Tutorial

How To Use Git Branches

Published on March 18, 2013
Default avatar

By Jason Kurtz

How To Use Git Branches

This article is the third installment in the "Using Git" series. It assumes that you have read both the installation article and the article on how to use git effectively.

In the world of version control systems, GIT is arguably one of the best in terms of flexbility. It's very easy to learn the syntax and to figure out how git can best serve your workflow and your environment.

This tutorial will teach you how to create two branches (master and develop) and how to merge code from the development stage to production.

A branch, at its core, is a unique series of code changes with a unique name. Each repository can have one or more branches.

By default, the first branch is called "master".

Viewing branches

Prior to creating new branches, we want to see all the branches that exist. We can view all existing branches by typing the following:

git branch -a

Adding the "-a" to the end of our command tells GIT that we want to see all branches that exist, including ones that we do not have in our local workspace.

The output will look similiar to the following:

* master
  remotes/origin/master

The asterisk next to "master" in the first line of the output indicates that we are currently on that branch. The second line simply indicates that on our remote, named origin, there is a single branch, also called master.

Now that we know how to view branches, it time create our first one.

Creating branches

As stated in the beginning of this article, we want to have a development and a production setup for our coding environment.

We are going to treat the default "master" branch as our production and therefore need to create a single branch for development, or pre-production.

To create a new branch, named develop, type the following:

git checkout -b develop

Assuming we do not yet have a branch named "develop", the output would be as follows:

Switched to a new branch 'develop'

In the case of a branch by that name already existing, GIT would tell us so:

fatal: A branch named 'develop' already exists.

You can switch back and forth between your two branches, by using the git checkout command:

git checkout master

or

git checkout develop

Assuming the branch that you are trying to switch to exists, you'll see output similiar to the following:

Switched to branch 'master'

If you try to switch to a branch that doesn't exist, such as

git checkout nosuchbranch

Git will tell you:

error: pathspec 'nosuchbranch' did not match any file(s) known to git.

Now that we have multiple branches, we need to put them to good use. In our scenario, we are going to use our "develop" branch for testing out our changes and the master branch for releasing them to the public.

To illustrate this process, we need to switch back to our develop branch:

git checkout develop

Making changes to our develop branch

On this branch, we are going to create a new blank file, named "develop". Until we merge it to the master branch (in the following step), it will not exist there.

touch develop 

Just as in the previous tutorial, we need to tell git that we want to track this new file.

We can add the "develop" file, by typing:

git add develop 

The above set of commands will create a blank file, named "develop", and add it to GIT.

We also need to commit this file, which will attach this file to the branch we're currently on, which is "develop".

git commit -m "develop file" develop 

This file now exists on the develop branch; as we're about to find out, it doesn't exist on the master branch.

First, we are going to confirm that we are currently on the develop branch. We can do this by typing the following:

git branch 

The output should appear similar to the following:

* develop
  master

We learned earlier that the asterisk next to the branch name indicates that we are currently on that branch.

Running the "ls" command will show us that the two files exist:

ls

The output will show us that both of our files, respectively named "file" and "develop", are found:

develop file

Merging code between branches

The interesting part comes after we switch back to our master branch, which we can do with the git checkout command:

git checkout master

To ensure that we are on the master branch, we can run type the following:

git branch 

The output will tell us which branch we are one, indicated by the asterisk.

  develop 
* master

Running "ls" again, it appears that our new file is missing.

file

It's not missing - it's on our develop branch and we are on our master branch.

In our scenario, this file represents any change to any file (or a whole new file) that has passed all testing on our development branch,and is ready to be in production. The process of moving code between branches (often from development to production) is known as merging.

It is important to remember when merging, that we want to be on the branch that we want to merge to.

In this case, we want to merge from our develop branch, where the "develop" file exists, to our master branch.

Keeping that in mind, considering that we are already on the master branch, all we have to do is run the merge command.

One of the options that we can pass to the merge command, namely "--no-ff", means we want git to retain all of the commit messages prior to the merge. This will make tracking changes easier in the future.

To merge the changes from the develop branch to the master branch, type the following:

git merge develop --no-ff

The output of the command will be similiar to the following:

Merge made by the 'recursive' strategy.
 0 files changed
 create mode 100644 develop

Running the ls command again will confirm that our "develop" file is now on our master branch.

develop file

The last thing we now need to do, to make this change on our remote server is to push our changes, which we can do with the help of the git push command.

git push

You will see output similar to following, confirming that your the merge from your develop branch to the master branch on your remote server:

Counting objects: 4, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 332 bytes, done.
Total 3 (delta 1), reused 0 (delta 0)
To ssh://git@git.domain.tld/repository
   9af2dcb..53649cf  master -> master

Conclusion

By following the above tutorial, you should have a working dual-branch workflow setup and hopefully a working understanding about how branching works in GIT. Let us know what you think in the comments!

By Jason Kurtz

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


Tutorial Series: Introduction to Git: Installation, Usage, and Branches

This series covers the installation and usage of git on an Ubuntu 14.04 server. After completing the series, the reader should feel comfortable installing and using git, as well as how to create two branches (master and develop) and how to merge code from the development stage to production.

About the authors
Default avatar
Jason Kurtz

author

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

should we be pushing to our branch or just commiting?

The tutorial first add only “develop” file but then at later stage list file with ls command and get 2 files, as below, something is wrong here?

develop file

It’s a little confusing to have the branch called develop and the file too.

Call the file test_file or something.

Otherwise: great!

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
July 13, 2014

@pandey.vaibhav: I found this explanation fairly good:

The --no-ff flag causes the merge to always create a new commit object, even if the merge could be performed with a fast-forward. This avoids losing information about the historical existence of a feature branch and groups together all commits that together added the feature. Compare: In the latter case, it is impossible to see from the Git history which of the commit objects together have implemented a feature—you would have to manually read all the log messages. Reverting a whole feature (i.e. a group of commits), is a true headache in the latter situation, whereas it is easily done if the --no-ff flag was used.

Great tutorial.

One quick suggestion, could you please elaborate on the --no-ff flag of the merge command. It will help those who are new to git understand the concept of fast-forward, especially because there are so many different use-cases that can exist with a merge. Maybe it should be taken up in a new article in detail, but a small text around the flag will be very useful.

Hi, thanks for the great article,

One question I have and don’t seem to find any answers is what if I want to publish remotely the build version of my app not the whole master branch. The story is the following, on the master you might have all the source files but than maybe you use an automation tool (like grunt) to modify your files and prepare them for the deployment and put this in a build or distro folder. Is there a way to push only this from the master to the remote repo?

basically the workflow would be

  1. checkout develop branch
  2. make changes
  3. run tests
  4. merge to master
  5. build a distro version (minified, uglified, etc.)
  6. run tests on the build version
  7. push remote the build version only (not the whole master branch that contains also the source files)

thanks for any ideas :)

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
October 20, 2013

That part I thought get, but in my case (as I expect many people) are not developing using the nano editor over SSH, for instance i’m useing notepad++ with an SFTP connection, and if I’m not mistaken, it does not matter which brance I checked out all files and the latest version of the files are availible…

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
October 19, 2013

@martijn: The spot where you develop and merge is basically where your repo is.

You can switch from master<->develop any time you want by running the ‘git checkout [BRANCH]’ command where [BRANCH] is either master or develop.

I guess this sounds silly, but now I do have a master and develop branch of my project, but they are still in the same folder.

What I mean is, I do want a spot on my server where I can develop, and then merge/push/pull (or whatever this is called haha) my developed files to the ‘master’ spot on the server where the live website is.

Or did I completely miss the correct use of git?

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel