followers': 481})

print(jesse)
Output
{'followers': 481, 'username': 'JOctopus', 'points': 723, 'online': False}

From the output, we can see that we successfully added the 'followers': 481 key-value pair to the dictionary jesse.

We can also use the dict.update() method to modify an existing key-value pair by replacing a given value for a specific key.

Let’s change the online status of Sammy from True to False in the sammy dictionary:

sammy = {'username': 'sammy-shark', 'online': True, 'followers': 987}

sammy.update({'online': False})

print(sammy)
Output
{'username': 'sammy-shark', 'followers': 987, 'online': False}

The line sammy.update({'online': False}) references the existing key 'online' and modifies its Boolean value from True to False. When we call to print() the dictionary, we see the update take place in the output.

To add items to dictionaries or modify values, we can use either the dict[key] = value syntax or the method dict.update().

Deleting Dictionary Elements

Just as you can add key-value pairs and change values within the dictionary data type, you can also delete items within a dictionary.

To remove a key-value pair from a dictionary, we’ll use the following syntax:

del dict[key]

Let’s take the jesse dictionary that represents one of the users. We’ll say that Jesse is no longer using the online platform for playing games, so we’ll remove the item associated with the 'points' key. Then, we’ll print the dictionary out to confirm that the item was deleted:

jesse = {'username': 'JOctopus', 'online': False, 'points': 723, 'followers': 481}

del jesse['points']

print(jesse)
Output
{'online': False, 'username': 'JOctopus', 'followers': 481}

The line del jesse['points'] removes the key-value pair 'points': 723 from the jesse dictionary.

If we would like to clear a dictionary of all of its values, we can do so with the dict.clear() method. This will keep a given dictionary in case we need to use it later in the program, but it will no longer contain any items.

Let’s remove all the items within the jesse dictionary:

jesse = {'username': 'JOctopus', 'online': False, 'points': 723, 'followers': 481}

jesse.clear()

print(jesse)
Output
{}

The output shows that we now have an empty dictionary devoid of key-value pairs.

If we no longer need a specific dictionary, we can use del to get rid of it entirely:

del jesse

print(jesse)

When we run a call to print() after deleting the jesse dictionary, we’ll receive the following error:

Output
... NameError: name 'jesse' is not defined

Because dictionaries are mutable data types, they can be added to, modified, and have items removed and cleared.

Conclusion

This tutorial went through the dictionary data structure in Python. Dictionaries are made up of key-value pairs and provide a way to store data without relying on indexing. This allows us to retrieve values based on their meaning and relation to other data types.

From here, you can learn more about other data types in our “Understanding Data Types” tutorial.

You can see the dictionary data type used in programming projects such as web scraping with Scrapy.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products


Tutorial Series: How To Code in Python

Python is a flexible and versatile programming language that can be leveraged for many use cases, with strengths in scripting, automation, data analysis, machine learning, and back-end development. It is a great tool for both new learners and experienced developers alike.

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
3 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

very nice thank you

This professional hacker is absolutely reliable and I strongly recommend him for any type of hack you require. I know this because I have hired him severally for various hacks and he has never disappointed me nor any of my friends who have hired him too, he can help you with any of the following hacks:

-Phone hacks (remotely) -Credit repair -Bitcoin recovery (any cryptocurrency) -Make money from home (USA only) -Social media hacks -Website hacks -Erase criminal records (USA & Canada only) -Grade change -funds recovery

Email: onlineghosthacker247@ gmail .com

thanks a lot

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel