Related

PHP Error Log: authz_core:error - For files that don't exists on my server Question Question
blocked ip in spam Question Question

Question

How to attach Block Storage when Droplet connected to ServerPilot?

Posted May 25, 2017 4.6k views
WordPressUbuntu 16.04Block Storage

Hello, Guys. I’m stuck in little problem.
I have a Droplet which is connected to ServerPilot. I use WordPress on that Droplet, my question how to attach a Block Storage when I’m connected to ServerPilot?

I read this Tutorial, But I think something different in ServerPilot. So, I asked them & they told me I have to mount the Block Storage in /srv you can check the full ScreenShot Here.

I don’t have a single knowledge in Linux, that is why I use DigitalOcean & ServerPilot for easy maintenance.

Did any of guys happen to using Block Storage when you’re using ServerPilot? Could you help me by giving me step by step tutorial?
Remember, I use only WordPress, so I wants to mount or attach the Block Storage in such way, that I won’t have any issue while uploading Images or Attachments in my WordPress Library.

Thank you.

Add a comment
By:
Dibbyo457

Related

PHP Error Log: authz_core:error - For files that don't exists on my server Question Question
blocked ip in spam Question Question
Add a comment
2 comments

These answers are provided by our Community. If you find them useful, show some love by clicking the heart. If you run into issues leave a comment, or add your own answer to help others.

×
3 answers
jtittle1 May 25, 2017

@Dibbyo457

Once you deploy a new Droplet with a Volume, first click on the name of the Droplet and then, from the left side menu, click on Volumes.

You’ll then want to click on More, then Config instructions. A pop up will be presented with the configuration commands that you need to run in order to mount the volume persistently.

Those commands will be something like:

sudo mkfs.ext4 -F /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01

and

sudo mkdir -p /mnt/volume-nyc1-01; sudo mount -o discard,defaults /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01 /mnt/volume-nyc1-01; echo /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01 /mnt/volume-nyc1-01 ext4 defaults,nofail,discard 0 0 | sudo tee -a /etc/fstab

Which, broken down in to multiple commands, looks like:

sudo mkdir -p /mnt/volume-nyc1-01

sudo mount -o discard,defaults /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01 /mnt/volume-nyc1-01

echo /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01 /mnt/volume-nyc1-01 ext4 defaults,nofail,discard 0 0 | sudo tee -a /etc/fstab

Since ServerPilot is recommending that you mount to /srv, you’ll need to modify those commands and remove the mkdir commands, as they aren’t needed.

Keep in mind, this is an example. You’re volume may be named different, so you need to replace the name of the volume in this example with the name of the volume that’s created for you.

So what we’d end up with us a set of commands like this:

Formate and Prepare the Volume

sudo mkfs.ext4 -F /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01

Mount the Volume to /srv

sudo mount -o discard,defaults /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01 /srv

Create the /etc/fstab Entry for Persistence

echo /dev/disk/by-id/scsi-0DO_Volume_volume-nyc1-01 /srv ext4 defaults,nofail,discard 0 0 | sudo tee -a /etc/fstab

The part in the commands above that you will probably need to replace is

scsi-0DO_Volume_volume-nyc1-01

Once the above commands are ran, you’ll all done and can then connect the new Droplet to SP.

Reply Report
  • Dibbyo457 May 25, 2017

    @jtittle
    Hi, thank you so much for taking the time and giving me step by step tutorial. But I’m still confused. As you wrote, “Once the above commands are ran, you’ll all done and can then connect the new Droplet to SP.”
    Then connect to SP see that’s part that really confusing me. My droplet is already connected to SP.
    So, I won’t be able to attach a BS if my droplet already connected to SP?
    Could you please collaborate a little here?
    Thank you.

    Reply Report
    • jtittle1 May 25, 2017

      @Dibbyo457

      You can attach a volume to a current Droplet, though in that ticket, they are recommending that you create a new Droplet with a volume and, from what I can understand (even though it’s not stated), migrate your data over.

      If you intend on deploying a volume to an existing Droplet, you’d need to backup all data that resides in /srv and verify it, delete the existing data, mount the volume (using the commands I provided, and changing the volume name as it applies to yours), and then restore the data from the backup.

      You would then need to go through and ensure that all permissions on all directories and files match what they were, and what they need to be in order for you to manage your site through ServerPilot.

      The above is most likely why they are recommending that you create a new Droplet and attach a volume to it, then migrate data over to it. Incorrect permissions can be problematic and cause numerous issues. Although somewhat easy to fix, we have no real indication of how ServerPilot sets up a server, so they may be doing something on the backend that may differ from what I might recommend doing – that alone could prevent you from using their service on the front end.

      Reply Report
  • blakemiller January 27, 2019

    Hello! This thread is old, but I am trying to do the exact same thing.

    I am trying to use a DO server that has a block storage volume attached to it. The server is a 50Gb Droplet. The volume is a 100Gb volume.

    I am following the directions above BEFORE attaching the server in Server Pilot.

    After following those, I proceed to connect/setup the server in SP. It successfully installs, but I still cannot see the additional storage space on the server - it’s still showing the original 50Gb as if nothing changed in regards to the Volume. If properly mounted, I assume it should show the full 150Gb, correct?

    Reply Report
Archie22is November 12, 2017

Thank you @Dibbyo457

Reply Report
jplathigara January 15, 2018

I just run this command and i lost my all data from /srv/ folder

sudo mount -o discard,defaults /dev/disk/by-id/scsi-0DOVolumevolume-nyc1-01 /srv

I just use my volume and run this cmd and create lost+found folder in /srv folder

Please help me to get all data back.

Reply Report
Submit an Answer

Related

Looking for something else?

Ask a new question Search for more help