Tutorial

How To Install the Apache Web Server on Ubuntu 18.04

Updated on October 18, 2021
English
How To Install the Apache Web Server on Ubuntu 18.04
Not using Ubuntu 18.04?Choose a different version or distribution.
Ubuntu 18.04

Introduction

The Apache HTTP server is the most widely-used web server in the world. It provides many powerful features including dynamically loadable modules, robust media support, and extensive integration with other popular software.

In this guide, you will learn how to install an Apache web server on your Ubuntu 18.04 server. This guide also outlines information about important Apache files and directories.

Prerequisites

Before you begin this guide, you should have a regular, non-root user with sudo privileges configured on your server. Additionally, you will need to enable a basic firewall to block non-essential ports. You can learn how to configure a regular user account and set up a firewall for your server by following our initial server setup guide for Ubuntu 18.04.

When you have an account created, log in as your non-root user to begin.

Step 1 — Installing Apache

Apache is available within Ubuntu’s default software repositories, making it possible to install it using conventional package management tools.

Let’s begin by updating the local package index to reflect the latest upstream changes:

  1. sudo apt update

Then, install the apache2 package:

  1. sudo apt install apache2

After confirming the installation, apt will install Apache and all required dependencies.

Step 2 — Adjusting the Firewall

Before testing Apache, it’s necessary to modify the firewall settings to allow outside access to the default web ports. If you followed the instructions in the prerequisites, you should have a UFW firewall configured to restrict access to your server.

During installation, Apache registers itself with UFW to provide a few application profiles that can be used to enable or disable access to Apache through the firewall.

List the ufw application profiles by running the following command:

  1. sudo ufw app list

This will return a list of the application profiles:

Output
Available applications: Apache Apache Full Apache Secure OpenSSH

This list indicates that there are three profiles available for Apache:

  • Apache: This profile opens only port 80 (normal, unencrypted web traffic)
  • Apache Full: This profile opens both port 80 (normal, unencrypted web traffic) and port 443 (TLS/SSL encrypted traffic)
  • Apache Secure: This profile opens only port 443 (TLS/SSL encrypted traffic)

It is recommended that you enable the most restrictive profile that will still allow the traffic you’ve configured. Since you haven’t configured SSL for your server yet in this guide, you will only need to allow traffic on port 80:

  1. sudo ufw allow 'Apache'

Verify this change by checking the status:

  1. sudo ufw status

Now the allowed HTTP traffic will be displayed in the output:

Output
Status: active To Action From -- ------ ---- OpenSSH ALLOW Anywhere Apache ALLOW Anywhere OpenSSH (v6) ALLOW Anywhere (v6) Apache (v6) ALLOW Anywhere (v6)

The Apache profile has now been activated to allow access to the web server.

Step 3 — Checking your Web Server

At the end of the installation process, Ubuntu 18.04 starts Apache. The web server should already be up and running.

Check with the systemd init system to make sure the service is running:

  1. sudo systemctl status apache2
Output
● apache2.service - The Apache HTTP Server Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: Drop-In: /lib/systemd/system/apache2.service.d └─apache2-systemd.conf Active: active (running) since Tue 2021-09-28 16:52:56 UTC; 1min 14s ago Main PID: 9409 (apache2) Tasks: 55 (limit: 4915) CGroup: /system.slice/apache2.service ├─9409 /usr/sbin/apache2 -k start ├─9410 /usr/sbin/apache2 -k start └─9411 /usr/sbin/apache2 -k start

This output demonstrates that the service has started successfully. However, the best way to verify this is to request a page from Apache.

You can access the default Apache landing page to confirm that the software is running properly through your IP address. If you do not know your server’s IP address, you can get it a few different ways from the command line.

Run the following at your server’s command prompt:

  1. hostname -I

You will receive a few addresses separated by spaces. You can try each in your web browser to check if they work.

An alternative is running the following command, which should give you your public IP address as it is identified from another location on the internet:

  1. curl -4 icanhazip.com

When you have your server’s IP address, enter it into your browser’s address bar:

http://your_server_ip

You should receive the default Ubuntu 18.04 Apache web page:

Apache default page

This web page indicates that Apache is working correctly. It also includes some basic information about important Apache files and directory locations.

Step 4 — Managing the Apache Process

Now that you have your web server up and running, let’s review some basic management commands.

You can stop your web server with the following command::

  1. sudo systemctl stop apache2

To start the web server when it is stopped, run this command:

  1. sudo systemctl start apache2

You can stop and then start the service again by running the following:

  1. sudo systemctl restart apache2

If you are only making configuration changes, Apache can often reload without dropping connections. To do this, execute the following command:

  1. sudo systemctl reload apache2

By default, Apache is configured to start automatically when the server boots. If this is not what you want, you can disable this behavior with the following:

  1. sudo systemctl disable apache2

Alternatively, to enable or re-enable the service to start up at boot, run this command:

  1. sudo systemctl enable apache2

Apache should now start automatically when the server boots again.

When using the Apache web server, you can use virtual hosts (similar to server blocks in Nginx) to encapsulate configuration details and host more than one domain from a single server. For our example, we will set up a domain called your_domain, but you should replace this with your own domain name. To learn more about setting up a domain name with DigitalOcean, read our Introduction to DigitalOcean DNS.

Apache on Ubuntu 18.04 has one server block enabled by default that is configured to serve documents from the /var/www/html directory. While this works well for a single site, it can become unwieldy if you are hosting multiple sites. Instead of modifying /var/www/html, create a directory structure within /var/www for a your_domain site, leaving /var/www/html in place as the default directory to be served if a client request doesn’t match any other sites.

Create the directory for your_domain as follows:

  1. sudo mkdir /var/www/your_domain

Next, assign ownership of the directory with the $USER environment variable:

  1. sudo chown -R $USER:$USER /var/www/your_domain

The permissions of your web roots should be correct if you haven’t modified your unmask value, but you can make sure by typing the following:

  1. sudo chmod -R 755 /var/www/your_domain

Next, create a sample index.html page using nano or your favorite editor:

  1. nano /var/www/your_domain/index.html

Inside, add the following sample HTML:

/var/www/your_domain/index.html
<html>
    <head>
        <title>Welcome to Your_domain!</title>
    </head>
    <body>
        <h1>Success!  The your_domain virtual host is working!</h1>
    </body>
</html>

Save and close the file when you are finished. If you used nano, you can exit by pressing CTRL + X, then Y, and ENTER.

In order for Apache to serve this content, it’s necessary to create a virtual host file with the correct directives. Instead of modifying the default configuration file located at /etc/apache2/sites-available/000-default.conf directly, make a new one at /etc/apache2/sites-available/your_domain.conf:

  1. sudo nano /etc/apache2/sites-available/your_domain.conf

Add in the following configuration block, which is similar to the default, but updated for your new directory and domain name:

/etc/apache2/sites-available/your_domain.conf
<VirtualHost *:80>
    ServerAdmin webmaster@localhost
    ServerName your_domain
    ServerAlias www.your_domain
    DocumentRoot /var/www/your_domain
    ErrorLog ${APACHE_LOG_DIR}/error.log
    CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>

Notice that we’ve updated the DocumentRoot to our new directory and ServerAdmin to an email that the your_domain site administrator can access. We’ve also added two directives: ServerName, which establishes the base domain that should match for this virtual host definition, and ServerAlias, which defines further names that should match as if they were the base name.

Save and close the file when you are finished.

Next, enable the file with the a2ensite tool:

  1. sudo a2ensite your_domain.conf

Disable the default site defined in 000-default.conf:

  1. sudo a2dissite 000-default.conf

Now test for configuration errors:

  1. sudo apache2ctl configtest

You should receive the following output:

Output
Syntax OK

Restart Apache to implement your changes:

  1. sudo systemctl restart apache2

Apache should now serve your domain name. You can test this by navigating to http://your_domain, where you should receive something like the following:

Apache virtual host example

Step 6 – Getting Familiar with Important Apache Files and Directories

Now that you know how to manage the Apache service itself, you should take a few minutes to familiarize yourself with a few important directories and files.

Content

  • /var/www/html: The actual web content, which by default only consists of the default Apache page you saw earlier, is served out of the /var/www/html directory. This can be changed by altering Apache configuration files.

