As you manage Linux servers, you’ll spend quite a bit of time using the command line. For most people, this means spending a lot of time with the Bash shell.
While most distributions provide sensible defaults for the styling of user and root prompts, it can be helpful to customize your prompt to add your own preferences. You can include a lot of useful information that can help you stay oriented and remind you when you are operating with elevated privileges.
We will be using an Ubuntu 12.04 VPS to experiment, but almost all modern Linux distributions should operate in a similar manner.
Before we begin to actually customize the shell, you should verify that your current shell actually is Bash.
This should be true for the vast majority of systems, but sometimes distribution maintainers opt for a different shell or users test out a new shell.
It is easy to verify by checking the /etc/passwd
file. Open the file in a pager like this:
less /etc/passwd
Each line in this file contains information about a different user. Find your user and the root user in the first column, as separated by a colon (:). In the last field, the default login shell for that user will be listed:
root:x:0:0:root:/root:/bin/bash
. . .
demouser:x:1000:1000:,,,:/home/demouser/bin/bash
If the last field is /bin/bash
, then you are all set.
If the last field is not /bin/bash
and you wish to change your default shell to Bash, you can edit this file with root privileges and change the last field associated with your user:
sudo nano /etc/passwd
After you make the change, log out and back in to use the Bash shell.
To get started, let’s explore what is already in our configuration files to define Bash prompts.
Bash configures its prompt by using the PS1
and the PS2
environmental variables.
PS1 defines the primary prompt that you will see. You see this every time you log in. By default, in Ubuntu systems, this should take the form of:
<pre> <span class=“highlight”>username</span>@<span class=“highlight”>hostname</span>: <span class=“highlight”>current_directory</span>$ </pre>
Note the $
at the end. This signifies that the shell is a normal user shell. For the root user, this is replaced with a #
to differentiate and make you aware that you are operating with elevated privileges.
The PS2 prompt is used for multi-line commands. You can see what the current PS2 variable is set to by typing this in your terminal:
echo \
Press enter directly after the backslash to see the prompt. By default, in Ubuntu, this is >
.
Usually, we define what these variables will hold in our ~/.bashrc
file, which is read when our interactive shell starts.
Inside this file on Ubuntu 12.04, we can find a section like this:
# uncomment for a colored prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the prompt
# force_color_prompt=yes
if [ -n "$force_color_prompt" ]; then
if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
# We have color support; assume it's compliant with Ecma-48
# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
# a case would tend to support setf rather than setaf.)
color_prompt=yes
else
color_prompt=
fi
fi
if [ "$color_prompt" = yes ]; then
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt
We can see some logic dictating when the prompt will be colorized. You need to uncomment the force_color_prompt=yes
line if you want a colorized prompt. Do this now to take advantage of the customizations we will be doing later.
force_color_prompt=yes
The part that we care about is the part that sets up the prompt. This is nested in an if-else construct with different prompts based on whether you are using color:
if [ "$color_prompt" = yes ]; then
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt
The top section adds color support. Let’s take a look at the second section, without color to grasp some of the basics first:
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
This looks fairly complicated and there are some parts that don’t seem to match anything we see in our normal shell usage.
The parts that include debian_chroot
indicate that if you are operating in a change root environment, the prompt will be modified to remind you. You probably want to keep this part of prompt intact, since this is a helpful feature.
The rest of the prompt definition looks like this:
\u@\h:\w\$:
This describes the primary prompt that we’ve been seeing this entire time, using some escape sequences.
We can find a whole list of possible escape sequences in the Bash man page:
<pre> \a an ASCII bell character (07) \d the date in “Weekday Month Date” format (e.g., “Tue May 26”) \D{format} the format is passed to strftime(3) and the result is inserted into the prompt string; an empty format results in a locale- specific time representation. The braces are required \e an ASCII escape character (033) \h the hostname up to the first `.’ \H the hostname \j the number of jobs currently managed by the shell \l the basename of the shell’s terminal device name \n newline \r carriage return \s the name of the shell, the basename of $0 (the portion following the final slash) \t the current time in 24-hour HH:MM:SS format \T the current time in 12-hour HH:MM:SS format @ the current time in 12-hour am/pm format \A the current time in 24-hour HH:MM format \u the username of the current user \v the version of bash (e.g., 2.00) \V the release of bash, version + patch level (e.g., 2.00.0) \w the current working directory, with $HOME abbreviated with a tilde (uses the value of the PROMPT_DIRTRIM variable) \W the basename of the current working directory, with $HOME abbreviated with a tilde ! the history number of this command # the command number of this command $ if the effective UID is 0, a #, otherwise a $ \nnn the character corresponding to the octal number nnn \ a backslash [ begin a sequence of non-printing characters, which could be used to embed a terminal control sequence into the prompt ] end a sequence of non-printing characters </pre>
As you can see, there is some basic information, and some information that you probably won’t need (ASCII bell character, version of Bash, etc).
Our prompt right now has the username (\u), an @ symbol, the first part of the hostname (\h), the current working directory (\w), and finally, a “$” for regular users and a “#” for the root user.
Let’s exit out of the ~/.bashrc
file so that we can test some of the other options.
Although eventually we’ll want to edit our ~/.bashrc
file to make our selections permanent, it is much easier to experiment with changing the prompt from the command line itself.
Before we start to modify things, let’s save our current value for PS1
into a new variable. This will allow us to switch back to our original prompt easier without having to log out and back in again in case we make a mistake.
ORIG=$PS1
Now, we have an environmental variable called ORIG
that will save a copy of what our default prompt is.
If we need to switch back to the original prompt, we can type:
PS1=$ORIG
Let’s start simple by just having our username and a $
for the actual prompt:
PS1="\u$"
We should get something that looks like this:
demouser$
Let’s space that our a bit to make it look nicer:
PS1="\u $: "
demouser $:
We probably don’t want to use the “$” literal character though. We should use the \$
escape sequence instead. This will dynamically modify the prompt based on whether we are root or not, allowing our PS1 to be used as root correctly:
PS1="\u \$: "
We can add any literal strings that we’d like in our prompt:
PS1="Hello, my name is \u! \$: "
Hello, my name is demouser! $:
We can also insert the results of arbitrary commands using regular shell functionality.
Here, we can have our prompt give the current load of our server by pulling the first column of the load metrics found at /proc/loadavg
using backticks to insert the results of the command:
PS1="\u, load: `cat /proc/loadavg | awk '{ print $1; }'` \$: "
demouser, load: 0.01 $:
This is a good way to know if you are taxing your system.
If the date or time is important for you to have in your prompt, you could try something like this. Let’s also compartmentalize our data a bit with some brackets and parenthesis to keep it organized. Let’s also add the \w
back in to keep track of our working directory:
PS1="[\u@\h, load: `cat /proc/loadavg | awk '{ print $1; }'`] (\d - \t) \w \$ "
[demouser@host, load: 0.01] (Thu Feb 20 - 13:15:20) ~ $
This is starting to get a bit unwieldy, especially if we change directories to something with a long path:
cd /etc/systemd/system/multi-user.target.wants
[demouser@host, load: 0.01] (Thu Feb 20 - 13:18:28) /etc/systemd/system/multi-user.target.wants $
If we still want all of this information, but want to make it shorter, one strategy is to divide the information between two lines with a \n
newline character:
PS1="[\u@\h, load: `cat /proc/loadavg | awk '{ print $1; }'`] (\d - \t)\n\w \$ "
[demouser@host, load: 0.00] (Thu Feb 20 - 13:20:00)
/etc/systemd/system/multi-user.target.wants $
Some people dislike a multi-line prompt, but it is one way to provide more information in your prompt.
Now that we have a good grasp on the different ways we can affect our prompts, let’s try out some coloration.
Bash allows you to introduce color into your prompt by using special codes. These are often a source of confusion, because the selected codes are not very descriptive.
Before we get to the actual color codes, we should talk about how we actually implement them. There is a right and a wrong way to define color codes in a Bash setting.
First, you must wrap your entire color code description in \[
and \]
tags. These brackets indicate to bash that the characters that exist after the first sequence until the last sequence should be considered non-printing characters.
Bash needs to know this so that it can estimate how many characters to let print before it wraps to the next line. If you do not enclose your color codes in \[
and \]
tags, Bash will count all of the characters as literal characters and will wrap the line too soon.
Secondly, inside the bracket non-print sequence, you need to specify the beginning of a color prompt by typing either \e[
or \033[
. These both do the same thing and indicate the start of an escape sequence. I will use \e[
in this guide because I think it is a bit more clear.
Before the \]
, you need an “m” to indicate that you are giving a color sequence.
So basically, each time we want to modify the color, we must enter something in our prompt that looks like:
<pre> [\e[<span class=“highlight”>color_information</span>m] </pre>
As you can see, this is the part that makes our prompts especially messy.
As for the color codes, the basic codes to change color of the foreground text are here:
You can also modify these base values by setting an “attribute” before the base value, separated by a semi-colon (;).
Depending on what kind of terminal you are using, these can behave rather differently. Some of the more common attributes are:
So if you wanted underlined green text, you would use a sequence like this:
\[\e[4;32m\]
We would then type in the prompt we want. Afterwards, we probably want to reset the color back to its original value so that the text that we type into the terminal is not colored strangely.
We can do this by using another color code that indicates that Bash should reset the prompt color. This code is:
\[\e[0m\]
So together, a simple colored prompt with the username and host could look like this:
PS1="\[\e[4;32m\]\u@\h\[\e[0m\]$ "
We can also specify background colors for more complexity. Background colors cannot take attributes. They are:
Although you can specify background colors, attributes, and text color all in one go like this:
\[\e[42;1;36m\]
It usually works better if you separate the background information from the other information:
\[\e[42m\]\[\e[1;36m\]
Sometimes, if you are just using the “normal” text attribute (0), the coloration gets garbled in some terminals. You can avoid this by not specify the normal value with 0, as it is the default anyways.
