Tutorial

How To Install WordPress with LAMP on Debian 9

How To Install WordPress with LAMP on Debian 9
Not using Debian 9?Choose a different version or distribution.
Debian 9

Introduction

WordPress is the most popular CMS (content management system) on the internet. It allows you to easily set up flexible blogs and websites on top of a MariaDB backend with PHP processing. WordPress has seen incredible adoption and is a great choice for getting a website up and running quickly. After setup, almost all administration can be done through the web frontend.

In this guide, we’ll focus on getting a WordPress instance set up on a LAMP stack (Linux, Apache, MariaDB, and PHP) on a Debian 9 server.

Prerequisites

In order to complete this tutorial, you will need access to a Debian 9 server.

You will need to perform the following tasks before you can start this guide:

  • Create a sudo user on your server: We will be completing the steps in this guide using a non-root user with sudo privileges. You can create a user with sudo privileges by following our Debian 9 initial server setup guide.
  • Install a LAMP stack: WordPress will need a web server, a database, and PHP in order to correctly function. Setting up a LAMP stack (Linux, Apache, MariaDB, and PHP) fulfills all of these requirements. Follow this guide to install and configure this software.
  • Secure your site with SSL: WordPress serves dynamic content and handles user authentication and authorization. TLS/SSL is the technology that allows you to encrypt the traffic from your site so that your connection is secure. The way you set up SSL will depend on whether you have a domain name for your site.
    • If you have a domain name… the easiest way to secure your site is with Let’s Encrypt, which provides free, trusted certificates. Follow our Let’s Encrypt guide for Apache to set this up.
    • If you do not have a domain… and you are just using this configuration for testing or personal use, you can use a self-signed certificate instead. This provides the same type of encryption, but without the domain validation. Follow our self-signed SSL guide for Apache to get set up.

When you are finished with the setup steps, log in to your server as your sudo user and continue below.

Step 1 — Creating a MariaDB Database and User for WordPress

The first step that we will take is a preparatory one. WordPress uses MySQL to manage and store site and user information. We have MariaDB — a drop-in replacement for MySQL — installed already, but we need to make a database and a user for WordPress to use.

To get started, open up the MariaDB prompt as the root account:

  1. sudo mariadb

Note: If you set up another account with administrative privileges when you installed and set up MariaDB, you can also log in as that user. You’ll need to do so with the following command:

  1. mariadb -u username -p

After issuing this command, MariaDB will prompt you for the password you set for that account.

Begin by creating a new database that WordPress will control. You can call this whatever you would like but, to keep it simple for this guide, we will name it wordpress.

Create the database for WordPress by typing:

  1. CREATE DATABASE wordpress DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;

Note that every MySQL statement must end in a semi-colon (;). Check to make sure this is present if you are running into any issues.

Next, create a separate MySQL user account that we will use exclusively to operate on our new database. Creating single-function databases and accounts is a good idea from a management and security standpoint. We will use the name wordpressuser in this guide, but feel free to change this if you’d like.

Create this account, set a password, and grant the user access to the database you just created with the following command. Remember to choose a strong password for your database user:

  1. GRANT ALL ON wordpress.* TO 'wordpressuser'@'localhost' IDENTIFIED BY 'password';

You now have a database and user account, each made specifically for WordPress. Run the following command to reload the grant tables so that the current instance of MariaDB knows about the changes you’ve made:

  1. FLUSH PRIVILEGES;

Exit out of MariaDB by typing:

  1. EXIT;

Now that you’ve configured the database and user that will be used by WordPress, you can move on to installing some PHP-related packages used by the CMS.

Step 2 — Installing Additional PHP Extensions

When setting up our LAMP stack, we only required a very minimal set of extensions in order to get PHP to communicate with MariaDB. WordPress and many of its plugins leverage additional PHP extensions.

Download and install some of the most popular PHP extensions for use with WordPress by typing:

  1. sudo apt update
  2. sudo apt install php-curl php-gd php-mbstring php-xml php-xmlrpc php-soap php-intl php-zip

Note: Each WordPress plugin has its own set of requirements. Some may require additional PHP packages to be installed. Check your plugin documentation to find its PHP requirements. If they are available, they can be installed with apt as demonstrated above.

We will restart Apache to load these new extensions in the next section. If you are returning here to install additional plugins, you can restart Apache now by typing:

  1. sudo systemctl restart apache2

At this point, all that’s left to do before installing WordPress is to make some changes to your Apache configuration in order to allow the CMS to function smoothly.

Step 3 — Adjusting Apache’s Configuration to Allow for .htaccess Overrides and Rewrites

With the additional PHP extensions installed and ready for use, the next thing to do is to make a few changes to your Apache configuration. Based on the prerequisite tutorials, you should have a configuration file for your site in the /etc/apache2/sites-available/ directory. We’ll use /etc/apache2/sites-available/wordpress.conf as an example here, but you should substitute the path to your configuration file where appropriate.

Additionally, we will use /var/www/wordpress as the root directory of our WordPress install. You should use the web root specified in your own configuration.

Note: It’s possible you are using the 000-default.conf default configuration (with /var/www/html as your web root). This is fine to use if you’re only going to host one website on this server. If not, it’s best to split the necessary configuration into logical chunks, one file per site.

Currently, the use of .htaccess files is disabled. WordPress and many WordPress plugins use these files extensively for in-directory tweaks to the web server’s behavior.

Open the Apache configuration file for your website. Note that if you have an existing Apache configuration file for your website, this file’s name will be different:

  1. sudo nano /etc/apache2/sites-available/wordpress.conf

To allow .htaccess files, you’ll need to add a Directory block pointing to your document root with an AllowOverride directive within it. Add the following block of text inside the VirtualHost block in your configuration file, being sure to use the correct web root directory:

/etc/apache2/sites-available/wordpress.conf
<Directory /var/www/wordpress/>
	AllowOverride All
</Directory>

When you are finished, save and close the file.

Next, enable the rewrite module in order to utilize the WordPress permalink feature:

  1. sudo a2enmod rewrite

Before implementing the changes you’ve made, check to make sure that you haven’t made any syntax errors:

  1. sudo apache2ctl configtest

If your configuration file’s syntax is correct, you’ll see the following in your output:

Output
Syntax OK

If this command reports any errors, go back and check that you haven’t made any syntax errors in your configuration file. Otherwise, restart Apache to implement the changes:

  1. sudo systemctl restart apache2

Next, we will download and set up WordPress itself.

Step 4 — Downloading WordPress

Now that your server software is configured, you can download and set up WordPress. For security reasons in particular, it is always recommended to get the latest version of WordPress directly from their site.

Note: We will use curl to download WordPress, but this program may not be installed by default on your Debian server. To install it, run:

  1. sudo apt install curl

Change into a writable directory and then download the compressed release by typing:

  1. cd /tmp
  2. curl -O https://wordpress.org/latest.tar.gz

Extract the compressed file to create the WordPress directory structure:

  1. tar xzvf latest.tar.gz

We will move these files into our document root momentarily. Before we do, though, add a dummy .htaccess file so that this will be available for WordPress to use later.

Create the file by typing:

  1. touch /tmp/wordpress/.htaccess

Then copy over the sample configuration file to the filename that WordPress actually reads:

  1. cp /tmp/wordpress/wp-config-sample.php /tmp/wordpress/wp-config.php

Additionally, create the upgrade directory so that WordPress won’t run into permissions issues when trying to do this on its own following an update to its software:

  1. mkdir /tmp/wordpress/wp-content/upgrade

Then, copy the entire contents of the directory into your document root. Notice that the following command includes a dot at the end of the source directory to indicate that everything within the directory should be copied, including hidden files (like the .htaccess file you created):

  1. sudo cp -a /tmp/wordpress/. /var/www/wordpress

With that, you’ve successfully installed WordPress onto your web server and performed some of the initial configuration steps. Next, we’ll discuss some further configuration changes that will give WordPress the privileges it needs to function as well as access to the MariaDB database and user account you created previously.

Step 5 — Configuring the WordPress Directory

Before we can go through the web-based setup process for WordPress, we need to adjust some items in our WordPress directory.

Start by giving ownership of all the files to the www-data user and group. This is the user that the Apache web server runs as, and Apache will need to be able to read and write WordPress files in order to serve the website and perform automatic updates.

Update the ownership with chown:

  1. sudo chown -R www-data:www-data /var/www/wordpress

Next we will run two find commands to set the correct permissions on the WordPress directories and files:

  1. sudo find /var/www/wordpress/ -type d -exec chmod 750 {} \;
  2. sudo find /var/www/wordpress/ -type f -exec chmod 640 {} \;

These should be a reasonable permissions set to start with, although some plugins and procedures might require additional tweaks.

Following this, you will need to make some changes to the main WordPress configuration file.

When you open the file, your first objective will be to adjust some secret keys to provide some security for your installation. WordPress provides a secure generator for these values so that you do not have to try to come up with good values on your own. These are only used internally, so it won’t hurt usability to have complex, secure values here.

To grab secure values from the WordPress secret key generator, type:

  1. curl -s https://api.wordpress.org/secret-key/1.1/salt/

You will get back unique values that look something like this:

Warning! It is important that you request unique values each time. Do NOT copy the values shown below!

Output
define('AUTH_KEY', '1jl/vqfs<XhdXoAPz9 DO NOT COPY THESE VALUES c_j{iwqD^<+c9.k<J@4H'); define('SECURE_AUTH_KEY', 'E2N-h2]Dcvp+aS/p7X DO NOT COPY THESE VALUES {Ka(f;rv?Pxf})CgLi-3'); define('LOGGED_IN_KEY', 'W(50,{W^,OPB%PB<JF DO NOT COPY THESE VALUES 2;y&,2m%3]R6DUth[;88'); define('NONCE_KEY', 'll,4UC)7ua+8<!4VM+ DO NOT COPY THESE VALUES #`DXF+[$atzM7 o^-C7g'); define('AUTH_SALT', 'koMrurzOA+|L_lG}kf DO NOT COPY THESE VALUES 07VC*Lj*lD&?3w!BT#-'); define('SECURE_AUTH_SALT', 'p32*p,]z%LZ+pAu:VY DO NOT COPY THESE VALUES C-?y+K0DK_+F|0h{!_xY'); define('LOGGED_IN_SALT', 'i^/G2W7!-1H2OQ+t$3 DO NOT COPY THESE VALUES t6**bRVFSD[Hi])-qS`|'); define('NONCE_SALT', 'Q6]U:K?j4L%Z]}h^q7 DO NOT COPY THESE VALUES 1% ^qUswWgn+6&xqHN&%');

These are configuration lines that you will paste directly into your configuration file to set secure keys. Copy the output you received to your clipboard, and then open the WordPress configuration file located in your document root:

  1. sudo nano /var/www/wordpress/wp-config.php

Find the section that contains the dummy values for those settings. It will look something like this:

/var/www/wordpress/wp-config.php
. . .

define('AUTH_KEY',         'put your unique phrase here');
define('SECURE_AUTH_KEY',  'put your unique phrase here');
define('LOGGED_IN_KEY',    'put your unique phrase here');
define('NONCE_KEY',        'put your unique phrase here');
define('AUTH_SALT',        'put your unique phrase here');
define('SECURE_AUTH_SALT', 'put your unique phrase here');
define('LOGGED_IN_SALT',   'put your unique phrase here');
define('NONCE_SALT',       'put your unique phrase here');

. . .

Delete these lines and paste in the values you copied from the command line:

/var/www/wordpress/wp-config.php
. . .

define('AUTH_KEY',         'VALUES COPIED FROM THE COMMAND LINE');
define('SECURE_AUTH_KEY',  'VALUES COPIED FROM THE COMMAND LINE');
define('LOGGED_IN_KEY',    'VALUES COPIED FROM THE COMMAND LINE');
define('NONCE_KEY',        'VALUES COPIED FROM THE COMMAND LINE');
define('AUTH_SALT',        'VALUES COPIED FROM THE COMMAND LINE');
define('SECURE_AUTH_SALT', 'VALUES COPIED FROM THE COMMAND LINE');
define('LOGGED_IN_SALT',   'VALUES COPIED FROM THE COMMAND LINE');
define('NONCE_SALT',       'VALUES COPIED FROM THE COMMAND LINE');

. . .

Next, modify the database connection settings at the top of the file. You need to adjust the database name, the database user, and the associated password that you’ve configured within MariaDB.

The other change you must make is to set the method that WordPress should use to write to the filesystem. Since we’ve given the web server permission to write where it needs to, we can explicitly set the filesystem method to “direct”. Failure to set this with our current settings would result in WordPress prompting for FTP credentials when you perform certain actions.

This setting can be added below the database connection settings, or anywhere else in the file:

/var/www/wordpress/wp-config.php
. . .

define('DB_NAME', 'wordpress');

/** MySQL database username */
define('DB_USER', 'wordpressuser');

/** MySQL database password */
define('DB_PASSWORD', 'password');

. . .

define('FS_METHOD', 'direct');

Save and close the file when you are finished. Finally, you can finish installing and configuring WordPress by accessing it through your web browser.

Step 6 — Completing the Installation Through the Web Interface

Now that the server configuration is complete, we can complete the installation through the web interface.

In your web browser, navigate to your server’s domain name or public IP address:

https://server_domain_or_IP

Select the language you would like to use:

WordPress language selection

Next, you will come to the main setup page. Select a name for your WordPress site and choose a username (it is recommended not to choose something like “admin” for security purposes). A strong password is generated automatically. Save this password or select an alternative strong password.

Enter your email address and select whether you want to discourage search engines from indexing your site:

WordPress setup installation

When ready, click the Install WordPress button. You’ll be taken to a page that prompts you to log in:

WordPress login prompt

Once you log in, you will be taken to the WordPress administration dashboard:

WordPress login prompt

From the dashboard, you can begin making changes to your site’s theme and publishing content.

Conclusion

WordPress should be installed and ready to use! Some common next steps are to choose the permalinks setting for your posts (which can be found in Settings > Permalinks) or to select a new theme (in Appearance > Themes). If this is your first time using WordPress, explore the interface a bit to get acquainted with your new CMS.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors


Default avatar

Manager, Developer Education

Technical Writer @ DigitalOcean


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
5 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

You guys rock! I like it when the instructions are clear (like this) and it works when I’m done. I can then go back and analyze what I just did.

Thanks.

I change db type to utf8mb4 and collate to utf8mb4_unicode_ci for Debian 9 which uses MariaDB v10.1 by default. Also needs to be changed in wp-config.php

This tutorial forget to enable the configuration file in Step 3. Type: sudo a2ensite wordpress.conf

I’ve done all things correct from step1 to step5. But when I type my server ip into my browser , it still return the Apache2 welcome page! Why?

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel