Scale up as you grow — whether you're running one virtual machine or ten thousand.

From GPU-powered inference and Kubernetes to managed databases and storage, get everything you need to build, scale, and deploy intelligent applications.

By Pavel Dostál
Hello everyone,
I have dual stack OpenVPN server:
IPv4 works fine, but IPv6 works only in local network. I would like to access the IPv6 Internet through my VPN.
Server eth0 IP: 2a03:b0c0:1:d0::7f:8001/64 Server tun0 IP: 2a03:b0c0:1:d0::7f:8002/64 Client tun0 IP: 2a03:b0c0:1:d0::7f:8003/64
Chain INPUT (policy DROP 240 packets, 19200 bytes)
pkts bytes target prot opt in out source destination
32 6574 ACCEPT all lo * ::/0 ::/0
167 14920 ACCEPT icmpv6 * * ::/0 ::/0
36 3242 ACCEPT udp * * ::/0 ::/0 udp dpt:53
6 481 ACCEPT tcp * * ::/0 ::/0 tcp dpt:53
0 0 ACCEPT tcp * * ::/0 ::/0 tcp dpt:22
0 0 ACCEPT tcp * * ::/0 ::/0 tcp dpt:1194
246 28608 ACCEPT all * * ::/0 ::/0 state RELATED,ESTABLISHED
Chain FORWARD (policy ACCEPT 15 packets, 1560 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 569 packets, 91798 bytes)
pkts bytes target prot opt in out source destination
mode server
tls-server
proto tcp-server
dev tun0
tun-ipv6
topology subnet
client-to-client
ifconfig 192.168.192.1 255.255.255.0
ifconfig-ipv6 2a03:b0c0:1:d0::7f:8002 2a03:b0c0:1:d0::7f:8001
client-config-dir /etc/openvpn/ccd
ifconfig-push 192.168.192.3 255.255.255.0 # vps
ifconfig-ipv6-push 2a03:b0c0:1:d0::7f:8003/64
push "route-ipv6 2a03:b0c0:1:d0::7f:8001/64"
push "route-ipv6 2000::/3"
net.ipv6.conf.all.forwarding=1
remote shark.pdostal.cz 1194
proto tcp
tls-client
dev tun1
tun-ipv6
proto tcp-client
remote-cert-tls server
pull
<certificates>
keepalive 10 30
comp-lzo
persist-key
persist-tun
verb 2
Do you have any idea what is wrong? Thanks you for your help!