Tutorial

How To Create An Off-Site Backup Of Your Site With Rsync On Centos 6

Published on April 18, 2013
Default avatar

By zlađurić

How To Create An Off-Site Backup Of Your Site With Rsync On Centos 6

Status: Deprecated

This article covers a version of CentOS that is no longer supported. If you are currently operating a server running CentOS 6, we highly recommend upgrading or migrating to a supported version of CentOS.

Reason: CentOS 6 reached end of life (EOL) on November 30th, 2020 and no longer receives security patches or updates. For this reason, this guide is no longer maintained.

See Instead:
This guide might still be useful as a reference, but may not work on other CentOS releases. If available, we strongly recommend using a guide written for the version of CentOS you are using.

The following DigitalOcean tutorial may be of immediate interest, as it provides a general outline of how to use rsync to sync a local directory with remote ones:


Introduction

This article provides a quick way to backup the most common things in a typical web hosting scenario: website files and database data. We will setup a full daily backup of a website folder and a copying of this data to a remote server (this can also work for another VPS). We will also set up a rsync example to just copy the incremental changes. Finally, we'll set up backup of a MySQL database. The procedures described use a few simple Bash commands, rsync and cron to schedule backups. For example data, we can install Wordpress as per this tutorial. It will place Wordpress in /var/www/wordpress directory and a MySQL database wordpress and we now want to take a backup of all the data.

DigitalOcean provides Snapshots and Backups, to handle backups and snapshots very well. There are also excellent backup-as-a-service solutions that work with the minimum configuration. But sometimes we want to use another backup server or perhaps an inhouse server, and we want a quick way to pull the data from webhost back to our server. In that case, these tips can help.

There are two ways to do backup: incremental and full backups. A full backup copies all the data, while the snapshot only handles the changes since the last update.

Full Backup

Full backup typically does the following:

  • Make an archive of all the files in a folder
  • Copy the resulting archive to a remote server.

As noted, our data will reside in /var/www/wordpress directory. We will designate a backup folder location.

mkdir -p /backup/wordpress

The above command will create a /backup directory, and a /backup/wordpress directory, if they do not exist. To create a full snapshot of our data, we use the linux tool called tar.

tar -czf /backup/wordpress/initial_backup.tar.gz
/var/www/wordpress

Tar will create a gzip archive in a file initial_backup.tar.gz. We could add a v flag (so we get tar -czvf) if we want a verbose output (list of filenames). We name the file initial_backup.tar.gz so that we know that this is an initial backup, it is archived with tar and iz is zipped in a gzip format. Tar will use whatever arguments we provide as a source, in our case it will backup /var/www/wordpress directory. We could pass two or more arguments, whether they be files or folders: ie.

tar -czf /backup/cms_systems_backup.tar.gz /var/www/wordpress
/var/www/drupal /var/www/joomla

The last command would backup all of our installed cms systems.

Now, for our future backups, we may want to add a date when the backup was taken:

tar -czf /backup/wordpress/wordpress-`date '+%m%d%y'`.tar.gz
/var/www/wordpress

Lets' see what we have now:

[root@Backup ~]# ls -l /backup/wordpress/
total 9760
-rw-r--r-- 1 root root 4995743 Apr 17 12:16 initial_backup.tar.gz
-rw-r--r-- 1 root root 4995743 Apr 17 12:25 wordpress-041713.tar.gz
[root@Backup ~]#

We have two files, one called initial_backup, one called wordpress-041713 (for April 17th 2013, the time of this writing). Now, to schedule this daily, we need to create a crontab entry. Crontab is a linux task scheduler: we tell it when to do something and what task to actually do. Anyway, we open up the crontab editor:

EDITOR=nano crontab -e

It will open a crontab file in a text editor. By default, DO CentOS images include vim as editor, which requires a bit of setup, so we have used a simpler editor for this purpose, called nano editor. We could have just used the default editor with:

crontab -e

Now we need to tell cron to backup, say, every day at 3.30am, when there is hopefully not a lot of traffic. We will also tell it to email us any findings. We put this content into crontab:

MAILTO=email@example.com
30 3 * * * /bin/tar -czf /backup/wordpress/wordpress-`date
+\%m\%d\%y`.tar.gz /var/www/wordpress

We save the file with CTRL-X and confirm with Y and Enter. The above command will tell linux to repeat our command every day at 3:30. We also told cron to email us with the results. You will receive the message: /bin/tar: Removing leading `/' from member names, as a sign that everything went through. In case of errors, the message will contain the details so we can fix this. So, a daily backup is ready and working.

