CSS Units Explained

Published on September 3, 2020

Jess Mitchell

CSS Units Explained

While we believe that this content benefits our community, we have not yet thoroughly reviewed it. If you have any suggestions for improvements, please let us know by clicking the “report an issue“ button at the bottom of the tutorial.


CSS has several options for which units to use when determining the size of various CSS properties. Learning all your options for CSS units can be key for styling in a way that’s easy to manage and looks great on any screen.

What is a CSS Unit?

A CSS unit determines the size of a property you’re setting for an element or its content. For example, if you wanted to set the property margin of a paragraph, you would give it a specific value. This value includes the CSS unit.

Let’s look at a small example:

p {
  margin: 20px;

In this case, margin is the property, 20px; is the value, and px (or “pixel”) is the CSS unit.

Even though it’s common to see units like px used, the big question is often, “What’s the best unit to use here?”

Here are some considerations to make when picking a unit type, and example use cases:

Absolute vs. Relative Units

When considering all the options for which units to use, it’s important to consider the two categories of units: absolute and relative.

Absolute Units

Units that are “absolute” are the same size regardless of the parent element or window size. This means a property set with a value that has an absolute unit will be that size when looked at on a phone or on a large monitor (and everything in between!)

Absolute units can be useful when working on a project where responsiveness is not being considered. For example, desktop apps that can’t be resized can be styled for the default dimensions. If the window doesn’t scale, you don’t need the content to either.

Hint: Absolute units can be less favourable for responsive sites because they don’t scale when the screen size changes.

Absolute UnitDescriptionExample
px1/96 of 1 inch (96px = 1 inch)font-size: 12px;
pt1/72 of 1 inch (72pt = 1 inch)font-size: 12pt;
pc12pt = 1pcfont-size: 1.2pc;
cmcentimeterfont-size: 0.6cm;
mmmillimeter (10 mm = 1 cm)font-size: 4mm;
ininchesfont-size: 0.2in;

Pixels (px) are typically the most popular absolute unit for screens. Centimeters, millimeters, and inches are more common for print and you may not have even known they were options!

Relative Units

Relative units are useful for styling responsive sites because they scale relative to the parent or window size (depending on the unit).

As a general rule, relative units can be used as the default for responsive sites. This can help you avoid having to update styles for different screen sizes.

Relative units can be a little more difficult than absolute units in determining which to use, so let’s go through your options in detail.

Relative UnitDescription
%Relative to the parent element’s value for that property
emRelative to the current font-size of the element
remRelative to the font-size of the root (e.g. the <html> element). “rem” = “root em”
chNumber of characters (1 character is equal to the width of the current font’s 0/zero)
vhRelative to the height of the viewport (window or app size). 1vh = 1/100 of the viewport’s height
vwRelative to the width of viewport. 1vw = 1/100 of the viewport’s width.
vminRelative to viewport’s smaller dimension (e.g. for portrait orientation, the width is smaller than the height so it’s relative to the width). 1vmin = 1/100 of viewport’s smaller dimension.
vmaxRelative to viewport’s larger dimension (e.g. height for portrait orientation). 1vmax = 1/100 of viewport’s larger dimension.
exRelative to height of the current font’s lowercase “x”.

It’s not always clear which of these options is best to use for each type of CSS property. For example, % is usually more appropriate for layout-related properties like width than it would be for font-size.

Here are some examples of when you would use each relative unit.

  • %: You want a child element to have 10% of the parent’s width as a margin so it never fills the whole parent element. If the parent’s size changes, the margin will update too.

    .child {
      margin: 10%;
  • em: You want the font of a child element to be half the size of its parent’s font-size (e.g. the paragraph under a section’s title).

    .child {
      font-size: 0.5em;
  • rem: The font-size should be twice the size as the root element’s font. This could be how you size your headers because they should all be the same size regardless of the parent container.

    .header {
      font-size: 2rem;
  • ch: You have a mono-spaced font (the characters are always the same width) and you only have space for 10 characters.

    .small-text {
      width: 10ch;
  • vh: Your landing page should always be the height of the viewport/window.

    .wrapper {
      height: 100vh;
  • vw: You have a section with text that should be half as wide as the viewport/window.

    .half-size {
      width: 50vw;
  • vmin: You have an image that should always be as wide as the viewport’s smaller dimension. On a phone being held in portrait mode, the image will be as wide as the viewport’s width.

    .min-width {
      width: 100vmin;
  • vmax: You don’t care if an image gets cut off because you want it to completely fill the larger dimension of the viewport. For example, if an image of a pattern is used as a background.

    .max-width {
      width: 100vmax;
  • ex: You probably won’t come across ex very often but it’s generally a good measure of a font’s mid-section. Let’s say you want to a font’s line-height to be double the height of the font’s “x”.

    .double-x {
      line-height: 2ex;

Overall, when and how you choose your CSS units will come down to a couple questions:

  • Do I want what I’m styling to scale when the viewport size changes?
  • If I do want it to scale, what do I want it to scale relative to in the app?

Once you’ve answered these questions, it’s a lot easier to nail down which unit to use. 💪

Further Reading

You can dig deeper into viewport units by reading this article, or have a look at this article about em vs rem units if the difference between those two units is still somewhat unclear.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors
Default avatar
Jess Mitchell


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
Leave a comment

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel