It can be tempting to think because a server has just recently been brought up, sees little traffic, or offers nothing that seems of value to hackers that it will go unnoticed. However, many exploits are automated and specifically designed to look for common errors in configuration. These programs scan networks to discover servers, independent of the nature of the content.
Allowing remote connections is one of the common and more easily rectified situations that can lead to the exploit of a PostgreSQL database. This happens because certain configurations make it easy for programs like these to discover the server.
In this tutorial, we will show how to mitigate the specific risk posed by allowing remote connections. While this is an important first step, since servers can be compromised in other ways, we also recommend that you take additional measures to protect your data, outlined in the Additional Security Considerations.
To understand the specific risk we’re mitigating, imagine the server as a store. If the server is listening on any port at all, it’s a little like turning on a neon “Open” sign. It makes the server itself visible on the network, where automated scripts can find it.
We can think of each port as way to enter the store, like a door or a window. These entrances may be open, closed, locked, or broken depending on the state of the software that’s listening, but listening on a public interface means that a script seeking to get inside can start trying. For example, the script might be configured to attempt to log in with a default password on the chance that it hasn’t been changed. It might attempt known exploits of the listening daemon in case it hasn’t been patched. Whatever the script tries, if it is able to find a weakness and exploit it, then the intruder is inside and can get down to the serious business of compromising the server.
When we restrict a daemon like
postgresql to listening locally, it’s like that particular door to the outside doesn’t exist. There’s no next step to try, at least with respect to Postgres. Firewalls and VPNs protect in a similar way. In this tutorial, we’ll focus on removing PostgreSQL as a publicly accessible doorway. To secure the daemon itself or the data as it is transmitted or stored, see Additional Security Considerations.
In this tutorial, we’ll use two Ubuntu installations, one for the database host and one as the client that will be connecting to the host remotely. Each one should have a
sudo user and the firewall enabled. The guide, Initial Server Setup with Ubuntu 16.04 can help you with this.
One Ubuntu 16.04 PostgreSQL Database Host:
If you haven’t install PostgreSQL yet, you can do so with the following commands:
- sudo apt-get update
- sudo apt-get install postgresql postgresql-contrib
One Ubuntu 16.04 Client Machine:
In order to demonstrate and test allowing remote connections, we’ll use the PostgreSQL client,
psql. To install it, use the following commands:
- sudo apt-get update
- sudo apt-get install postgresql-client
When these prerequisites are in place, you’re ready to follow along.
When PostgreSQL is installed from the Ubuntu packages, by default it is restricted to listening on localhost. This default can be changed by overriding the
listen_addresses in the
postgresql.conf file, but the default prevents the server from automatically listening on a public interface.
In addition, the
pg_hba.conf file only allows connections from Unix/Linux domain sockets and the local loopback address for the server, so it wouldn’t accept connections from external hosts:
# Put your actual configuration here # ---------------------------------- # # If you want to allow non-local connections, you need to add more # "host" records. In that case you will also need to make PostgreSQL # listen on a non-local interface via the listen_addresses # configuration parameter, or via the -i or -h command line switches. # DO NOT DISABLE! # If you change this first entry you will need to make sure that the # database superuser can access the database using some other method. # Noninteractive access to all databases is required during automatic # maintenance (custom daily cronjobs, replication, and similar tasks). # # Database administrative login by Unix domain socket local all postgres peer # TYPE DATABASE USER ADDRESS METHOD # "local" is for Unix domain socket connections only local all all peer # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5
These defaults meet the objective of not listening on a public interface. If we leave them intact and keep our firewall up, we’re done! We can proceed directly to the Additional Security Considerations to learn how to secure data in transit.
If you need to connect from a remote host, we’ll cover how to override the defaults as well as the immediate steps you can take to protect the server in the next section.
For a production setup and before we start working with sensitive data, ideally we’ll have PostgreSQL traffic encrypted with SSL in transit, secured behind an external firewall, or protected by a virtual private network (VPN). As we work toward that, we can take the somewhat less complicated step of enabling a firewall on our database server and restricting access to the hosts that need it.
We’ll begin by adding a user and database that will allow us to test our work. To do so, we’ll use the PostgreSQL client,
psql, to connect as the administrative user
postgres. By passing the
-i option to
sudo we’ll run the postgres user’s login shell, which ensures that we load options from the
.profile or other login-specific resources.
