I’ve following this article but I’m getting an “Execution failed” status for apache. It doesn’t look like the PID file exists in: /usr/local/apache/logs/httpd.pid

(Ubuntu 12.04)

There was a typo in the configuration. I have corrected it, please let me know if you continue having issues.

Cheers, that’s done it!

Hi.

I installed monit as above on 12.04 & it’s running but I get this (names changed to protect the innocent):

`$ ps aux | grep monit root 1193 0.0 0.0 5492 832 ? S Sep12 1:27 /usr/bin/monit -c /etc/monit/monitrc fubar 12127 0.0 0.0 4372 812 pts/1 S+ 02:05 0:00 grep --color=auto monit

$ sudo monit status [sudo] password for fubar: monit: error connecting to the monit daemon`

I’ve checked /etc/monit/monitrc & it looks good enough to get things going & as seen above I think it’s running…

Any help appreciated

sorry to answer my own question but in order to get rid of that error message & see monit’s status, I had to enable the httpd section in /et/monit/monitrc even though I wasn’t using the web interface (apparently you have to set the monit httpd process to allow connections from localhost).

Hope this helps someone else late at night while searching Google (it’s 02:42 in London ;-)

I have followed this tutorial and I keep getting this message:

monit: activation failed – There is no service by that name monit: activation failed – There is no service by that name

I copied and pasted the congfig for apache and mysql and tried again and still got the same messages.

do you have any ideas about what I have done wrong.

Excellent article, got a test forum running on Digital Ocean in around 1h and used this command to keep thin running after the terminal window closes which I found useful:

thin start -d

macrus.hann6: after your make changes to the config file, don’t forget to run $ monit reload. Also make sure the actual pid files exist at that location.

When I login as a user and run Monit I get “monit: The control file ‘/etc/monit/monitrc’ must be owned by you.”

The file is owned by root, and when I login as root and run monit nothing happens.

So then I change the file to be owned by the user and then get “monit: Error opening the log file ‘/var/log/monit.log’ for writing – Permission denied”

After changing the owners on a lot of files eventually I don’t get any errors, and I also don’t see Monit.

Running monit status gives me “monit: error connecting to the monit daemon”

I am puzzled.

I’m experiencing some troubles with firewall configuration for the web access. i’ve set firewall as described here: https://www.digitalocean.com/community/articles/how-to-set-up-a-firewall-using-ip-tables-on-ubuntu-12-04

if i try to add sudo iptables -A INPUT -p tcp --dport 2812 -j ACCEPT (output too)

i’m unable to access. if i flush the firewall and remove all rules i’m able to access.

any idea? what i’m doing wrong?

i solved with:

sudo nano /etc/iptables/rules.v4 inserting this in the line i needed -A INPUT -p tcp -m tcp --dport 2812 -j ACCEPT

I followed the above steps and saw the same issue as Adam Patterson. I changed the owner of monitrc to the logged-in user and now on start I get a similar but less specific error: “error : Cannot open for write – Permission denied” I made sure the monit.log was owned by the same user as monitrc and /usr/bin/monit. I’m not sure what else I might need to modify.

@ryankbrown: Is there any reason you do not want to run monit as root?

I followed the above steps and saw the same issue as Adam Patterson. I changed the owner of monitrc to the logged-in user and now on start I get a similar but less specific error: “error : Cannot open for write – Permission denied” I made sure the monit.log was owned by the same user as monitrc and /usr/bin/monit. I’m not sure what else I might need to modify.

Ummm… Not sure how I re-posted the original question…

Well, I can certainly run monit as root. It is a general policy here to use a sysadmin account. (Not sure, not my policy) but I can likely get around it if that is a problem.

Thanks you.

How about CentOS?

Found it: Need to install this EPEL repository first: http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm (http://www.unixmen.com/install-and-configure-monit-on-centos-rhel-ubuntu-debian/)

I want to use Monit for Unicorn_rails instances From which user i should run unicorn (deploer || root) ? How to achive restarting application through monit after each deploy?

I love the fact that every article im searching for i able to find on digitalocean… great service btw!

hi i really loved ‘monit’,

i tested in my localhost and it is working fine,but i want to install and configure it in my website server. i tried to put my website name like this by connecting to the server using ssh

set httpd port 2812 use address abc.website.com # only accept connection from localhost allow localhost # allow localhost to connect to the server and allow admin:admin # require user ‘admin’ with password ‘monit’

but when trying to open the website in browser as abc.website.com:2812 nothing happens loading loading please help me

Same here, MyIp:2812 does not give anything.

I have installed this with no problem in the past but for some reason monit isn’t doing anything. I type monit -t and get no feedback. monit reload does nothings. And the web interface is unavailable. I have tried removing the package and reinstalling with no luck. monit status also just returns without printing anything.

I get this when doing monit status: monit: cannot read status from the monit daemon

Got the same “error connecting to the monit daemon” message upon “monit status” even though monit’s httpd was configured, the port was open, and I could approach the httpd server with wget/lynx. It turned out the solution was to tell monit where the conf file is: monit -c /etc/monitrc status

So if I have elasticsearch running in my etc/elasticsearch. What would my command be to keep it running?

And I put this is my “”/etc/monit/monitrc" file.

I didn’t understand the bit about “/etc/init.d” commands I couldn’t see elasticsearch in there at all.

@Jonny: How did you install elasticsearch? There should be an init script installed at /etc/init.d/elasticsearch As for an elasticsearch monit file, they have a template in their Chef cookbook that you could adapt: https://github.com/elasticsearch/cookbook-elasticsearch/blob/master/templates/default/elasticsearch.monitrc.conf.erb

@Andrew SB I sued the debian package from elasticsearch in conjunction from your article.

There is an elasticsearch file in the /etc/init.d/ directory yes.The contents say it’s the startup script

“# /etc/init.d/elasticsearch – startup script for Elasticsearch” and it has various other controls in there.

1. I should could take the template and place it in my “/etc/monit/monitrc” file?

2. Where would I need to adapt it? (Apologies for this question, it’s all new to me)

Sorry to double post,

Looking at your stuff about mysql and configuring that: you have

check process mysqld with pidfile /var/run/mysqld/mysqld.pid start program = “/etc/init.d/mysql start” stop program = “/etc/init.d/mysql stop”

Would mine be for elasticsearch be:

Wasn’t sure what to put here on the first line as /var/run/ doesn’t contain anything for elasticsearch Then:

start program = “/etc/init.d/elasticsearch restart” with timeout 60 seconds stop program = “/etc/init.d/elasticsearch stop”

I’ve found this in my /etc/init.d/elasticsearch

Define other required variables

PID_FILE=/var/run/$NAME.pid DAEMON=$ES_HOME/bin/elasticsearch

@Jonny: You can add it to the end of “/etc/monit/monitrc” file or you can create a new file called “/etc/monit/conf.d/elasticsearch”

To start, you could use this:

<pre> check process elasticsearch with pidfile /var/run/elasticsearch.pid start program = “/etc/init.d/elasticsearch restart” with timeout 60 seconds stop program = “/etc/init.d/elasticsearch stop” if cpu > 90% for 15 cycles then alert if totalmem > 90% for 15 cycles then alert if loadavg(15min) greater than 10 for 50 cycles then alert group elasticsearch </pre>

@Andrew SB Thank you for your help, that seems to have done it. It wasn’t running, but I added the above to my monitrc file and ran monit reload.

Thanks

Jonny

Hi Author,

Thanks for your great article. I would like to know how can I configure settings to get an email before restarting apache or mysql service?

My intention to get updated when service is down and this monit restarts it.

Please advise.

Many thanks

@mraheel83: See Setting an alert recipient.

You can add the following line to your Monit config file to get email alerts:

set alert your@email.address

I was looking at the Apache service, I get “Execution failed” I think the path should be “/var/run/apache2/apache2.pid” and not “/run/apache2.pid”

I am using Ubuntu 14.04

hi, need help with problem I have with monit. I have changed the default SSH listening port and since than monit keep sending me this message every 15 minutes: “‘sshd’ failed, cannot open a connection to INET[127.0.0.1:22] via TCP” What should I do to make monit stop doing that? Thanks!

Problem solved. I had to change default port in the file /usr/share/monit-cn/sshd.conf and then run update-monit.d. That did the work and now monit doesn’t send. me the message anymore.

Followed instructions and works perfectly. Thank you very much and boy what a useful service Monit is.

check process mysqld with pidfile /var/run/mysqld/mysqld.pid start program = “/etc/init.d/mysql start” stop program = “/etc/init.d/mysql stop”

should be

check process mysqld with pidfile /var/run/mysqld/mysqld.pid start program = “/sbin/mysql start” stop program = “/sbin/mysql stop”

I got “execution failed” for apache error ??

What m i doing wrong? something near

    start program = "/etc/init.d/apache2 start" with timeout 60 seconds
    stop program  = "/etc/init.d/apache2 stop"```
Thanks

Thanks for this. Everything that I’ve looked for regarding servers, I have found here. Keep up the good work.

I followed this exactly and got execution failed for apache on ubuntu 14.04