Server Configuration

  • /etc/apache2: The Apache configuration directory. All of the Apache configuration files reside here.
  • /etc/apache2/apache2.conf: The main Apache configuration file. This can be modified to make changes to the Apache global configuration. This file is responsible for loading many of the other files in the configuration directory.
  • /etc/apache2/ports.conf: This file specifies the ports that Apache will listen on. By default, Apache listens on port 80 and additionally listens on port 443 when a module providing SSL capabilities is enabled.
  • /etc/apache2/sites-available/: The directory where per-site virtual hosts can be stored. Apache will not use the configuration files found in this directory unless they are linked to the sites-enabled directory. Typically, all server block configuration is done in this directory and then enabled by linking to the other directory with the a2ensite command.
  • /etc/apache2/sites-enabled/: The directory where enabled per-site virtual hosts are stored. Typically, these are created by linking to configuration files found in the sites-available directory with the a2ensite. Apache reads the configuration files and links found in this directory when it starts or reloads to compile a complete configuration.
  • /etc/apache2/conf-available/, /etc/apache2/conf-enabled/: These directories have the same relationship as the sites-available and sites-enabled directories, but are used to store configuration fragments that do not belong in a virtual host. Files in the conf-available directory can be enabled with the a2enconf command and disabled with the a2disconf command.
  • /etc/apache2/mods-available/, /etc/apache2/mods-enabled/: These directories contain the available and enabled modules, respectively. Files ending in .load contain fragments to load specific modules, while files ending in .conf contain the configuration for those modules. Modules can be enabled and disabled using the a2enmod and a2dismod commands.

Server Logs

  • /var/log/apache2/access.log: By default, every request to your web server is recorded in this log file unless Apache is configured to do otherwise.
  • /var/log/apache2/error.log: By default, all errors are recorded in this file. The LogLevel directive in the Apache configuration specifies how much detail the error logs will contain.

Conclusion

Now that you have your Apache web server installed, you have many options for the type of content you can serve and the technologies you can use to create a richer experience.

If you’d like to build out a more complete application stack, you can read this article on how to configure a LAMP stack on Ubuntu 18.04. You can also learn how to obtain and install a free TLS/SSL certificate with this tutorial on How To Secure Apache with Let’s Encrypt on Ubutnu 18.04.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

I have done everything exactly like that but when I access example.com it opens up the example.com website from google.

Although, when I access my localhost(127.0.0.1) it opens up the file which I have places in example.com/html directory!

I 'm facing this issue in Ubuntu 18.04, Everything was working fine in ubuntu 16.04.

Can you please explain how I can fix that issue?

very helpful

When I disable the default site defined in 000-default.conf with the following code:

sudo a2dissite 000-default.conf

I get this error

ERROR: /etc/apache2/sites-enabled/000-default.conf is not a symbolic link, not deleting

Anyone knows what to do?

Now it’s easy, you can use easy-apache to set up everything for you, all you have to do is copy-paste below lines into your terminal, and enter your domain name when asked, it will also install SSL if you want

sudo add-apt-repository ppa:realpvn/easy-apache
sudo apt-get update
sudo apt-get install easy-apache

#to install Apache server
easy-apache -a

#to install SSL
easy-apache -s

#full setup, Apache and SSL
easy-apache -f

This comment has been deleted

    Why not using a specific user for the web server? In some servers I saw that the /var/www/ is property of the www-data or apache user

    Great tutorial. just missed this

    if the command sudo ufw status is returning only ‘active’, you will need to enable it first

    sudo ufw enable
    

    How much RAM would I need to run Apache and Ubuntu 18. I’m planning to server static HTML and images only.

    “In order for Apache to serve this content, it’s necessary to create a virtual host file with the correct directives” - What is meant by directives ?

    Was able to breeze over the parts I knew, and drill down into what was new to me. Love the digression into the explanation of sites, conf, mods. This article comes out of a mastery of the subject and a mastery of teaching.

    Try DigitalOcean for free

    Click below to sign up and get $200 of credit to try our products over 60 days!

    Sign up

    Join the Tech Talk
    Success! Thank you! Please check your email for further details.

    Please complete your information!

    Get our biweekly newsletter

    Sign up for Infrastructure as a Newsletter.

    Hollie's Hub for Good

    Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

    Become a contributor

    Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

    Welcome to the developer cloud

    DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

    Learn more
    DigitalOcean Cloud Control Panel