-u species the postgres user:
- sudo -i -u postgres psql
Next, we’ll create a user with a password. Be sure to use secure password in place of the example highlighted below:
- CREATE USER sammy WITH PASSWORD 'password';
When the user is successfully created, we should receive the following output:
Note: Since PostgreSQL 8.1, ROLES and USERS are synonymous. By convention, a role that has a password is still called a USER, while a role that does not is called a ROLE, so sometimes we will see ROLE in output where we might expect to see USER.
Next, we’ll create a database and grant full access to our new user. Best practices recommend that we grant users only the access that they need and only on the resources where they should have them, so depending on the use case, it may be appropriate to restrict a user’s access even more. You can learn more about permissions in the guide How To Use Roles and Manage Grant Permissions in PostgreSQL on a VPS.
- CREATE DATABASE sammydb OWNER sammy;
When the database is created successfully, we should receive confirmation:
Now, that we’ve created a user and database, we’ll exit the monitor
After pressing ENTER, we’ll be at the command prompt and ready to continue.
In the Initial Server Setup with Ubuntu 16.04 prerequisite, we enabled UFW and only allowed SSH connections. Before we start our configuration, let’s verify UFW’s status:
- sudo ufw status
Note: If the output indicates that the firewall is
inactive we can activate it with:
- sudo ufw enable
Once it’s enabled, rerunning the status command,
sudo ufw status will show the current rules. If necessary, be sure to allow SSH.
- sudo ufw allow OpenSSH
Unless we made changes to the prerequisites, the output should show that only OpenSSH is allowed:
OutputStatus: active To Action From -- ------ ---- OpenSSH ALLOW Anywhere OpenSSH (v6) ALLOW Anywhere (v6)
Now that we’ve checked the firewall status, we will allow access to the PostgreSQL port and restrict it to the host or hosts we want to allow.
The command below will add the rule for the PostgreSQL default port, which is 5432. If you’ve changed that port, be sure to update it in the command below. Make sure that you’ve used the IP address of the server that needs access. If need be, re-run this command to add each client IP address that needs access:
- sudo ufw allow from client_ip_address to any port 5432
To double-check the rule, we can run
ufw status again:
- sudo ufw status
OutputTo Action From -- ------ ---- OpenSSH ALLOW Anywhere 5432 ALLOW client_ip_address OpenSSH (v6) ALLOW Anywhere (v6)
<$>[note] Note: If you’re new to UFW, you can learn more in the guide UFW Essentials: Common Firewall Rules and Commands.
With this firewall rule in place, we’ll now configure PostgreSQL to listen on its public IP address. This requires a combination of two settings, an entry for the connecting host in
pg_hba.conf and configuration of the listen_addresses in
We’ll start by adding the host entry in
pg_hba.conf. If you have a different version of PostgreSQL installed, be sure to substitute it in the path below:
- sudo nano /etc/postgresql/9.5/main/pg_hba.conf
We’ll place the
host lines under the comment block that describes how to allow non-local connections. We’ll also include a line with the public address of the database server so we can quickly test that our firewall is configured correctly. Be sure to substitute the hostname or IP address of your machines in the example below.
# If you want to allow non-local connections, you need to add more # "host" records. In that case you will also need to make PostgreSQL # listen on a non-local interface via the listen_addresses # configuration parameter, or via the -i or -h command line switches. host sammydb sammy client_ip_address/32 md5
Before we save our changes, let’s focus on each of the values in this line in case you want to change some of the options:
host, establishes that a TCP/IP connection will be used.
sammydbThe second column indicates which database/s the host can connect to. More than one database can be added by separating the names with commas.
sammyindicates the user that is allowed to make the connection. As with the database column, multiple users can be specified, separated by commas.
md5indicates a double-MD5-hashed password will be supplied for authentication. You’ll need to do nothing more than supply the password that was created for the user connecting.
For a more complete discussion of these and additional settings, see The
pg_hba.conf File PostgreSQL documentation.
Once you’re done, save and exit the file.