Copy the Backups to Another Remote Server

To copy the backups to another remote server, we will use scp - secure copy. First, we need to generate an SSH key:

ssh-keygen

We can leave the passphrase empty for now, and use the /root/.ssh/id_rsa_backup key file (or /home/username/.ssh/id_rsa_backup if we're not running as root). Now we can check the public key part:

cat .ssh/id_rsa_backup.pub

We need to copy this public part of SSH key to the remote server, to a file authorized_keys. I assume we already have a remote server called backup.example.com and a user backup. This could be an empty newly created DigitalOcean VPS (droplet), but the user has to be created beforehand. We will only do this part once.

scp .ssh/id_rsa_backup.pub
backup@backup.example.com:/home/backup/backup_key.pub

We'll be prompted for the backup users' password. We copied the file, now let's add it where it should be, in authorized_keys. I cannot assume that this user already has the file and folder set up, so lets check that info:

ssh backup@backup.example.com "mkdir -p /home/backup/.ssh"
ssh backup@backup.example.com "chmod 700 /home/backup/.ssh"
ssh backup@backup.example.com "touch /home/backup/.ssh/authorized_keys"
ssh backup@backup.example.com "chmod 600 /home/backup/.ssh/authorized_keys"
ssh backup@backup.example.com "mkdir -p /home/backup/backups"

The few commands above created a directory for SSH to work with, if it didn't exist, and also the authorized_keys file, which needs to be present for backups to work. We also created a backups directory to store our files to. Now what is left is to copy our public key to that file.

ssh backup@backup.example.com "cat /home/backup/backup_key.pub >>
/home/backup/.ssh/authorized_keys"

Now we can use this key to copy stuff in the future.

Now, let's copy the backup file over there:

scp -i .ssh/id_rsa_backup
/backup/wordpress/wordpress-041713.tar.gz
backup@backup.example.com:/home/backup/backups

If our key setup was correct, the file will be copied and we won't be asked for passwords. We can check that the file is really there:

ssh backup@backup.example.com "ls -l /home/backup/backups"

Ok, we can now schedule this action to the crontab too. Start the crontab editor again:

EDITOR=nano crontab -e

We will now alter our backup line: we want to add info to copy our backup archive when it's created. So, we append the new command so that it looks like this:

30 3 * * * /bin/tar -czf /backup/wordpress/wordpress-`date
+\%m\%d\%y`.tar.gz /var/www/wordpress;/usr/bin/scp -i
/root/.ssh/id_rsa_backup /backup/wordpress/wordpress-`date
+\%m\%d\%y`.tar.gz
backup@backup.example.com:/home/backup/backups

Note: this is not the usual way to do it, it would be better to setup a script which does all the tasks and then schedule the script. But for the brevity of this article, we'll use that form.

Incremental Backup

But what if we have our own backup software at another server? We just want to synchronize the data over, and then leave the other server to do the backup work. In addition, we want to preserve file stamps. Then we use rsync. The use case here is that we want to just incrementally copy over everything from /var/www/wordpress to a remote server, this time to a /home/backup/snapshots/wordpress directory. Here is a simple command to do all that:

ssh backup@backup.example.com "mkdir -p /home/backup/sync"
rsync -avz --delete -e "ssh -i /root/.ssh/id_rsa_backup"
/var/www/wordpress backup@backup.example.com:/home/backup/sync

The first line creates a snapshot directory and the second copies the changed files over. That means the files that were modified, newly created or deleted. We can schedule it in cron too:

EDITOR=nano crontab -e

The crontab line should look like this:

30 3 * * * /usr/bin/rsync -avz --delete -e "ssh -i
/root/.ssh/id_rsa_backup" /var/www/wordpress
backup@backup.example.com:/home/backup/sync

Now our remote server will always have a fresh synced copy of the data, and we can do the backup there.

Backup Database

We can also backup our database. First, we want to dump the data. If we followed the wordpress install guide, we also have a database wordpress, accessed by user wordpressuser with password password. We can do the initial dump like this:

mkdir /backup/mysql
mysqldump < wordpress -u wordpressuser -ppassword | gzip >
/backup/mysql/initial.sql.gz

This command created a initial.sql.gz gziped SQL file. To do it on a daily basis, we can schedule it in cron, like before. Our resulting cron line should look like this:

0 4 * * * /usr/bin/mysqldump < wordpress -u wordpressuser
-ppassword | /bin/gzip > /backup/mysql/mysql--`date +\%m\%d\%y`.sql.gz

Now we could also combine it with scp or rsync to copy it remotely.

0 4 * * * /usr/bin/mysqldump < wordpress -u wordpressuser
-ppassword | /bin/gzip > /backup/mysql/mysql-`date +\%m\%d\%y`.sql.gz;
/usr/bin/scp -i /root/.ssh/id_rsa_backup /backup/mysql/mysql-`date
+\%m\%d\%y`.sql.gz  backup@backup.example.com:/home/backup/

With this setup, we have a basic backup of our data set up for a case of emergency.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors
Default avatar
zlađurić

author

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
6 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

I think there is a mistake in the sql dump commands given above. They should be something like this:

mysqldump -u wordpressuser -ppassword wordpress | gzip > /backup/mysql/initial.sql.gz

instead of:

mysqldump < wordpress -u wordpressuser -ppassword | gzip > /backup/mysql/initial.sql.gz

How do your restore your files from one of these backups?

does this work for ubuntu?

Nice article!! Tnkssss!

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
July 10, 2013

@therealwebguru: This is not how our backup system works. This is an article on setting up your own backup system using rsync.

Is this what digitalocean uses to power the backup system? I thought you guys use Idera(formerly R1Soft)

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel