Docker is a great tool for automating the deployment of Linux applications inside software containers, but to really take full advantage of its potential it’s best if each component of your application runs in its own container. For complex applications with a lot of components, orchestrating all the containers to start up and shut down together (not to mention talk to each other) can quickly become unwieldy.
The Docker community came up with a popular solution called Fig, which allowed you to use a single YAML file to orchestrate all your Docker containers and configurations. This became so popular that the Docker team decided to make Docker Compose based on the Fig source, which is now deprecated. Docker Compose makes it easier for users to orchestrate the processes of Docker containers, including starting up, shutting down, and setting up intra-container linking and volumes.
In this tutorial, you will install the latest version of Docker Compose to help you manage multi-container applications, and will explore the basic commands of the software.
Using Docker Compose requires a combination of a bunch of different Docker concepts in one, so before we get started let’s take a minute to review the various concepts involved. If you’re already familiar with Docker concepts like volumes, links, and port forwarding then you might want to go ahead and skip on to the next section.
Each Docker container is a local instance of a Docker image. You can think of a Docker image as a complete Linux installation. Usually a minimal installation contains only the bare minimum of packages needed to run the image. These images use the kernel of the host system, but since they are running inside a Docker container and only see their own file system, it’s perfectly possible to run a distribution like CentOS on an Ubuntu host (or vice-versa).
Most Docker images are distributed via the Docker Hub, which is maintained by the Docker team. Most popular open source projects have a corresponding image uploaded to the Docker Registry, which you can use to deploy the software. When possible, it’s best to grab “official” images, since they are guaranteed by the Docker team to follow Docker best practices.
Docker containers are isolated from the host machine, meaning that by default the host machine has no access to the file system inside the Docker container, nor any means of communicating with it via the network. This can make configuring and working with the image running inside a Docker container difficult.
Docker has three primary ways to work around this. The first and most common is to have Docker specify environment variables that will be set inside the Docker container. The code running inside the Docker container will then check the values of these environment variables on startup and use them to configure itself properly.
Another commonly used method is a Docker data volume. Docker volumes come in two flavors — internal and shared.
Specifying an internal volume just means that for a folder you specify for a particular Docker container, the data will be persisted when the container is removed. For example, if you wanted to make sure your log files persisted you might specify an internal
A shared volume maps a folder inside a Docker container onto a folder on the host machine. This allows you to easily share files between the Docker container and the host machine.
The third way to communicate with a Docker container is via the network. Docker allows communication between different Docker containers via
links, as well as port forwarding, allowing you to forward ports from inside the Docker container to ports on the host server. For example, you can create a link to allow your WordPress and MariaDB Docker containers to talk to each other and use port-forwarding to expose WordPress to the outside world so that users can connect to it.
To follow this article, you will need the following:
CentOS 7 server, set up with a non-root user with sudo privileges (see Initial Server Setup on CentOS 7 for details)
Docker installed with the instructions from Step 1 and Step 2 of How To Install and Use Docker on CentOS 7
Once these are in place, you will be ready to follow along.
In order to get the latest release, take the lead of the Docker docs and install Docker Compose from the binary in Docker’s GitHub repository.
Check the current release and if necessary, update it in the command below:
- sudo curl -L "https://github.com/docker/compose/releases/download/1.23.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
Next, set the permissions to make the binary executable:
- sudo chmod +x /usr/local/bin/docker-compose
Then, verify that the installation was successful by checking the version:
- docker-compose --version
This will print out the version you installed:
Outputdocker-compose version 1.23.2, build 1110ad01
Now that you have Docker Compose installed, you’re ready to run a “Hello World” example.
The public Docker registry, Docker Hub, includes a simple “Hello World” image for demonstration and testing. It illustrates the minimal configuration required to run a container using Docker Compose: a YAML file that calls a single image.
First, create a directory for our YAML file:
- mkdir hello-world
Then change into the directory:
- cd hello-world
Now create the YAML file using your favorite text editor. This tutorial will use Vi:
- vi docker-compose.yml
Enter insert mode, by pressing
i, then put the following contents into the file:
my-test: image: hello-world
The first line will be part of the container name. The second line specifies which image to use to create the container. When you run the command
docker-compose up it will look for a local image by the name specified,
With this in place, hit
ESC to leave insert mode. Enter
ENTER to save and exit the file.
To look manually at images on your system, use the
docker images command:
- docker images
When there are no local images at all, only the column headings display:
OutputREPOSITORY TAG IMAGE ID CREATED SIZE
Now, while still in the
~/hello-world directory, execute the following command to create the container:
- docker-compose up
The first time we run the command, if there’s no local image named
hello-world, Docker Compose will pull it from the Docker Hub public repository:
OutputPulling my-test (hello-world:)... latest: Pulling from library/hello-world 1b930d010525: Pull complete . . .
After pulling the image,
docker-compose creates a container, attaches, and runs the hello program, which in turn confirms that the installation appears to be working:
Output. . . Creating helloworld_my-test_1... Attaching to helloworld_my-test_1 my-test_1 | my-test_1 | Hello from Docker. my-test_1 | This message shows that your installation appears to be working correctly. my-test_1 | . . .
It will then print an explanation of what it did:
Output. . . my-test_1 | To generate this message, Docker took the following steps: my-test_1 | 1. The Docker client contacted the Docker daemon. my-test_1 | 2. The Docker daemon pulled the "hello-world" image from the Docker Hub. my-test_1 | (amd64) my-test_1 | 3. The Docker daemon created a new container from that image which runs the my-test_1 | executable that produces the output you are currently reading. my-test_1 | 4. The Docker daemon streamed that output to the Docker client, which sent it my-test_1 | to your terminal. . . .
Docker containers only run as long as the command is active, so once
hello finished running, the container stops. Consequently, when you look at active processes, the column headers will appear, but the
hello-world container won’t be listed because it’s not running:
- docker ps
OutputCONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
-a flag to show all containers, not just the active ones:
- docker ps -a
OutputCONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 50a99a0beebd hello-world "/hello" 3 minutes ago Exited (0) 3 minutes ago hello-world_my-test_1
Now that you have tested out running a container, you can move on to exploring some of the basic Docker Compose commands.
To get you started with Docker Compose, this section will go over the general commands that the
docker-compose tool supports.
docker-compose command works on a per-directory basis. You can have multiple groups of Docker containers running on one machine — just make one directory for each container and one
docker-compose.yml file for each directory.
So far you’ve been running
docker-compose up on your own, from which you can use
CTRL-C to shut the container down. This allows debug messages to be displayed in the terminal window. This isn’t ideal though; when running in production it is more robust to have
docker-compose act more like a service. One simple way to do this is to add the
-d option when you
up your session:
docker-compose up -d
docker-compose will now fork to the background.
To show your group of Docker containers (both stopped and currently running), use the following command:
docker-compose ps -a
If a container is stopped, the
State will be listed as
Exited, as shown in the following example:
OutputName Command State Ports ------------------------------------------------ hello-world_my-test_1 /hello Exit 0
A running container will show
OutputName Command State Ports --------------------------------------------------------------- nginx_nginx_1 nginx -g daemon off; Up 443/tcp, 80/tcp
To stop all running Docker containers for an application group, issue the following command in the same directory as the
docker-compose.yml file that you used to start the Docker group:
docker-compose kill is also available if you need to shut things down more forcefully.
In some cases, Docker containers will store their old information in an internal volume. If you want to start from scratch you can use the
rm command to fully delete all the containers that make up your container group:
If you try any of these commands from a directory other than the directory that contains a Docker container and
.yml file, it will return an error:
OutputERROR: Can't find a suitable configuration file in this directory or any parent. Are you in the right directory? Supported filenames: docker-compose.yml, docker-compose.yaml
This section has covered the basics of how to manipulate containers with Docker Compose. If you needed to gain greater control over your containers, you could access the filesystem of the Docker container and work from a command prompt inside your container, a process that is described in the next section.
In order to work on the command prompt inside a container and access its filesystem, you can use the
docker exec command.
The “Hello World” example exits after it runs, so to test out
docker exec, start a container that will keep running. For the purposes of this tutorial, use the Nginx image from Docker Hub.
Create a new directory named
nginx and move into it:
- mkdir ~/nginx
- cd ~/nginx
Next, make a
docker-compose.yml file in your new directory and open it in a text editor:
- vi docker-compose.yml
Next, add the following lines to the file:
nginx: image: nginx
Save the file and exit. Start the Nginx container as a background process with the following command:
- docker-compose up -d
Docker Compose will download the Nginx image and the container will start in the background.
Now you will need the
CONTAINER ID for the container. List all of the containers that are running with the following command:
- docker ps
You will see something similar to the following:
Output of `docker ps`CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES b86b6699714c nginx "nginx -g 'daemon of…" 20 seconds ago Up 19 seconds 80/tcp nginx_nginx_1
If you wanted to make a change to the filesystem inside this container, you’d take its ID (in this example
b86b6699714c) and use
docker exec to start a shell inside the container:
- docker exec -it b86b6699714c /bin/bash
-t option opens up a terminal, and the
-i option makes it interactive.
/bin/bash opens a bash shell to the running container.
You will then see a bash prompt for the container similar to:
From here, you can work from the command prompt inside your container. Keep in mind, however, that unless you are in a directory that is saved as part of a data volume, your changes will disappear as soon as the container is restarted. Also, remember that most Docker images are created with very minimal Linux installs, so some of the command line utilities and tools you are used to may not be present.
You’ve now installed Docker Compose, tested your installation by running a “Hello World” example, and explored some basic commands.
While the “Hello World” example confirmed your installation, the simple configuration does not show one of the main benefits of Docker Compose — being able to bring a group of Docker containers up and down all at the same time. To see the power of Docker Compose in action, check out How To Secure a Containerized Node.js Application with Nginx, Let’s Encrypt, and Docker Compose and How To Configure a Continuous Integration Testing Environment with Docker and Docker Compose on Ubuntu 16.04. Although these tutorials are geared toward Ubuntu 16.04 and 18.04, the steps can be adapted for CentOS 7.
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.