A question can only have one accepted answer. Are you sure you want to replace the current answer with this one?
You previously marked this answer as accepted. Are you sure you want to unaccept it?
Hi guys i ave a question how to setup any webstats, awstats or piwik (i like this) on vpn +ubuntu + severpilot is a simply manual instalation or i need do some tricks. tnx.
Piwik is a PHP application, and Serverpilot is a great option for running those. You should be able to install it simply through their interface by:
apps/APPNAME/public via SFTP.Finally, you’ll need to run through the Piwik web-based installer.
I have created a dd image of /dev/vda and i can't mount it on my local unbutu server where i transferred it I get this in dmesg | tail ``` [763158.222159] EXT4-fs error (device loop0): ext4_map_blocks:504: inode #8: block 10541546: comm mount: lblock 23018 mapped to illegal pblock (length 1) [763158.222299] jbd2_journal_bmap: journal block not found at offset 23018 on loop0-8 [763158.222367] JBD2: bad block at offset 23018 [763158.222581] JBD2: recovery failed [763158.222588] EXT4-fs (loop0): error loading journal ``` If i try to check it out with file i get: vda.img: data Any idea what it could be ?
I want to synchronize a directory from one server to another using unison with ssh. i do have iptables running but ssh and scp work between the servers. I am also using an alternate port for ssh. When I run the testServer command, it ends with exits status 0 and no files have been replicated. I have tried touching files on either side but no luck. here is a sample of the unison call and results followed by a test ssh call and results: server1_user@server1:~/.unison$ unison -testServer /home/server1_user/downloads/ ssh://unison@<server2-ip>//home/unison/unisontest -sshargs '-p 22222 -i /home/server1_user/.ssh/id_unison -vvv' -debug all [startup] Preferences: ui = graphic host = server = false prefsdocs = false doc = version = false silent = false dumbtty = false testserver = true rest = ssh://unison@<server2-ip>//home/unison/unisontest rest = /home/server1_user/downloads/ showprev = false selftest = false confirmmerge = false retry = 0 repeat = contactquietly = false key = label = expert = false height = 15 auto = false maxthreads = 0 prefer = force = sortnewfirst = false sortbysize = false keeptempfilesaftermerge = false diff = diff -u CURRENT2 CURRENT1 backupdir = maxbackups = 2 backups = false backupsuffix = backupprefix = .bak.$VERSION. backuploc = central copymax = 1 copyquoterem = default copythreshold = -1 copyprogrest = rsync --partial --append-verify --compress copyprog = rsync --partial --inplace --compress rsync = true fastcheck = default ignorelocks = false dumparchives = false ignorearchives = false showarchive = false rootsName = fat = false allHostsAreRunningWindows = false someHostIsRunningWindows = false confirmbigdel = true batch = false root = ssh://unison@<server2-ip>//home/unison/unisontest root = /home/server1_user/downloads/ killserver = false halfduplex = false stream = true addversionno = false servercmd = sshargs = -p 22222 -i /home/server1_user/.ssh/id_unison -vvv rshargs = rshcmd = rsh sshcmd = ssh xferbycopying = true sshversion = ignoreinodenumbers = false links-aux = true links = default times = false group = false owner = false numericids = false dontchmod = false perms = 1023 rsrc-aux = false rsrc = default maxerrors = 1 unicodeCS = false unicodeEnc = false unicode = default someHostIsInsensitive = false ignorecase = default timers = false terse = false logfile = /home/server1_user/.unison/unison.log log = true debugtimes = false debug = all addprefsto = Contacting server... [remote] Shell connection: ssh (ssh, -l, unison, <server2-ip>, -e, none, -p, 22222, -i, /home/server1_user/.ssh/id_unison, -vvv, unison, -server) OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <server2-ip> [<server2-ip>] port 22222. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/server1_user/.ssh/id_unison" as a RSA1 public key debug1: identity file /home/server1_user/.ssh/id_unison type 1 debug1: identity file /home/server1_user/.ssh/id_unison-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH_6.6.1* compat 0x04000000 debug2: fd 3 setting O_NONBLOCK debug3: put_host_port: [<server2-ip>]:22222 debug3: load_hostkeys: loading entries for host "[<server2-ip>]:22222" from file "/home/server1_user/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/server1_user/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-ed25519,ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: setup hmac-md5-etm@openssh.com debug1: kex: server->client aes128-ctr hmac-md5-etm@openssh.com none debug2: mac_setup: setup hmac-md5-etm@openssh.com debug1: kex: client->server aes128-ctr hmac-md5-etm@openssh.com none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 01:73:fc:4f:42:75:8e:94:b5:cd:6b:83:cf:e7:2b:e1 debug3: put_host_port: [<server2-ip>]:22222 debug3: put_host_port: [<server2-ip>]:22222 debug3: load_hostkeys: loading entries for host "[<server2-ip>]:22222" from file "/home/server1_user/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/server1_user/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "[<server2-ip>]:22222" from file "/home/server1_user/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/server1_user/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug1: Host '[<server2-ip>]:22222' is known and matches the ECDSA host key. debug1: Found key in /home/server1_user/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/server1_user/.ssh/id_unison (0x7fb468db7f10), explicit debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/server1_user/.ssh/id_unison debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 279 debug2: input_userauth_pk_ok: fp d0:87:3c:ae:77:cb:42:7d:4a:44:3b:db:cc:9e:cd:c5 debug3: sign_and_send_pubkey: RSA d0:87:3c:ae:77:cb:42:7d:4a:44:3b:db:cc:9e:cd:c5 debug1: key_parse_private2: missing begin marker debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to <server2-ip> ([<server2-ip>]:22222). debug2: fd 4 setting O_NONBLOCK debug2: fd 5 setting O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting no-more-sessions@openssh.com debug1: Entering interactive session. debug2: callback start debug2: fd 3 setting TCP_NODELAY debug3: packet_set_tos: set IP_TOS 0x08 debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env XDG_SESSION_ID debug3: Ignored env rvm_bin_path debug3: Ignored env GEM_HOME debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env IRBRC debug3: Ignored env SSH_CLIENT debug3: Ignored env OLDPWD debug3: Ignored env MY_RUBY_HOME debug3: Ignored env SSH_TTY debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env _system_type debug3: Ignored env rvm_path debug3: Ignored env rvm_prefix debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env _system_arch debug3: Ignored env _system_version debug3: Ignored env rvm_version debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env LANGUAGE debug3: Ignored env LOGNAME debug3: Ignored env GEM_PATH debug3: Ignored env SSH_CONNECTION debug3: Ignored env LESSOPEN debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env rvm_recommended_ruby debug3: Ignored env LESSCLOSE debug3: Ignored env RUBY_VERSION debug3: Ignored env _system_name debug3: Ignored env rvm_debug debug3: Ignored env _ debug3: Ignored env CYGWIN debug1: Sending command: unison -server debug2: channel 0: request exec confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: exec request accepted on channel 0 [globals] Checking path '' for expansions Connected [//server2//home/unison/unisontest -> //server1//home/server1_user/downloads] [startup] Roots: /home/server1_user/downloads/ ssh://unison@<server2-ip>//home/unison/unisontest i.e. /home/server1_user/downloads/ ssh://unison@<server2-ip>//home/unison/unisontest i.e. (in canonical order) /home/server1_user/downloads //server2//home/unison/unisontest [props] Setting permission mask to 1777 (1777 and 7777) [stasher] initBackupsLocal [stasher] d = / [stasher] Prefix and suffix regexps for backup filenames have been updated debug2: channel 0: rcvd ext data 35 [server: stasher] initBackupsLocal debug2: channel 0: written 35 to efd 6 debug2: channel 0: rcvd ext data 24 debug2: channel 0: rcvd ext data 83 [server: stasher] d = / [server: stasher] Prefix and suffix regexps for backup filenames have been updated server1_user@server1:~/.unison$ debug2: channel 0: written 107 to efd 6 debug2: channel 0: read drain debug2: channel 0: ibuf empty debug2: channel 0: send eof debug2: channel 0: input drain -> closed debug2: channel 0: rcvd ext data 49 [server: remote] Connection closed by the client debug2: channel 0: written 49 to efd 6 debug2: channel 0: rcvd eof debug2: channel 0: output open -> drain debug2: channel 0: obuf empty debug2: channel 0: close_write debug2: channel 0: output drain -> closed debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug2: channel 0: rcvd close debug3: channel 0: will not send data after close debug2: channel 0: almost dead debug2: channel 0: gc: notify user debug2: channel 0: gc: user detached debug2: channel 0: send close debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1) debug1: fd 0 clearing O_NONBLOCK debug1: fd 1 clearing O_NONBLOCK Transferred: sent 10236, received 3428 bytes, in 3.7 seconds Bytes per second: sent 2799.9, received 937.7 debug1: Exit status 0 Sample test of the ssh call: server1_user@server1:~/.unison$ ssh -i ~/.ssh/id_unison -p 22222 unison@<server2-ip> -vvv OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <server2-ip> [<server2-ip>] port 22222. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/server1_user/.ssh/id_unison" as a RSA1 public key debug1: identity file /home/server1_user/.ssh/id_unison type 1 debug1: identity file /home/server1_user/.ssh/id_unison-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH_6.6.1* compat 0x04000000 debug2: fd 3 setting O_NONBLOCK debug3: put_host_port: [<server2-ip>]:22222 debug3: load_hostkeys: loading entries for host "[<server2-ip>]:22222" from file "/home/server1_user/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/server1_user/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-ed25519,ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: setup hmac-md5-etm@openssh.com debug1: kex: server->client aes128-ctr hmac-md5-etm@openssh.com none debug2: mac_setup: setup hmac-md5-etm@openssh.com debug1: kex: client->server aes128-ctr hmac-md5-etm@openssh.com none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 01:73:fc:4f:42:75:8e:94:b5:cd:6b:83:cf:e7:2b:e1 debug3: put_host_port: [<server2-ip>]:22222 debug3: put_host_port: [<server2-ip>]:22222 debug3: load_hostkeys: loading entries for host "[<server2-ip>]:22222" from file "/home/server1_user/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/server1_user/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "[<server2-ip>]:22222" from file "/home/server1_user/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/server1_user/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug1: Host '[<server2-ip>]:22222' is known and matches the ECDSA host key. debug1: Found key in /home/server1_user/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/server1_user/.ssh/id_unison (0x7fb6888f3e20), explicit debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/server1_user/.ssh/id_unison debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 279 debug2: input_userauth_pk_ok: fp d0:87:3c:ae:77:cb:42:7d:4a:44:3b:db:cc:9e:cd:c5 debug3: sign_and_send_pubkey: RSA d0:87:3c:ae:77:cb:42:7d:4a:44:3b:db:cc:9e:cd:c5 debug1: key_parse_private2: missing begin marker debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to <server2-ip> ([<server2-ip>]:22222). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting no-more-sessions@openssh.com debug1: Entering interactive session. debug2: callback start debug2: fd 3 setting TCP_NODELAY debug3: packet_set_tos: set IP_TOS 0x10 debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env XDG_SESSION_ID debug3: Ignored env rvm_bin_path debug3: Ignored env GEM_HOME debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env IRBRC debug3: Ignored env SSH_CLIENT debug3: Ignored env OLDPWD debug3: Ignored env MY_RUBY_HOME debug3: Ignored env SSH_TTY debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env _system_type debug3: Ignored env rvm_path debug3: Ignored env rvm_prefix debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env _system_arch debug3: Ignored env _system_version debug3: Ignored env rvm_version debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env LANGUAGE debug3: Ignored env LOGNAME debug3: Ignored env GEM_PATH debug3: Ignored env SSH_CONNECTION debug3: Ignored env LESSOPEN debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env rvm_recommended_ruby debug3: Ignored env LESSCLOSE debug3: Ignored env RUBY_VERSION debug3: Ignored env _system_name debug3: Ignored env rvm_debug debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.13.0-36-generic x86_64) * Documentation: https://help.ubuntu.com/ Last login: Fri Apr 10 12:28:58 2015 from <server1-ip> unison@server2:~$ Help is greatly appreciated.
With ubuntu 14.04; does anyone know why <^>/run/systemd/was-enabled<^> does not exist and is expected? Thanks ... Richard ``` sudo apt-get install uwsgi [sudo] password for admin: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libjansson4 libmatheval1 libpgm-5.1-0 libsodium13 libzmq3 uwsgi-core Suggested packages: nginx-full cherokee libapache2-mod-proxy-uwsgi libapache2-mod-uwsgi libapache2-mod-ruwsgi uwsgi-plugins-all uwsgi-extra The following NEW packages will be installed: libjansson4 libmatheval1 libpgm-5.1-0 libsodium13 libzmq3 uwsgi uwsgi-core 0 upgraded, 7 newly installed, 0 to remove and 3 not upgraded. 4 not fully installed or removed. Need to get 949 kB of archives. After this operation, 3,126 kB of additional disk space will be used. Do you want to continue? [Y/n] Y Get:1 http://mirrors.digitalocean.com/ubuntu/ vivid/main libjansson4 amd64 2.7-1ubuntu1 [27.3 kB] Get:2 http://mirrors.digitalocean.com/ubuntu/ vivid/universe libmatheval1 amd64 1.1.11+dfsg-2 [21.2 kB] Get:3 http://mirrors.digitalocean.com/ubuntu/ vivid/universe libpgm-5.1-0 amd64 5.1.118-1~dfsg-2ubuntu1 [158 kB] Get:4 http://mirrors.digitalocean.com/ubuntu/ vivid/universe libsodium13 amd64 1.0.1-1 [134 kB] Get:5 http://mirrors.digitalocean.com/ubuntu/ vivid-updates/universe libzmq3 amd64 4.0.5+dfsg-2+deb8u1build0.15.04.1 [140 kB] Get:6 http://mirrors.digitalocean.com/ubuntu/ vivid/universe uwsgi-core amd64 2.0.7-1ubuntu2 [454 kB] Get:7 http://mirrors.digitalocean.com/ubuntu/ vivid/universe uwsgi amd64 2.0.7-1ubuntu2 [14.9 kB] Fetched 949 kB in 0s (1,434 kB/s) Setting up systemd (219-7ubuntu6) ... /var/lib/dpkg/info/systemd.postinst: 133: /var/lib/dpkg/info/systemd.postinst: cannot open /run/systemd/was-enabled: No such file Failed to try-restart systemd-logind.service: Connection timed out Failed to try-restart systemd-networkd.service: Connection timed out Failed to try-restart systemd-resolved.service: Connection timed out Failed to try-restart systemd-timesyncd.service: Connection timed out Selecting previously unselected package libjansson4:amd64. (Reading database ... 97191 files and directories currently installed.) Preparing to unpack .../libjansson4_2.7-1ubuntu1_amd64.deb ... ```
I accidentally typed root@xxxxx:/var/www/html/xxxxx.com/listimages# sudo chown -R www-data:www-data /. How do I restore the file permission? I got this error whenever I try to use sudo --- sudo: error in /etc/sudo.conf, line 0 while loading plugin `sudoers_policy' sudo: /usr/lib/sudo/sudoers.so must be owned by uid 0 sudo: fatal error, unable to load plugins --- withou it I cant change owneship.