To get started, please visit: https://[droplet-ip]:8083/list/firewall/ (where
[droplet-ip] is the IPv4 IP of your Droplet).
From the firewall configuration page, please click on the
+ icon to create a new firewall rule and use the following details to populate form. We’re using port 2083 in this example, though you can use any port that isn’t already in use.
Action: Accept Protocol: TCP Port: 2083 IP Address: 0.0.0.0/0
Click Save to add the rule to the firewall.
Once the firewall rule has been added, we’ll need to edit the NGINX configuration for VestaCP. Please login via SSH and navigate to
We’ll need to edit the
nginx.conf file and change the port that NGINX listens on from 8083 to 2083 (or the port you chose to use).
Once the port has been changed, press
CTRL+X, followed by
y, and then hit enter to save your changes.
Now that we have an active firewall rule allowing us to accept connections on the new port and we’ve made the changes required to allow NGINX to listen on the new port, we’ll restart VestaCP to allow the changes to take effect:
service vesta restart
The final step is removing the firewall entry for the previous port we were using. To do this, we’ll visit https://[droplet-ip]:2083/list/firewall/ (notice, we’re using the new port in the URL now).
Hover over the firewall entry that shows
8083 and click on Delete, then OK. You’re done!
These answers are provided by our Community. If you find them useful, show some love by clicking the heart. If you run into issues leave a comment, or add your own answer to help others.
Click below to sign up and get $100 of credit to try our products over 60 days!