Next we’ll set the listen address in the
- sudo nano /etc/postgresql/9.5/main/postgresql.conf
listen_addresses line and below it, define your listen addresses, being sure to substitute the hostname or IP address of your database host. You may want to double-check that you’re using the public IP of the database server, not the connecting client:
#listen_addresses = 'localhost' # what IP address(es) to listen on; listen_addresses = 'localhost,server_ip_address'
When you’re done save and exit the file.
Our configuration changes won’t take effect until we restart the PostgreSQL daemon, so we’ll do that before we test:
- sudo systemctl restart postgresql
systemctl doesn’t provide feedback, we’ll check the status to make sure the daemon restarted successfully:
- sudo systemctl status postgresql
If the output contains “Active: active” and ends with something like the following, then the PostgreSQL daemon is running.
Output... Jan 10 23:02:20 PostgreSQL systemd: Started PostgreSQL RDBMS.
Now that we’ve restarted the daemon, we’re ready to test.
Finally, let’s test that we can connect from our client machine. To do this, we’ll use
-U to specify the user,
-h to specify the client’s IP address, and
-d to specify the database, since we’ve tightened our security so that the
sammy can only connect to a single database.
- psql -U sammy -h postgres_host_ip -d sammydb
If everything is configured correctly, you should receive the following prompt:
OutputPassword for user sammy:
Enter the password you set earlier when you added the user
sammy in the PostgreSQL monitor.
If you arrive at the following prompt, you’re successfully connected:
This confirms that we can get through the firewall and connect to the database. We’ll exit now:
Since we’ve confirmed our configuration, we’ll finish by cleaning up.
Back on the host once we’ve finished testing the connection, we can use the following commands to delete the database and the user as well.
- sudo -i -u postgres psql
To delete the database:
- DROP DATABASE sammydb;
The action is confirmed by the following output:
To delete the user:
- DROP USER sammy;
The success is confirmed by:
We’ll finish our cleanup by removing the host entry for the
sammydb database from
pg_hba.conf file since we no longer need it:
- sudo nano /etc/postgresql/9.5/main/pg_hba.conf
host sammydb sammy client_ip_address/32 md5
For the change to take effect, we’ll save and exit, then restart the database server:
- sudo systemctl restart postgresl
To be sure it restarted successfully, we’ll check the status:
- sudo systemctl status postgres
If we see “Active: active” we’ll know the restart succeeded.
At this point, we can move forward with configuring the application or service on the client that needs to connect remotely.
This tutorial is intended to mitigate the risks posed by allowing unsecured remote connections to PostgreSQL, which is a common situation that inadvertently exposes PostgreSQL to exploits. Limiting access to the listening port to specific host/s doesn’t address other significant security considerations, such as how to encrypt your data in transit.
Before working with real data, we recommend reviewing the following resources and taking the appropriate steps for your use case.
Security within PostgreSQL: GRANT statements determine which users are allowed to access any particular database, while Roles establish the privileges of those users. In combination, they provide separation between multiple databases in a single installation.
Setting up SSL with PostgreSQL: Configuring SSL will encrypt data in transit. This protects data as it is sent.
Securing PostgreSQL TCP/IP Connections with SSH Tunnels: SSH Tunnels are useful when connecting with clients that are not SSL-capable. In almost any other situation, it is preferable to set up SSL with Postgres.
In this tutorial, we’ve taken essential steps to prevent advertising our PostgreSQL installation by configuring the server’s firewall to allow connections only from hosts that require access and by configuring PostgreSQL to accept connections only from those hosts. This mitigates the risk of certain kinds of attacks. This is just the first step to securing data, and we recommend that review and implement additional security measures outlined above.
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up now
This textbox defaults to using Markdown to format your answer.
You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!
Thank you so much! This is a wonderful tutorial, very helpful and necessary.
Great post! It is one of the few well-documented posts I found on how to set up Postgres on a remote database server. I would suggest two minor modifications.
The title should also include something regarding “Setting up Postgres on a remote server”. I think the post does a great job at identifying how to secure Postgres but people may also find it useful as a guide on how to set up Postgres on a remote server like I did.
I created a server through AWS. AWS’ default security policies do not include an inbound connection to port 5432. Someone might find it useful if this is mentioned. Make sure to open a connection to port 5432 through a security policy in the AWS EC2 console.
Thanks for posting!