A question can only have one accepted answer. Are you sure you want to replace the current answer with this one?
You previously marked this answer as accepted. Are you sure you want to unaccept it?
By using Cloudflare CDN means I can’t use my own SSL certificate without spending a whole lot money on it.
So I have to use Cloudflare shared SSL Certificate, will it ruin SEO rating?
Hello,
I would suggest using CloudFlare if your website visitors are spread across the globe. If you are getting traffic mostly from the same region then it might not be worthed.
I don’t think that this could affect your SEO.
Regards,
Bobby
Hello, I need to set some headers to all urls with certain scheme ie: http://domain.com/teenager-kills-abusive-stepfather/66585/ so i can read it something like this `http://domain.com/*/*/` i have an if (I know if is evil) like this one: ``` if ($uri ~ "/php-fpm-status/") { set $bypass "true"; add_header Something "value"; } ``` but in this case i need something like this: ``` if ($uri ~ "/*/*/") { set $bypass "true"; add_header Something "value"; } ``` I really suck on regular expressions, so any help would be nice. or maybe a regular expressions dummy to regular tool/convertor link :D
Hello, i know there are tons of articles around the web for such topic, but i really dont like to tune my server just with given figures without understanding it. also i highly rely on this community as most of all guides are very details. also thanks to @jtittle & @hansen for their excellent support. basically my server has separate web server & database server (both are 1gb each) and i also have 2 pools, 1 for my main site/community(wordpress), another for my application(codeigniter) which is on a sub-domain. the application is going to be using most of the resources i assume (even though its on codeigniter framework which is already very lightweight), as main site is not that large, and on top of that its fastcgi enabled. so what should be the pools configuration for my setup? till now i didnt changed the default value, so both pools are running on the same value. but after googling a lot, i think this could be a good setting for my 2 php pools. For Both site ``` emergency_restart_threshold 10 emergency_restart_interval 1m process_control_timeout 10s ``` Main site ``` pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 3 pm.max_requests = 300 request_slowlog_timeout = 5s slowlog = /var/log/php/7.0/fpm/slowlog-site.log ``` PHP Application ``` pm = dynamic pm.max_children = 10 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 4 pm.max_requests = 500 request_slowlog_timeout = 5s slowlog = /var/log/php/7.0/fpm/slowlog-app.log ``` Please reply here your recommendation guy's. thanks in advance.
Hi everyone, I could use a little advise regarding running multiple Wordpress sites on a single server, as multiple users, and making sure the webserver has the proper permissions to make changes while making sure security is in order. *What I like to achieve...* A configuration in which I can use a user per website, and where the webserver can make changes (i.e. uploading media, plugins, etc), without relying on chmod (not having to use chmod at all feels better). Where the user can make changes to it's directory (e.g. a git working directory for automatic deployments). When the users can't change each other files. *I wonder...* Is the configuration described below a proper one? Should I do something differently? Are there better solutions? *Some backstory...* For a while now I have been setting up servers for websites and web apps. Most of the time I run multiple websites from the same server. Could be a staging and production environment, but also different (client) websites. Sometimes I add CI to the mix using CircleCI. Basically CircleCI pushes to a repository on the server, this repo then updates the working directory which could be a web app or Wordpress theme. Everything currently works okay, although I think security, and how things are set up, could be improved. Currently my configuration often looks like... **Users** ``` somewebsite # User on the server with the directory `/var/www/somewebsite` someotherwebsite # Another user on the server with the directory `/var/www/someotherwebsite` ``` When needed I use these users to make changes to the contents. **Directories** ``` /var/www/somewebsite/html # Wordpress website /var/www/somewebsite/somewebsite.git # Git repo with a working dir set to `/var/www/somewebsite/html/wp-content/themes/sometheme` /var/www/someotherwebsite/html # Some other website /var/www/yetanotherwebsite/html # Yet another Wordpress website ``` **Permissions** The contents of `/var/www/somewebsite/html`, `/var/www/someotherwebsite/html`, and `/var/www/yetanotherwebsite/html` belong to the user and group `www-data`. Although, when I would upload something manually later, this upload (logically) belongs to the user I am using for access (not `www-data`). The users `somewebsite`, `someotherwebsite`, and `yetanotherwebsite` have been added to the `www-data` group. I believe this means `someotherwebsite` could make changes to `somewebsite` (and vice versa). Which would be better if it couldn't. **Trivia** * Depending on the requirements I use Apache or nginx. * SSH keys are used for authentication, Password Authentication is disabled. I understand my current configuration isn't the most straightforward one. I do hope I clarified the most of it. I read a lot of information regarding the subject. But It's hard to find something which is applicable to my situation. This tutorial was very useful https://www.digitalocean.com/community/tutorials/how-to-set-up-multiple-wordpress-sites-on-a-single-ubuntu-vps. Any tips, feedback and insights are welcome!
Hello: I am trying to deploy my rails app on Ubuntu 16.04 adapting this [tutorial](https://www.digitalocean.com/community/tutorials/deploying-a-rails-app-on-ubuntu-14-04-with-capistrano-nginx-and-puma). I have gone through all the steps and when I visit the IP address I get "unable to connect, Firefox can’t establish a connection to the server at IP address" I have checked my logs and none of them show any sign of errors: nginx.access.log ``` 41.82.2.246 - - [20/Mar/2017:13:26:04 +0000] "GET / HTTP/1.1" 301 5 "-" "Mozilla/5.0 (Macintosh; Intel M$ 51.36.233.18 - - [20/Mar/2017:13:29:22 +0000] "\xC1\x99[\xB21\xA9\x92" 400 182 "-" "-" 51.36.233.18 - - [20/Mar/2017:13:29:23 +0000] "\xDEzx\xFC\x0C\xC6\x8D\xD3\xD9\x1A\xE1\x1F\xC4\xD0\xF0/\x$ 51.36.233.18 - - [20/Mar/2017:13:29:23 +0000] "\xA5\xA8\xBCq\x16\xA6\xEC\xC2\xF7\x0Fz\xEAn\x83\xD92xu\xB$ ``` nginx.error.log ``` [info] 3003#3003: *3 client sent invalid method while reading client request line, c$ [info] 3003#3003: *4 client sent invalid method while reading client request line, c$ [info] 3003#3003: *5 client sent invalid method while reading client request line, c$ [info] 3003#3003: *6 client closed connection while waiting for request, client: 41.$ ``` puma.error.log ``` * Listening on unix:///home/deploy/apps/appname/shared/tmp/sockets/appname-puma.sock ``` puma.access.log ``` === puma startup: 2017-03-20 13:24:07 +0000 === ``` production.log - shows migrations, last lines are ``` I, [2017-03-20T13:24:03.303477 #2436] INFO -- : Migrating to AddGuidToPrescriptions (20170310185442) D, [2017-03-20T13:24:03.304288 #2436] DEBUG -- : ^[[1m^[[35m (0.1ms)^[[0m ^[[1m^[[35mBEGIN^[[0m D, [2017-03-20T13:24:03.305111 #2436] DEBUG -- : ^[[1m^[[35m (0.3ms)^[[0m ^[[1m^[[35mALTER TABLE "pre$ D, [2017-03-20T13:24:03.306443 #2436] DEBUG -- : ^[[1m^[[35mSQL (0.3ms)^[[0m ^[[1m^[[32mINSERT INTO "$ D, [2017-03-20T13:24:03.307318 #2436] DEBUG -- : ^[[1m^[[35m (0.6ms)^[[0m ^[[1m^[[35mCOMMIT^[[0m D, [2017-03-20T13:24:03.310861 #2436] DEBUG -- : ^[[1m^[[36mActiveRecord::InternalMetadata Load (0.3ms$ D, [2017-03-20T13:24:03.317530 #2436] DEBUG -- : ^[[1m^[[35m (0.2ms)^[[0m ^[[1m^[[35mBEGIN^[[0m D, [2017-03-20T13:24:03.319872 #2436] DEBUG -- : ^[[1m^[[35mSQL (0.7ms)^[[0m ^[[1m^[[32mINSERT INTO "$ D, [2017-03-20T13:24:03.322738 #2436] DEBUG -- : ^[[1m^[[35m (2.5ms)^[[0m ^[[1m^[[35mCOMMIT^[[0m D, [2017-03-20T13:24:03.323393 #2436] DEBUG -- : ^[[1m^[[35m (0.4ms)^[[0m ^[[1m^[[34mSELECT pg_adviso$ ``` All input and help welcome thanks!