Tutorial

How To Install MySQL on Ubuntu 22.04

How To Install MySQL on Ubuntu 22.04
Not using Ubuntu 22.04?Choose a different version or distribution.
Ubuntu 22.04

Introduction

MySQL is an open-source database management system, commonly installed as part of the popular LAMP (Linux, Apache, MySQL, PHP/Python/Perl) stack. It implements the relational model and uses Structured Query Language (better known as SQL) to manage its data.

This tutorial will go over how to install MySQL version 8.0 on an Ubuntu 22.04 server. By completing it, you will have a working relational database that you can use to build your next website or application.

1-click deploy a MySQL database using DigitalOcean Managed Databases. Let DigitalOcean focus on scaling, maintenance, and upgrades for your database.

Prerequisites

To follow this tutorial, you will need:

Step 1 — Installing MySQL

On Ubuntu 22.04, you can install MySQL using the APT package repository. At the time of this writing, the version of MySQL available in the default Ubuntu repository is version 8.0.28.

To install it, update the package index on your server if you’ve not done so recently:

  1. sudo apt update

Then install the mysql-server package:

  1. sudo apt install mysql-server

Ensure that the server is running using the systemctl start command:

  1. sudo systemctl start mysql.service

These commands will install and start MySQL, but will not prompt you to set a password or make any other configuration changes. Because this leaves your installation of MySQL insecure, we will address this next.

Step 2 — Configuring MySQL

For fresh installations of MySQL, you’ll want to run the database management system’s included security script. This script changes some of the less secure default options for things like disallowing remote root logins and removing sample users.

Warning: As of July 2022, an error will occur when you run the mysql_secure_installation script without some further configuration. The reason is that this script will attempt to set a password for the installation’s root MySQL account but, by default on Ubuntu installations, this account is not configured to connect using a password.

Prior to July 2022, this script would silently fail after attempting to set the root account password and continue on with the rest of the prompts. However, as of this writing the script will return the following error after you enter and confirm a password:

Output
... Failed! Error: SET PASSWORD has no significance for user 'root'@'localhost' as the authentication method used doesn't store authentication data in the MySQL server. Please consider using ALTER USER instead if you want to change authentication parameters. New password:

This will lead the script into a recursive loop which you can only get out of by closing your terminal window.

Because the mysql_secure_installation script performs a number of other actions that are useful for keeping your MySQL installation secure, it’s still recommended that you run it before you begin using MySQL to manage your data. To avoid entering this recursive loop, though, you’ll need to first adjust how your root MySQL user authenticates.

First, open up the MySQL prompt:

  1. sudo mysql

Then run the following ALTER USER command to change the root user’s authentication method to one that uses a password. The following example changes the authentication method to mysql_native_password:

  1. ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';

After making this change, exit the MySQL prompt:

  1. exit

Following that, you can run the mysql_secure_installation script without issue.

Run the security script with sudo:

  1. sudo mysql_secure_installation

This will take you through a series of prompts where you can make some changes to your MySQL installation’s security options. The first prompt will ask whether you’d like to set up the Validate Password Plugin, which can be used to test the password strength of new MySQL users before deeming them valid.

If you elect to set up the Validate Password Plugin, any MySQL user you create that authenticates with a password will be required to have a password that satisfies the policy you select:

Output
Securing the MySQL server deployment. Connecting to MySQL using a blank password. VALIDATE PASSWORD COMPONENT can be used to test passwords and improve security. It checks the strength of password and allows the users to set only those passwords which are secure enough. Would you like to setup VALIDATE PASSWORD component? Press y|Y for Yes, any other key for No: Y There are three levels of password validation policy: LOW Length >= 8 MEDIUM Length >= 8, numeric, mixed case, and special characters STRONG Length >= 8, numeric, mixed case, special characters and dictionary file Please enter 0 = LOW, 1 = MEDIUM and 2 = STRONG: 2

Regardless of whether you choose to set up the Validate Password Plugin, the next prompt will be to set a password for the MySQL root user. Enter and then confirm a secure password of your choice:

Output
Please set the password for root here. New password: Re-enter new password:

Note that even though you’ve set a password for the root MySQL user, this user is not currently configured to authenticate with a password when connecting to the MySQL shell.

If you used the Validate Password Plugin, you’ll receive feedback on the strength of your new password. Then the script will ask if you want to continue with the password you just entered or if you want to enter a new one. Assuming you’re satisfied with the strength of the password you just entered, enter Y to continue the script:

Output
Estimated strength of the password: 100 Do you wish to continue with the password provided?(Press y|Y for Yes, any other key for No) : Y

From there, you can press Y and then ENTER to accept the defaults for all the subsequent questions. This will remove some anonymous users and the test database, disable remote root logins, and load these new rules so that MySQL immediately respects the changes you have made.

Note: Once the security script completes, you can then reopen MySQL and change the root user’s authentication method back to the default, auth_socket. To authenticate as the root MySQL user using a password, run this command:

  1. mysql -u root -p

Then go back to using the default authentication method using this command:

  1. ALTER USER 'root'@'localhost' IDENTIFIED WITH auth_socket;

This will mean that you can once again connect to MySQL as your root user using the sudo mysql command.

Once the script completes, your MySQL installation will be secured. You can now move on to creating a dedicated database user with the MySQL client.

Step 3 — Creating a Dedicated MySQL User and Granting Privileges

Upon installation, MySQL creates a root user account which you can use to manage your database. This user has full privileges over the MySQL server, meaning it has complete control over every database, table, user, and so on. Because of this, it’s best to avoid using this account outside of administrative functions. This step outlines how to use the root MySQL user to create a new user account and grant it privileges.

In Ubuntu systems running MySQL 5.7 (and later versions), the root MySQL user is set to authenticate using the auth_socket plugin by default rather than with a password. This plugin requires that the name of the operating system user that invokes the MySQL client matches the name of the MySQL user specified in the command, so you must invoke mysql with sudo privileges to gain access to the root MySQL user:

  1. sudo mysql

Note: If you installed MySQL with another tutorial and enabled password authentication for root, you will need to use a different command to access the MySQL shell. The following will run your MySQL client with regular user privileges, and you will only gain administrator privileges within the database by authenticating:

  1. mysql -u root -p

Once you have access to the MySQL prompt, you can create a new user with a CREATE USER statement. These follow this general syntax:

  1. CREATE USER 'username'@'host' IDENTIFIED WITH authentication_plugin BY 'password';

After CREATE USER, you specify a username. This is immediately followed by an @ sign and then the hostname from which this user will connect. If you only plan to access this user locally from your Ubuntu server, you can specify localhost. Wrapping both the username and host in single quotes isn’t always necessary, but doing so can help to prevent errors.

You have several options when it comes to choosing your user’s authentication plugin. The auth_socket plugin mentioned previously can be convenient, as it provides strong security without requiring valid users to enter a password to access the database. But it also prevents remote connections, which can complicate things when external programs need to interact with MySQL.

As an alternative, you can leave out the WITH authentication_plugin portion of the syntax entirely to have the user authenticate with MySQL’s default plugin, caching_sha2_password. The MySQL documentation recommends this plugin for users who want to log in with a password due to its strong security features.

Run the following command to create a user that authenticates with caching_sha2_password. Be sure to change sammy to your preferred username and password to a strong password of your choosing:

  1. CREATE USER 'sammy'@'localhost' IDENTIFIED BY 'password';

Note: There is a known issue with some versions of PHP that causes problems with caching_sha2_password. If you plan to use this database with a PHP application — phpMyAdmin, for example — you may want to create a user that will authenticate with the older, though still secure, mysql_native_password plugin instead:

  1. CREATE USER 'sammy'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';

If you aren’t sure, you can always create a user that authenticates with caching_sha2_plugin and then ALTER it later on with this command:

  1. ALTER USER 'sammy'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';

After creating your new user, you can grant them the appropriate privileges. The general syntax for granting user privileges is as follows:

  1. GRANT PRIVILEGE ON database.table TO 'username'@'host';

The PRIVILEGE value in this example syntax defines what actions the user is allowed to perform on the specified database and table. You can grant multiple privileges to the same user in one command by separating each with a comma. You can also grant a user privileges globally by entering asterisks (*) in place of the database and table names. In SQL, asterisks are special characters used to represent “all” databases or tables.

To illustrate, the following command grants a user global privileges to CREATE, ALTER, and DROP databases, tables, and users, as well as the power to INSERT, UPDATE, and DELETE data from any table on the server. It also grants the user the ability to query data with SELECT, create foreign keys with the REFERENCES keyword, and perform FLUSH operations with the RELOAD privilege. However, you should only grant users the permissions they need, so feel free to adjust your own user’s privileges as necessary.

You can find the full list of available privileges in the official MySQL documentation.

Run this GRANT statement, replacing sammy with your own MySQL user’s name, to grant these privileges to your user:

  1. GRANT CREATE, ALTER, DROP, INSERT, UPDATE, INDEX, DELETE, SELECT, REFERENCES, RELOAD on *.* TO 'sammy'@'localhost' WITH GRANT OPTION;

Note that this statement also includes WITH GRANT OPTION. This will allow your MySQL user to grant any permissions that it has to other users on the system.

Warning: Some users may want to grant their MySQL user the ALL PRIVILEGES privilege, which will provide them with broad superuser privileges akin to the root user’s privileges, like so:

  1. GRANT ALL PRIVILEGES ON *.* TO 'sammy'@'localhost' WITH GRANT OPTION;

Such broad privileges should not be granted lightly, as anyone with access to this MySQL user will have complete control over every database on the server.

Following this, it’s good practice to run the FLUSH PRIVILEGES command. This will free up any memory that the server cached as a result of the preceding CREATE USER and GRANT statements:

  1. FLUSH PRIVILEGES;

Then you can exit the MySQL client:

  1. exit

In the future, to log in as your new MySQL user, you’d use a command like the following:

  1. mysql -u sammy -p

The -p flag will cause the MySQL client to prompt you for your MySQL user’s password in order to authenticate.

Finally, let’s test the MySQL installation.

Step 4 — Testing MySQL

Regardless of how you installed it, MySQL should have started running automatically. To test this, check its status.

  1. systemctl status mysql.service

The output will be similar to the following:

Output
● mysql.service - MySQL Community Server Loaded: loaded (/lib/systemd/system/mysql.service; enabled; vendor preset: enabled) Active: active (running) since Mon 2022-04-11 16:04:39 UTC; 2h 36min ago Process: 2593 ExecStartPre=/usr/share/mysql/mysql-systemd-start pre (code=exited, status=0/SUCCESS) Main PID: 2601 (mysqld) Status: "Server is operational" Tasks: 38 (limit: 1119) Memory: 354.3M CPU: 19.944s CGroup: /system.slice/mysql.service └─2601 /usr/sbin/mysqld

If MySQL isn’t running, you can start it with sudo systemctl start mysql.

For an additional check, you can try connecting to the database using the mysqladmin tool, which is a client that lets you run administrative commands. For example, this command says to connect as a MySQL user named sammy (-u sammy), prompt for a password (-p), and return the version. Be sure to change sammy to the name of your dedicated MySQL user, and enter that user’s password when prompted:

  1. sudo mysqladmin -p -u sammy version

Below is an example of the output:

Output
mysqladmin Ver 8.0.28-0ubuntu4 for Linux on x86_64 ((Ubuntu)) Copyright (c) 2000, 2022, Oracle and/or its affiliates. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Server version 8.0.28-0ubuntu4 Protocol version 10 Connection Localhost via UNIX socket UNIX socket /var/run/mysqld/mysqld.sock Uptime: 2 hours 31 min 57 sec Threads: 2 Questions: 25 Slow queries: 0 Opens: 160 Flush tables: 3 Open tables: 79 Queries per second avg: 0.000

This means MySQL is up and running.

Conclusion

You now have a basic MySQL setup installed on your server. Here are a few examples of next steps you can take:

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors
Default avatar

staff technical writer

hi! i write do.co/docs now, but i used to be the senior tech editor publishing tutorials here in the community.


Default avatar

Manager, Developer Education

Technical Writer @ DigitalOcean


Default avatar
Kong Yang

author


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

I have just spent about 12 hours getting the mysqli_connect error:

Access denied for user ‘root’@‘localhost’

I finally by luck realised that the problem was this line of code:

GRANT ALL PRIVILEGES ON .

This apparently does not work. At least for me anyway. I had to do:

GRANT ALL PRIVILEGES ON DATABASE_NAME.* TO ‘root’@‘localhost’;

Only then could I connect. (Is this a bug in mysql ?)

In step 2 the “ALTER RULE…WITH auth_socket” command must be placed after the “sudo mysql_secure_installation”. Otherwise you get the same ERROR: SET PASSWORD …!

This comment has been deleted

    I am unable to open up airflow webserver after following this guide and am getting 'myuserame@LAPTOP-28BMMQV7:/root$ cd airflow/' bash: cd: airflow/: Permission denied. and myusername@LAPTOP-28BMMQV7:/root$ airflow webserver -p 8080 Error: [Errno 13] Permission denied: '/root'.

    can someone help me? https://askubuntu.com/questions/1441722/permissions-problem-in-ubuntu-when-accessing-airflow-webserver-as-root-and-non-r

    Your article does not work for MySQL 8. You have an error in article. instead of your show example GRANT PRIVILEGE ... line. it should be like this: https://stackoverflow.com/a/50197630/2377343

    also, please add/mention an example of adding database like: CREATE DATABASE testdb1; and assigning privileges only to that database for particular mysql user.

    Very good Congratulations

    This comment has been deleted

      This comment has been deleted

        It should be mentioned that you have to have at least 1GB RAM on your droplet.

        very helpful guys. saved my buns with this one!! thank you.

        Try DigitalOcean for free

        Click below to sign up and get $200 of credit to try our products over 60 days!

        Sign up

        Join the Tech Talk
        Success! Thank you! Please check your email for further details.

        Please complete your information!

        Get our biweekly newsletter

        Sign up for Infrastructure as a Newsletter.

        Hollie's Hub for Good

        Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

        Become a contributor

        Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

        Welcome to the developer cloud

        DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

        Learn more
        DigitalOcean Cloud Control Panel