Tutorial

How To Install LAMP (Linux, Apache, MySQL, PHP) on Fedora

Published on November 7, 2012
How To Install LAMP (Linux, Apache, MySQL, PHP) on Fedora

About LAMP

LAMP stack is a group of open source software used to get web servers up and running. The acronym stands for Linux, Apache, MySQL, and PHP. Since the server is already running Fedora, the linux part is taken care of. Here is how to install the rest.

Setup

Before you start installing the LAMP programs, you should first download and install all of the updates with yum update:

yum update

Step One—Install Apache

Apache is a free open source software which runs over 50% of the world’s web servers.

To install apache, open terminal and type in this command:

sudo yum install httpd

Once it installs, you can start apache running on your VPS:

sudo service httpd start

That’s it. To check if Apache is installed, direct your browser to your server’s IP address (eg. http://12.34.56.789). You should see the default Fedora page Fedora Default

How to find your Server’s IP address

You can run the following command to reveal your server’s IP address.

ifconfig eth0 | grep inet | awk '{ print $2 }'

Step Two—Install MySQL

MySQL is a powerful database management system used for organizing and retrieving data on a virtual server

To install MySQL, open terminal and type in these commands:

sudo yum install mysql mysql-server
sudo service mysqld start

During the installation, MySQL will ask you for your permission twice. After you say Yes to both, MySQL will install.

Once it is done installing, you can set a root MySQL password:

sudo /usr/bin/mysql_secure_installation

The prompt will ask you for your current root password.

Since you just installed MySQL, you most likely won’t have one, so leave it blank by pressing enter.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Then the prompt will ask you if you want to set a root password. Go ahead and choose Y and follow the instructions.

Fedora automates the process of setting up MySQL, asking you a series of yes or no questions.

It’s easiest just to say Yes to all the options. At the end, MySQL will reload and implement the new changes.

By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y                                            
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] y
... Success!

By default, MySQL comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MySQL
installation should now be secure.

Thanks for using MySQL!

Step Three—Install PHP

PHP is an open source web scripting language that is widely used to build dynamic webpages.

To install PHP on your virtual private server, open terminal and type in this command:

sudo yum install php php-mysql

Once you answer yes to the PHP prompt, PHP will install itself.

PHP Modules

PHP also has a variety of useful libraries and modules that you can add onto your server. You can see the libraries that are available by typing:

yum search php-

Terminal then will display the list of possible modules. The beginning looks like this:

php-fpdf-doc.noarch : Documentation for php-fpdf
php-libvirt-doc.noarch : Document of php-libvirt
php-pear-Auth-radius.noarch : RADIUS support for php-pear-Auth
php-pear-Auth-samba.noarch : Samba support for php-pear-Auth
ice-php-devel.i686 : PHP tools for developping Ice applications
ice-php-devel.x86_64 : PHP tools for developping Ice applications
perl-PHP-Serialization.noarch : Converts between PHP's serialize() output and
                              : the equivalent Perl structure
php-IDNA_Convert.noarch : Provides conversion of internationalized strings to
                        : UTF8
php-Kohana.noarch : The Swift PHP Framework
php-LightweightPicasaAPI.noarch : A lightweight API for Picasa in PHP
php-PHPMailer.noarch : PHP email transport class with a lot of features
php-Smarty.noarch : Template/Presentation Framework for PHP
php-ZendFramework.noarch : Leading open-source PHP framework
php-ZendFramework-Auth-Adapter-Ldap.noarch : Zend Framework LDAP
                                           : Authentication Adapter
php-ZendFramework-Cache-Backend-Apc.noarch : Zend Framework APC cache backend

To see more details about what each module does, type the following command into terminal, replacing the name of the module with whatever library you want to learn about.

yum info name of the module

Once you decide to install the module, type:

sudo yum install name of the module

You can install multiple libraries at once by separating the name of each module with a space.

Congratulations! You now have LAMP stack on your droplet!

We should also set the processes to run automatically when the server boots (php will run automatically once Apache starts):

sudo chkconfig httpd on
sudo chkconfig mysqld on

Step Four—RESULTS: See PHP on your Server

Although LAMP is installed on your virtual server, we can still take a look and see the components online by creating a quick php info page

To set this up, first create a new file:

sudo nano /var/www/html/info.php

Add in the following line:

<?php
phpinfo();
?>

Then Save and Exit.

Restart apache so that all of the changes take effect on your virtual server:

sudo service httpd restart

Finish up by visiting your php info page (make sure you replace the example ip address with your correct one): http://12.34.56.789/info.php

It should look similar to this:

php info page
By Etel Sverdlov

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

mysqld has to be replaced with mariadb. For some reason systemctl status mysqld will correct, but enable and start won’t.

In my PC the repositories didn’t find any package with name: “php-mysql”. The terminal says something like this: “No match for argument: php-mysql”

So I typed the command:

dnf search php- | grep mysql

It found that the real package name nowadays is “php-mysqlnd”, so try to install this instead of “php-mysql”:

dnf install php-mysqlnd

i’ve signed up and bookmarked this site because of the explaination : ) thanks a lot

Very nice tutorial!

Everything seems to go fine until I try to view the Apache test page. When I try entering my ip address into a browser, it just spins for awhile then says the webpage is not available. Any suggestions?

Hi, sorry, could you help me please?

I followed all the steps but when I try to run this services, I got this warning:

Command : sudo service httpd start

Redirecting to /bin/systemctl start httpd.service Job for httpd.service failed. See ‘systemctl status httpd.service’ and ‘journalctl -xn’ for details.

Command: sudo service mysqld start

Redirecting to /bin/systemctl start mysqld.service

After run “systemctl status httpd.service’ and 'journalctl -xn” I got


httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since Sat 2015-04-25 03:22:31 EDT; 2min 16s ago
Process: 19384 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=0/SUCCESS)
Process: 19383 ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND (code=exited, status=1/FAILURE)
Main PID: 19383 (code=exited, status=1/FAILURE)

Apr 25 03:22:31 Project systemd[1]: Starting The Apache HTTP Server...
Apr 25 03:22:31 Project httpd[19383]: AH00526: Syntax error on line 357 of ...f:
Apr 25 03:22:31 Project httpd[19383]: Invalid command '--', perhaps misspel...on
Apr 25 03:22:31 Project systemd[1]: httpd.service: main process exited, cod...RE
Apr 25 03:22:31 Project systemd[1]: Failed to start The Apache HTTP Server.
Apr 25 03:22:31 Project systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.

Note that Fedora 20 has firewalld running by default. You won’t be able to access the fedora test page unless you add an exception for httpd.

firewall-cmd --add-service=http

Thanks for the awesome tutorial!! The installation was very smooth

This comment has been deleted

    Just a concern (newb on web servers). When I install apache and start the service, to test do I go to the browser from my current location. Or, is it referring to the browser in the droplet? When I try to get to my IP the request times out. Someone looked and said I had port 80 closed, but I don’t want to mess with firewall rules unless it’s definitely necessary.

    Try DigitalOcean for free

    Click below to sign up and get $200 of credit to try our products over 60 days!

    Sign up

    Join the Tech Talk
    Success! Thank you! Please check your email for further details.

    Please complete your information!

    Featured on Community

    Get our biweekly newsletter

    Sign up for Infrastructure as a Newsletter.

    Hollie's Hub for Good

    Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

    Become a contributor

    Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

    Welcome to the developer cloud

    DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

    Learn more