Use my droplets for Built Android ROM
Hi DO Community,
I have some questions here, for clear and not breaking rules on DO.
Can I use my droplets for Built Android ROM?
Thanks before
Sign In to Comment
1 Answer
You can use your droplets for anything that is legal, so if you’re not breaking any laws or copyrights, then yes. There’s a couple of “no thanks, use another service”, which is true for porno websites and hate speech.
Have another answer? Share your knowledge.
Related
-
question
How do I make my application visible on the web
And now I have the following situation, First I do not see any errors, because the commands "sudo nginx -t" and "python3 manage.py runserver localhost: 9000" run well for me and now while running this last command I can access my application that is hosted in "django_project" without No change using the django_project skeleton and just re-editing the necessary ".py" as urls.py, views.py and add the "html" files of my application. EVERYTHING ALRIGHT HERE. If I give "Control-C", then I can not access my application and send me the error bad 502, but I think this is the right thing, because I am accessing through the test server. But according to the documentation I made several changes in nginx and gunicorn, which do not produce any effect, because when access by the name of my domain "www.xxxxxxxxxxx.cxx" I continue releasing the page html index.html that is hosted in var / www /xxxxxxxxxxxxxxxxx.cxx / html and is not redirected to my application. As I mentioned, I followed all the steps of the documentation sent to me. Please, to achieve success with this, you can give me some additional recommendation. ? To make and work
-
question
Is there a way to copy my droplet so I can boot into it from vagrant?
Hi I use Vagrant for local development before pushing to a heroku dyno currently - they good thing about this is that my vagrant vm is setup very similar to standard heroku dyno's Is there a way to do this with OD? Preferably, I'd like to be able to setup a droplet for RoR how I like, then save it and use it locally in VM in vagrant for testing, before pushing to droplet Thanks
-
question
Help required setting up Maven installation on Ubuntu
I am trying to install Maven on my Droplet. I have done my diligence on the user forum here and on the internet, but since this might be a Droplet specific question, I am on here, asking people if they can advise me So, I am trying to install Maven I issued the following command: sudo apt-get install maven However, it wants over 150 MB of additional disk space. There is a whole lot of stuff it wants to bring in. Is that necessary. I have copied over the output of the apt-get command Is there a better command or a way to avoid getting in so much stuff. Please advise. Many thanks for your time. evan@ubuntu-2gb-nyc3-01:~$ **sudo apt-get install maven** [sudo] password for evan: Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: grub-pc-bin Use 'sudo apt autoremove' to remove it. The following additional packages will be installed: ant ant-optional ca-certificates-java default-jre-headless fontconfig-config fonts-dejavu-core java-common junit junit4 libaopalliance-java libapache-pom-java libasm4-java libatinject-jsr330-api-java libavahi-client3 libavahi-common-data libavahi-common3 libbsh-java libcdi-api-java libcglib3-java libclassworlds-java libcommons-cli-java libcommons-codec-java libcommons-httpclient-java libcommons-io-java libcommons-lang-java libcommons-lang3-java libcommons-logging-java libcommons-net-java libcommons-net2-java libcommons-parent-java libcups2 libdom4j-java libdoxia-core-java libeasymock-java libeclipse-aether-java libfontconfig1 libgeronimo-interceptor-3.0-spec-java libguava-java libguice-java libhamcrest-java libhttpclient-java libhttpcore-java libjaxen-java libjaxp1.3-java libjdom1-java libjetty-java libjpeg-turbo8 libjpeg8 libjsch-java libjsoup-java libjsr305-java liblcms2-2 liblog4j1.2-java libmaven-parent-java libmaven2-core-java libmaven3-core-java libnspr4 libnss3 libnss3-nssdb libobjenesis-java libpcsclite1 libplexus-ant-factory-java libplexus-archiver-java libplexus-bsh-factory-java libplexus-cipher-java libplexus-classworlds-java libplexus-classworlds2-java libplexus-cli-java libplexus-component-annotations-java libplexus-component-metadata-java libplexus-container-default-java libplexus-container-default1.5-java libplexus-containers-java libplexus-containers1.5-java libplexus-interactivity-api-java libplexus-interpolation-java libplexus-io-java libplexus-sec-dispatcher-java libplexus-utils-java libplexus-utils2-java libqdox2-java libservlet2.5-java libservlet3.1-java libsisu-inject-java libsisu-plexus-java libslf4j-java libwagon-java libwagon2-java libxalan2-java libxbean-java libxerces2-java libxi6 libxml-commons-external-java libxml-commons-resolver1.1-java libxom-java libxpp2-java libxpp3-java libxrender1 libxtst6 openjdk-8-jre-headless x11-common Suggested packages: ant-doc ant-gcj default-jdk | java-compiler | java-sdk ant-optional-gcj antlr javacc jython libbcel-java libbsf-java libgnumail-java libjdepend-java liboro-java libregexp-java default-jre junit-doc libaopalliance-java-doc libatinject-jsr330-api-java-doc libclassworlds-java-doc libcommons-httpclient-java-doc libcommons-io-java-doc libcommons-lang-java-doc libcommons-lang3-java-doc libavalon-framework-java libcommons-logging-java-doc libexcalibur-logkit-java libcommons-net-java-doc libcommons-net2-java-doc cups-common libdom4j-java-doc libeasymock-java-doc libcglib-java libjaxp1.3-java-gcj libjdom1-java-doc jetty libjetty-java-doc libjsoup-java-doc libjsr305-java-doc liblcms2-utils liblog4j1.2-java-doc libobjenesis-java-doc pcscd libplexus-cipher-java-doc libplexus-classworlds-java-doc libplexus-classworlds2-java-doc libplexus-cli-java-doc libplexus-container-default-java-doc libplexus-interactivity-api-java-doc libplexus-interpolation-java-doc libplexus-sec-dispatcher-java-doc libplexus-utils-java-doc libplexus-utils2-java-doc libqdox2-java-doc testng libwagon-java-doc libxalan2-java-doc libxsltc-java groovy2 libequinox-osgi-java libosgi-compendium-java libosgi-core-java libqdox-java libspring-beans-java libspring-context-java libspring-core-java libspring-web-java libxerces2-java-doc libxerces2-java-gcj libxml-commons-resolver1.1-java-doc libxom-java-doc openjdk-8-jre-jamvm libnss-mdns fonts-dejavu-extra fonts-ipafont-gothic fonts-ipafont-mincho fonts-wqy-microhei fonts-wqy-zenhei fonts-indic The following NEW packages will be installed: ant ant-optional ca-certificates-java default-jre-headless fontconfig-config fonts-dejavu-core java-common junit junit4 libaopalliance-java libapache-pom-java libasm4-java libatinject-jsr330-api-java libavahi-client3 libavahi-common-data libavahi-common3 libbsh-java libcdi-api-java libcglib3-java libclassworlds-java libcommons-cli-java libcommons-codec-java libcommons-httpclient-java libcommons-io-java libcommons-lang-java libcommons-lang3-java libcommons-logging-java libcommons-net-java libcommons-net2-java libcommons-parent-java libcups2 libdom4j-java libdoxia-core-java libeasymock-java libeclipse-aether-java libfontconfig1 libgeronimo-interceptor-3.0-spec-java libguava-java libguice-java libhamcrest-java libhttpclient-java libhttpcore-java libjaxen-java libjaxp1.3-java libjdom1-java libjetty-java libjpeg-turbo8 libjpeg8 libjsch-java libjsoup-java libjsr305-java liblcms2-2 liblog4j1.2-java libmaven-parent-java libmaven2-core-java libmaven3-core-java libnspr4 libnss3 libnss3-nssdb libobjenesis-java libpcsclite1 libplexus-ant-factory-java libplexus-archiver-java libplexus-bsh-factory-java libplexus-cipher-java libplexus-classworlds-java libplexus-classworlds2-java libplexus-cli-java libplexus-component-annotations-java libplexus-component-metadata-java libplexus-container-default-java libplexus-container-default1.5-java libplexus-containers-java libplexus-containers1.5-java libplexus-interactivity-api-java libplexus-interpolation-java libplexus-io-java libplexus-sec-dispatcher-java libplexus-utils-java libplexus-utils2-java libqdox2-java libservlet2.5-java libservlet3.1-java libsisu-inject-java libsisu-plexus-java libslf4j-java libwagon-java libwagon2-java libxalan2-java libxbean-java libxerces2-java libxi6 libxml-commons-external-java libxml-commons-resolver1.1-java libxom-java libxpp2-java libxpp3-java libxrender1 libxtst6 maven openjdk-8-jre-headless x11-common 0 upgraded, 102 newly installed, 0 to remove and 5 not upgraded. Need to get 58.1 MB of archives. After this operation, 1**50 MB of additional disk space will be used.**
-
question
Error following ML tutorial
Hi, I am following this tutorial: https://www.digitalocean.com/community/tutorials/how-to-perform-neural-style-transfer-with-python-3-and-pytorch#step-2-—-running-your-first-style-transfer-experiment I am having the same problem as posted in the comments. Originally, the images from this snippet pasted into Jupyter: content_image = Image('{}/images/content/venice-boat.jpg'.format(workingdir)) style_image = Image('{}/images/21styles/starry_night.jpg'.format(workingdir)) display(content_image) display(style_image) were not showing also, but I finally realised this was becasue the Jupyter notebook was created by user science, so home was different to root home, so I setup again in science home and I get the images etc working. However, when it comes to the point of trying the first style transfer, I get the rror posted in the comments. Here is is: --------------------------------------------------------------------------- CalledProcessError Traceback (most recent call last) in () 3 4 # run the command ----> 5 x = subprocess.check_output(cmd, universal_newlines=True) /usr/lib/python3.5/subprocess.py in check_output(timeout, *popenargs, **kwargs) 624 625 return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, --> 626 **kwargs).stdout 627 628 /usr/lib/python3.5/subprocess.py in run(input, timeout, check, *popenargs, **kwargs) 706 if check and retcode: 707 raise CalledProcessError(retcode, process.args, --> 708 output=stdout, stderr=stderr) 709 return CompletedProcess(process.args, retcode, stdout, stderr) 710 CalledProcessError: Command '['python3', '/home/science/style_transfer/PyTorch-Style-Transfer/experiments/main.py', 'eval', '--content-image', '/home/science/style_transfer/PyTorch-Style-Transfer/experiments/images/content/venice-boat.jpg', '--style-image', '/home/science/style_transfer/PyTorch-Style-Transfer/experiments/images/21styles/starry_night.jpg', '--model', '/home/science/style_transfer/PyTorch-Style-Transfer/experiments/models/21styles.model', '--output-image', '/home/science/style_transfer/PyTorch-Style-Transfer/experiments/test.jpg', '--cuda=0']' returned non-zero exit status 1