How to Install and Use Docker on Ubuntu 18.04
How to Install and Use Docker on Ubuntu 18.04
We hope you find this tutorial helpful. In addition to guides like this one, we provide simple cloud infrastructure for developers. Learn more →

How to Install and Use Docker on Ubuntu 18.04

PostedJuly 5, 2018 86.9k views Docker Ubuntu 18.04

A previous version of this tutorial was written by finid.

Introduction

Docker is an application that simplifies the process of managing application processes in containers. Containers let you run your applications in resource-isolated processes. They're similar to virtual machines, but containers are more portable, more resource-friendly, and more dependent on the host operating system.

For a detailed introduction to the different components of a Docker container, check out The Docker Ecosystem: An Introduction to Common Components.

In this tutorial, you'll install and use Docker Community Edition (CE) on Ubuntu 18.04. You'll install Docker itself, work with containers and images, and push an image to a Docker Repository.

Prerequisites

To follow this tutorial, you will need the following:

Step 1 — Installing Docker

The Docker installation package available in the official Ubuntu repository may not be the latest version. To ensure we get the latest version, we'll install Docker from the official Docker repository. To do that, we'll add a new package source, add the GPG key from Docker to ensure the downloads are valid, and then install the package.

First, update your existing list of packages:

  • sudo apt update

Next, install a few prerequisite packages which let apt use packages over HTTPS:

  • sudo apt install apt-transport-https ca-certificates curl software-properties-common

Then add the GPG key for the official Docker repository to your system:

  • curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -

Add the Docker repository to APT sources:

  • sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu bionic stable"

Next, update the package database with the Docker packages from the newly added repo:

  • sudo apt update

Make sure you are about to install from the Docker repo instead of the default Ubuntu repo:

  • apt-cache policy docker-ce

You'll see output like this, although the version number for Docker may be different:

Output of apt-cache policy docker-ce
docker-ce:
  Installed: (none)
  Candidate: 18.03.1~ce~3-0~ubuntu
  Version table:
     18.03.1~ce~3-0~ubuntu 500
        500 https://download.docker.com/linux/ubuntu bionic/stable amd64 Packages

Notice that docker-ce is not installed, but the candidate for installation is from the Docker repository for Ubuntu 18.04 (bionic).

Finally, install Docker:

  • sudo apt install docker-ce

Docker should now be installed, the daemon started, and the process enabled to start on boot. Check that it's running:

  • sudo systemctl status docker

The output should be similar to the following, showing that the service is active and running:

Output
● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2018-07-05 15:08:39 UTC; 2min 55s ago Docs: https://docs.docker.com Main PID: 10096 (dockerd) Tasks: 16 CGroup: /system.slice/docker.service ├─10096 /usr/bin/dockerd -H fd:// └─10113 docker-containerd --config /var/run/docker/containerd/containerd.toml

Installing Docker now gives you not just the Docker service (daemon) but also the docker command line utility, or the Docker client. We'll explore how to use the docker command later in this tutorial.

Step 2 — Executing the Docker Command Without Sudo (Optional)

By default, the docker command can only be run the root user or by a user in the docker group, which is automatically created during Docker's installation process. If you attempt to run the docker command without prefixing it with sudo or without being in the docker group, you'll get an output like this:

Output
docker: Cannot connect to the Docker daemon. Is the docker daemon running on this host?. See 'docker run --help'.

If you want to avoid typing sudo whenever you run the docker command, add your username to the docker group:

  • sudo usermod -aG docker ${USER}

To apply the new group membership, log out of the server and back in, or type the following:

  • su - ${USER}

You will be prompted to enter your user's password to continue.

Confirm that your user is now added to the docker group by typing:

  • id -nG
Output
sammy sudo docker

If you need to add a user to the docker group that you're not logged in as, declare that username explicitly using:

  • sudo usermod -aG docker username

The rest of this article assumes you are running the docker command as a user in the docker group. If you choose not to, please prepend the commands with sudo.

Let's explore the docker command next.