Now that we have played around with our prompt awhile, we should have a good idea of how we want our prompt to look. You should be able to create both a colorized and none-colored prompt.
For our example, we will use the following colored prompt:
PS1="[\[\e[0;32m\]\u@\h, load: `cat /proc/loadavg | awk '{ print $1; }'`\[\e[00m\]] (\[\e[00;35m\]\d - \t\[\e[00m\])\n\w \$ "
We will use it’s non-colored equivalent also, for when we do not wish to have a colored bash prompt:
PS1="[\u@\h, load: `cat /proc/loadavg | awk '{ print $1; }'`] (\d - \t)\n\w \$ "
Now that we have both versions of the prompt that we want, we can edit the PS1
in our ~/.bashrc
file.
nano ~/.bashrc
As we discussed in the beginning, the prompts that are in our file now have included functionality to make it apparent when we are in a chroot environment. Let’s leave that part in. It looks like this right now:
if [ "$color_prompt" = yes ]; then
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt
Comment out the current PS1
assignments and copy the debian_chroot
logic below, so that it looks like this:
<pre> if [ “$color_prompt” = yes ]; then # PS1=‘${debian_chroot:+($debian_chroot)}[\033[01;32m]\u@\h[\033[00m]:[\033[01;34m]\w[\033[00m]$ ’ <span class=“highlight”>PS1=’${debian_chroot:+($debian_chroot)}‘</span> else # PS1=’${debian_chroot:+($debian_chroot)}\u@\h:\w$ ’ <span class=“highlight”>PS1=‘${debian_chroot:+($debian_chroot)}’</span> fi unset color_prompt force_color_prompt </pre>
At the end of the prompt, just before the last quotation closes, we can add the prompts that we want to implement. Actually, since our prompt uses single quotes, we want to change the quotation type in the current prompt to use double quotes.
In the first PS1
assignment, use the colorized version of your prompt. In the second, use the non-colored one.
<pre>
if [ “$color_prompt” = yes ]; then
# PS1=‘${debian_chroot:+($debian_chroot)}[\033[01;32m]\u@\h[\033[00m]:[\033[01;34m]\w[\033[00m]$ ’
PS1=<span class=“highlight”>"</span>${debian_chroot:+($debian_chroot)}<span class=“highlight”>[[\e[0;32m]\u@\h, load: cat /proc/loadavg | awk '{ print $1; }'
[\e[00m]] ([\e[00;35m]\d - \t[\e[00m])\n\w $ "</span>
else
# PS1=’${debian_chroot:+($debian_chroot)}\u@\h:\w$ ’
PS1=<span class=“highlight”>"</span>${debian_chroot:+($debian_chroot)}<span class=“highlight”>[\u@\h, load: cat /proc/loadavg | awk '{ print $1; }'
] (\d - \t)\n\w $ "</span>
fi
unset color_prompt force_color_prompt
</pre>
When we are finished, we can close and save the file.
Now, when you log out and back in, your prompt will change to the value you set.
There are many different ways that you can personalize your configurations. Colorizing certain items can make them stand out, and can help you locate the last prompt when scrolling through terminal history.
Another popular idea is to provide a special prompt for the root user so that the contrast will remind you of your privileges. Get creative and try to find the balance that works for you between useful information and clutter.
<div class=“author”>By Justin Ellingwood</div>
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.
This textbox defaults to using Markdown to format your answer.
You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!
Sign up for Infrastructure as a Newsletter.
Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.
Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.
I don’t think this will work the way you think:
Your load average won’t update, and will stay stuck on what it was when you first set the prompt. Instead try something like this:
That should update every time it gives you a new prompt.
option:
\@
(AM PM) instead of\t
for time displayIf anybody is having trouble getting the colors to stay after logging out make sure you uncomment the line that says
force_color_prompt=yes
.Actually it’s not clear for me why digital ocean Ubuntu instance must differ of standard Ubuntu instance. I mean when I install Ubuntu I don’t have to customize my terminal coloring and etc - it’s already colorized (because it should be, because it useful when it is). So the question is what for all of these difficulties? I tried to customize my prompt and it didn’t work.
Anybody can tell me why terminal colors are disabled by default?
wpg4665: Thanks for the heads up on the spelling issue. I’ve updated the guide.
Also, anyone else read demo-user as de-mouser??
Typo “usernmae@hostname” should be “username@hostname” Probably not the most important thing, but thought I’d mention it
or echo $SHELL
Zshell is awesome! We have tutorials on it here: https://www.digitalocean.com/community/articles/how-to-install-z-shell-zsh-on-a-cloud-server (installation) and here: https://www.digitalocean.com/community/articles/how-to-use-z-shell-zsh-on-a-cloud-server (usage)
im prefer zsh shell with oh-my-zsh framework (https://github.com/robbyrussell/oh-my-zsh)