Step 3 — Using the Docker Command

Using docker consists of passing it a chain of options and commands followed by arguments. The syntax takes this form:

  • docker [option] [command] [arguments]

To view all available subcommands, type:

  • docker

As of Docker 18, the complete list of available subcommands includes:

Output
attach Attach local standard input, output, and error streams to a running container build Build an image from a Dockerfile commit Create a new image from a container's changes cp Copy files/folders between a container and the local filesystem create Create a new container diff Inspect changes to files or directories on a container's filesystem events Get real time events from the server exec Run a command in a running container export Export a container's filesystem as a tar archive history Show the history of an image images List images import Import the contents from a tarball to create a filesystem image info Display system-wide information inspect Return low-level information on Docker objects kill Kill one or more running containers load Load an image from a tar archive or STDIN login Log in to a Docker registry logout Log out from a Docker registry logs Fetch the logs of a container pause Pause all processes within one or more containers port List port mappings or a specific mapping for the container ps List containers pull Pull an image or a repository from a registry push Push an image or a repository to a registry rename Rename a container restart Restart one or more containers rm Remove one or more containers rmi Remove one or more images run Run a command in a new container save Save one or more images to a tar archive (streamed to STDOUT by default) search Search the Docker Hub for images start Start one or more stopped containers stats Display a live stream of container(s) resource usage statistics stop Stop one or more running containers tag Create a tag TARGET_IMAGE that refers to SOURCE_IMAGE top Display the running processes of a container unpause Unpause all processes within one or more containers update Update configuration of one or more containers version Show the Docker version information wait Block until one or more containers stop, then print their exit codes

To view the options available to a specific command, type:

  • docker docker-subcommand --help

To view system-wide information about Docker, use:

  • docker info

Let's explore some of these commands. We'll start by working with images.

Step 4 — Working with Docker Images

Docker containers are built from Docker images. By default, Docker pulls these images from [Docker Hub](https://hub.docker.com], a Docker registry managed by Docker, the company behind the Docker project. Anyone can host their Docker images on Docker Hub, so most applications and Linux distributions you'll need will have images hosted there.

To check whether you can access and download images from Docker Hub, type:

  • docker run hello-world

The output will indicate that Docker in working correctly:

Output
Unable to find image 'hello-world:latest' locally latest: Pulling from library/hello-world 9bb5a5d4561a: Pull complete Digest: sha256:3e1764d0f546ceac4565547df2ac4907fe46f007ea229fd7ef2718514bcec35d Status: Downloaded newer image for hello-world:latest Hello from Docker! This message shows that your installation appears to be working correctly. ...

Docker was initially unable to find the hello-world image locally, so it downloaded the image from Docker Hub, which is the default repository. Once the image downloaded, Docker created a container from the image and the application within the container executed, displaying the message.

You can search for images available on Docker Hub by using the docker command with the search subcommand. For example, to search for the Ubuntu image, type:

  • docker search ubuntu

The script will crawl Docker Hub and return a listing of all images whose name match the search string. In this case, the output will be similar to this:

Output
NAME DESCRIPTION STARS OFFICIAL AUTOMATED ubuntu Ubuntu is a Debian-based Linux operating sys… 7917 [OK] dorowu/ubuntu-desktop-lxde-vnc Ubuntu with openssh-server and NoVNC 193 [OK] rastasheep/ubuntu-sshd Dockerized SSH service, built on top of offi… 156 [OK] ansible/ubuntu14.04-ansible Ubuntu 14.04 LTS with ansible 93 [OK] ubuntu-upstart Upstart is an event-based replacement for th… 87 [OK] neurodebian NeuroDebian provides neuroscience research s… 50 [OK] ubuntu-debootstrap debootstrap --variant=minbase --components=m… 38 [OK] 1and1internet/ubuntu-16-nginx-php-phpmyadmin-mysql-5 ubuntu-16-nginx-php-phpmyadmin-mysql-5 36 [OK] nuagebec/ubuntu Simple always updated Ubuntu docker images w… 23 [OK] tutum/ubuntu Simple Ubuntu docker images with SSH access 18 i386/ubuntu Ubuntu is a Debian-based Linux operating sys… 13 ppc64le/ubuntu Ubuntu is a Debian-based Linux operating sys… 12 1and1internet/ubuntu-16-apache-php-7.0 ubuntu-16-apache-php-7.0 10 [OK] 1and1internet/ubuntu-16-nginx-php-phpmyadmin-mariadb-10 ubuntu-16-nginx-php-phpmyadmin-mariadb-10 6 [OK] eclipse/ubuntu_jdk8 Ubuntu, JDK8, Maven 3, git, curl, nmap, mc, … 6 [OK] codenvy/ubuntu_jdk8 Ubuntu, JDK8, Maven 3, git, curl, nmap, mc, … 4 [OK] darksheer/ubuntu Base Ubuntu Image -- Updated hourly 4 [OK] 1and1internet/ubuntu-16-apache ubuntu-16-apache 3 [OK] 1and1internet/ubuntu-16-nginx-php-5.6-wordpress-4 ubuntu-16-nginx-php-5.6-wordpress-4 3 [OK] 1and1internet/ubuntu-16-sshd ubuntu-16-sshd 1 [OK] pivotaldata/ubuntu A quick freshening-up of the base Ubuntu doc… 1 1and1internet/ubuntu-16-healthcheck ubuntu-16-healthcheck 0 [OK] pivotaldata/ubuntu-gpdb-dev Ubuntu images for GPDB development 0 smartentry/ubuntu ubuntu with smartentry 0 [OK] ossobv/ubuntu ...

In the OFFICIAL column, OK indicates an image built and supported by the company behind the project. Once you've identified the image that you would like to use, you can download it to your computer using the pull subcommand.

Execute the following command to download the official ubuntu image to your computer:

  • docker pull ubuntu

You'll see the following output:

Output
Using default tag: latest latest: Pulling from library/ubuntu 6b98dfc16071: Pull complete 4001a1209541: Pull complete 6319fc68c576: Pull complete b24603670dc3: Pull complete 97f170c87c6f: Pull complete Digest: sha256:5f4bdc3467537cbbe563e80db2c3ec95d548a9145d64453b06939c4592d67b6d Status: Downloaded newer image for ubuntu:latest

After an image has been downloaded, you can then run a container using the downloaded image with the run subcommand. As you saw with the hello-world example, if an image has not been downloaded when docker is executed with the run subcommand, the Docker client will first download the image, then run a container using it.

To see the images that have been downloaded to your computer, type:

  • docker images

The output should look similar to the following:

Output
REPOSITORY TAG IMAGE ID CREATED SIZE ubuntu latest 113a43faa138 4 weeks ago 81.2MB hello-world latest e38bc07ac18e 2 months ago 1.85kB

As you'll see later in this tutorial, images that you use to run containers can be modified and used to generate new images, which may then be uploaded (pushed is the technical term) to Docker Hub or other Docker registries.

Let's look at how to run containers in more detail.

Step 5 — Running a Docker Container

The hello-world container you ran in the previous step is an example of a container that runs and exits after emitting a test message. Containers can be much more useful than that, and they can be interactive. After all, they are similar to virtual machines, only more resource-friendly.

As an example, let's run a container using the latest image of Ubuntu. The combination of the -i and -t switches gives you interactive shell access into the container:

  • docker run -it ubuntu

Your command prompt should change to reflect the fact that you're now working inside the container and should take this form:

Output
root@d9b100f2f636:/#

Note the container id in the command prompt. In this example, it is d9b100f2f636. You'll need that container ID later to identify the container when you want to remove it.

Now you can run any command inside the container. For example, let's update the package database inside the container. You don't need to prefix any command with sudo, because you're operating inside the container as the root user:

  • apt update

Then install any application in it. Let's install Node.js:

  • apt install nodejs

This installs Node.js in the container from the official Ubuntu repository. When the installation finishes, verify that Node.js is installed:

  • node -v

You'll see the version number displayed in your terminal:

Output
v8.10.0

Any changes you make inside the container only apply to that container.

To exit the container, type exit at the prompt.

Let's look at managing the containers on our system next.

Step 6 — Managing Docker Containers

After using Docker for a while, you'll have many active (running) and inactive containers on your computer. To view the active ones, use:

  • docker ps

You will see output similar to the following:

Output
CONTAINER ID IMAGE COMMAND CREATED

In this tutorial, you started two containers; one from the hello-world image and another from the ubuntu image. Both containers are no longer running, but they still exist on your system.

To view all containers — active and inactive, run docker ps with the -a switch:

  • docker ps -a

You'll see output similar to this:

d9b100f2f636        ubuntu              "/bin/bash"         About an hour ago   Exited (0) 8 minutes ago                           sharp_volhard
01c950718166        hello-world         "/hello"            About an hour ago   Exited (0) About an hour ago                       festive_williams

To view the latest container you created, pass it the -l switch:

  • docker ps -l
  • CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
  • d9b100f2f636 ubuntu "/bin/bash" About an hour ago Exited (0) 10 minutes ago sharp_volhard

To start a stopped container, use docker start, followed by the container ID or the container's name. Let's start the Ubuntu-based container with the ID of d9b100f2f636:

  • docker start d9b100f2f636

The container will start, and you can use docker ps to see its status:

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
d9b100f2f636        ubuntu              "/bin/bash"         About an hour ago   Up 8 seconds                            sharp_volhard

To stop a running container, use docker stop, followed by the container ID or name. This time, we'll use the name that Docker assigned the container, which is sharp_volhard:

  • docker stop sharp_volhard

Once you've decided you no longer need a container anymore, remove it with the docker rm command, again using either the container ID or the name. Use the docker ps -a command to find the container ID or name for the container associated with the hello-world image and remove it.

  • docker rm festive_williams

You can start a new container and give it a name using the --name switch. You can also use the --rm switch to create a container that removes itself when it's stopped. See the docker run help command for more information on these options and others.

Containers can be turned into images which you can use to build new containers. Let's look at how that works.

Step 7 — Committing Changes in a Container to a Docker Image

When you start up a Docker image, you can create, modify, and delete files just like you can with a virtual machine. The changes that you make will only apply to that container. You can start and stop it, but once you destroy it with the docker rm command, the changes will be lost for good.

This section shows you how to save the state of a container as a new Docker image.

After installing Node.js inside the Ubuntu container, you now have a container running off an image, but the container is different from the image you used to create it. But you might want to reuse this Node.js container as the basis for new images later.

Then commit the changes to a new Docker image instance using the following command.

  • docker commit -m "What you did to the image" -a "Author Name" container_id repository/new_image_name

The -m switch is for the commit message that helps you and others know what changes you made, while -a is used to specify the author. The container_id is the one you noted earlier in the tutorial when you started the interactive Docker session. Unless you created additional repositories on Docker Hub, the repository is usually your Docker Hub username.

For example, for the user sammy, with the container ID of d9b100f2f636, the command would be:

  • docker commit -m "added Node.js" -a "sammy" d9b100f2f636 sammy/ubuntu-nodejs

When you commit an image, the new image is saved locally on your computer. Later in this tutorial, you'll learn how to push an image to a Docker registry like Docker Hub so others can access it.

Listing the Docker images again will show the new image, as well as the old one that it was derived from:

  • docker images

You'll see output like this:

Output
REPOSITORY TAG IMAGE ID CREATED SIZE sammy/ubuntu-nodejs latest 7c1f35226ca6 7 seconds ago 179MB ubuntu latest 113a43faa138 4 weeks ago 81.2MB hello-world latest e38bc07ac18e 2 months ago 1.85kB

In this example, ubuntu-nodejs is the new image, which was derived from the existing ubuntu image from Docker Hub. The size difference reflects the changes that were made. And in this example, the change was that NodeJS was installed. So next time you need to run a container using Ubuntu with NodeJS pre-installed, you can just use the new image.

You can also build Images from a Dockerfile, which lets you automate the installation of software in a new image. However, that's outside the scope of this tutorial.

Now let's share the new image with others so they can create containers from it.

Step 8 — Pushing Docker Images to a Docker Repository

The next logical step after creating a new image from an existing image is to share it with a select few of your friends, the whole world on Docker Hub, or other Docker registry that you have access to. To push an image to Docker Hub or any other Docker registry, you must have an account there.

This section shows you how to push a Docker image to Docker Hub. To learn how to create your own private Docker registry, check out How To Set Up a Private Docker Registry on Ubuntu 14.04.

To push your image, first log into Docker Hub.

  • docker login -u docker-registry-username

You'll be prompted to authenticate using your Docker Hub password. If you specified the correct password, authentication should succeed. Then you may push your own image using:

  • docker push docker-registry-username/docker-image-name

To push the ubuntu-nodejs image to the sammy repository, the command would be:

  • docker push sammy/ubuntu-nodejs

The process may take some time to complete as it uploads the images, but when completed, the output will look like this:

Output
The push refers to a repository [docker.io/sammy/ubuntu-nodejs] e3fbbfb44187: Pushed 5f70bf18a086: Pushed a3b5c80a4eba: Pushed 7f18b442972b: Pushed 3ce512daaf78: Pushed 7aae4540b42d: Pushed ...

After pushing an image to a registry, it should be listed on your account's dashboard, like that show in the image below.

New Docker image listing on Docker Hub

If a push attempt results in an error of this sort, then you likely did not log in:

Output
The push refers to a repository [docker.io/sammy/ubuntu-nodejs] e3fbbfb44187: Preparing 5f70bf18a086: Preparing a3b5c80a4eba: Preparing 7f18b442972b: Preparing 3ce512daaf78: Preparing 7aae4540b42d: Waiting unauthorized: authentication required

Log in with docker loginand repeat the push attempt. Then verify that it exists on your Docker Hub repository page.

You can now use docker pull sammy/ubuntu-node<^> to pull the image to a new machine and use it to run a new container.

Conclusion

In this tutorial you installed Docker, worked with images and containers, and pushed a modified image to Docker Hub. Now that you know the basics, explore the other Docker tutorials in the DigitalOcean Community.

5 Comments

Creative Commons License