How To Install the Apache Web Server on CentOS 7

Updated on August 24, 2021
How To Install the Apache Web Server on CentOS 7
Not using CentOS 7?Choose a different version or distribution.
CentOS 7


The Apache HTTP server is the most widely-used web server in the world. It provides many powerful features including dynamically loadable modules, robust media support, and extensive integration with other popular software.

In this guide, you will install an Apache web server with virtual hosts on your CentOS 7 server.


You will need the following to complete this guide:

Step 1 — Installing Apache

Apache is available within CentOS’s default software repositories, which means you can install it with the yum package manager.

As the non-root sudo user configured in the prerequisites, update the local Apache httpd package index to reflect the latest upstream changes:

  1. sudo yum update httpd

Once the packages are updated, install the Apache package:

  1. sudo yum install httpd

After confirming the installation, yum will install Apache and all required dependencies.

If you completed the Additional Recommended Steps for New CentOS 7 Servers guide mentioned in the prerequisites section, you will have installed firewalld on your server and you’ll need to open up port 80 to allow Apache to serve requests over HTTP. If you haven’t already done so, you can do this by enabling firewalld’s http service with the following command:

  1. sudo firewall-cmd --permanent --add-service=http

If you plan to configure Apache to serve content over HTTPS, you will also want to open up port 443 by enabling the https service:

  1. sudo firewall-cmd --permanent --add-service=https

Next, reload the firewall to put these new rules into effect:

  1. sudo firewall-cmd --reload

After the firewall reloads, you are ready to start the service and check the web server.

Step 2 — Checking your Web Server

Apache does not automatically start on CentOS once the installation completes. You will need to start the Apache process manually:

  1. sudo systemctl start httpd

Verify that the service is running with the following command:

  1. sudo systemctl status httpd

You will see an active status when the service is running:

Redirecting to /bin/systemctl status httpd.service ● httpd.service - The Apache HTTP Server Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2019-02-20 01:29:08 UTC; 5s ago Docs: man:httpd(8) man:apachectl(8) Main PID: 1290 (httpd) Status: "Processing requests..." CGroup: /system.slice/httpd.service ├─1290 /usr/sbin/httpd -DFOREGROUND ├─1291 /usr/sbin/httpd -DFOREGROUND ├─1292 /usr/sbin/httpd -DFOREGROUND ├─1293 /usr/sbin/httpd -DFOREGROUND ├─1294 /usr/sbin/httpd -DFOREGROUND └─1295 /usr/sbin/httpd -DFOREGROUND ...

As you can see from this output, the service appears to have started successfully. However, the best way to test this is to request a page from Apache.

You can access the default Apache landing page to confirm that the software is running properly through your IP address. If you do not know your server’s IP address, you can get it a few different ways from the command line.

Type this at your server’s command prompt:

  1. hostname -I

This command will display all of the host’s network addresses, so you will get back a few IP addresses separated by spaces. You can try each in your web browser to see if they work.

Alternatively, you can use curl to request your IP from icanhazip.com, which will give you your public IPv4 address as seen from another location on the internet:

  1. curl -4 icanhazip.com

When you have your server’s IP address, enter it into your browser’s address bar:


You’ll see the default CentOS 7 Apache web page:

Default Apache page for CentOS 7

This page indicates that Apache is working correctly. It also includes some basic information about important Apache files and directory locations. Now that the service is installed and running, you can now use different systemctl commands to manage the service.

Step 3 — Managing the Apache Process

Now that you have your web server up and running, let’s go over some basic management commands.

To stop your web server, type:

  1. sudo systemctl stop httpd

To start the web server when it is stopped, type:

  1. sudo systemctl start httpd

To stop and then start the service again, type:

  1. sudo systemctl restart httpd

If you are simply making configuration changes, Apache can often reload without dropping connections. To do this, use this command:

  1. sudo systemctl reload httpd

By default, Apache is configured to start automatically when the server boots. If this is not what you want, disable this behavior by typing:

  1. sudo systemctl disable httpd

To re-enable the service to start up at boot, type:

  1. sudo systemctl enable httpd

Apache will now start automatically when the server boots again.

The default configuration for Apache will allow your server to host a single website. If you plan on hosting multiple domains on your server, you will need to configure virtual hosts on your Apache web server.

When using the Apache web server, you can use virtual hosts (similar to server blocks in Nginx) to encapsulate configuration details and host more than one domain from a single server. In this step, you will set up a domain that is referred to as your_domain, but you should replace this with your own domain name. To learn more about setting up a domain name with DigitalOcean, see our Introduction to DigitalOcean DNS.

Apache on CentOS 7 has one server block enabled by default that is configured to serve documents from the /var/www/html directory. While this works well for a single site, it can become unwieldy if you are hosting multiple sites. Instead of modifying /var/www/html, you will create a directory structure within /var/www for the your_domain site, leaving /var/www/html in place as the default directory to be served if a client request doesn’t match any other sites.

Create the html directory for your_domain as follows, using the -p flag to create any necessary parent directories:

  1. sudo mkdir -p /var/www/your_domain/html

Create an additional directory to store log files for the site:

  1. sudo mkdir -p /var/www/your_domain/log

Next, assign ownership of the html directory with the $USER environmental variable:

  1. sudo chown -R $USER:$USER /var/www/your_domain/html

Make sure that your web root has the default permissions set:

  1. sudo chmod -R 755 /var/www

Next, create a sample index.html page using vi or your favorite editor:

  1. sudo vi /var/www/your_domain/html/index.html

Press i to switch to INSERT mode and add the following sample HTML to the file:

    <title>Welcome to your website!</title>
    <h1>Success! The your_domain virtual host is working!</h1>

Save and close the file by pressing ESC, typing :wq, and pressing ENTER.

With your site directory and sample index file in place, you are almost ready to create the virtual host files. Virtual host files specify the configuration of your separate sites and tell the Apache web server how to respond to various domain requests.

Before you create your virtual hosts, you will need to create a sites-available directory to store them in. You will also create the sites-enabled directory that tells Apache that a virtual host is ready to serve to visitors. The sites-enabled directory will hold symbolic links to virtual hosts that we want to publish. Create both directories with the following command:

  1. sudo mkdir /etc/httpd/sites-available /etc/httpd/sites-enabled

Next, you will tell Apache to look for virtual hosts in the sites-enabled directory. To accomplish this, edit Apache’s main configuration file and add a line declaring an optional directory for additional configuration files:

  1. sudo vi /etc/httpd/conf/httpd.conf

Add this line to the end of the file:

IncludeOptional sites-enabled/*.conf

Save and close the file when you are done adding that line. Now that you have your virtual host directories in place, you will create your virtual host file.

Start by creating a new file in the sites-available directory:

  1. sudo vi /etc/httpd/sites-available/your_domain.conf

Add in the following configuration block, and change the your_domain domain to your domain name:

<VirtualHost *:80>
    ServerName www.your_domain
    ServerAlias your_domain
    DocumentRoot /var/www/your_domain/html
    ErrorLog /var/www/your_domain/log/error.log
    CustomLog /var/www/your_domain/log/requests.log combined

This will tell Apache where to find the root directly that holds the publicly accessible web documents. It also tells Apache where to store error and request logs for this particular site.

Save and close the file when you are finished.

Now that you have created the virtual host files, you will enable them so that Apache knows to serve them to visitors. To do this, create a symbolic link for each virtual host in the sites-enabled directory:

  1. sudo ln -s /etc/httpd/sites-available/your_domain.conf /etc/httpd/sites-enabled/your_domain.conf

Your virtual host is now configured and ready to serve content. Before restarting the Apache service, let’s make sure that SELinux has the correct policies in place for your virtual hosts.

SELinux is configured to work with the default Apache configuration. Since you set up a custom log directory in the virtual hosts configuration file, you will receive an error if you attempt to start the Apache service. To resolve this, you need to update the SELinux policies to allow Apache to write to the necessary files. SELinux brings heightened security to your CentOS 7 environment, therefore it is not recommended to completely disable the kernel module.

There are different ways to set policies based on your environment’s needs, as SELinux allows you to customize your security level. This step will cover two methods of adjusting Apache policies: universally and on a specific directory. Adjusting policies on directories is more secure, and is therefore the recommended approach.

Adjusting Apache Policies Universally

Setting the Apache policy universally will tell SELinux to treat all Apache processes identically by using the httpd_unified boolean. While this approach is more convenient, it will not give you the same level of control as an approach that focuses on a file or directory policy.

Run the following command to set a universal Apache policy:

  1. sudo setsebool -P httpd_unified 1

The setsebool command changes SELinux boolean values. The -P flag will update the boot-time value, making this change persist across reboots. httpd_unified is the boolean that will tell SELinux to treat all Apache processes as the same type, so you enabled it with a value of 1.

Adjusting Apache Policies on a Directory

Individually setting SELinux permissions for the /var/www/your_domain/log directory will give you more control over your Apache policies, but may also require more maintenance. Since this option is not universally setting policies, you will need to manually set the context type for any new log directories specified in your virtual host configurations.

First, check the context type that SELinux gave the /var/www/your_domain/log directory:

  1. sudo ls -dZ /var/www/your_domain/log/

This command lists and prints the SELinux context of the directory. You will see output similar to the following:

drwxr-xr-x. root root unconfined_u:object_r:httpd_sys_content_t:s0 /var/www/your_domain/log/

The current context is httpd_sys_content_t, which tells SELinux that the Apache process can only read files created in this directory. In this tutorial, you will change the context type of the /var/www/your_domain/log directory to httpd_log_t. This type will allow Apache to generate and append to web application log files:

  1. sudo semanage fcontext -a -t httpd_log_t "/var/www/your_domain/log(/.*)?"

Next, use the restorecon command to apply these changes and have them persist across reboots:

  1. sudo restorecon -R -v /var/www/your_domain/log

The -R flag runs this command recursively, meaning it will update any existing files to use the new context. The -v flag will print the context changes the command made. You will see the following output confirming the changes:

restorecon reset /var/www/your_domain/log context unconfined_u:object_r:httpd_sys_content_t:s0->unconfined_u:object_r:httpd_log_t:s0

You can list the contexts once more to see the changes:

  1. sudo ls -dZ /var/www/your_domain/log/

The output reflects the updated context type:

drwxr-xr-x. root root unconfined_u:object_r:httpd_log_t:s0 /var/www/your_domain/log

Now that the /var/www/your_domain/log directory is using the httpd_log_t type, you are ready to test your virtual host configuration.

Once the SELinux context has been updated with either method, Apache will be able to write to the /var/www/your_domain/log directory. You can now successfully restart the Apache service:

  1. sudo systemctl restart httpd

List the contents of the /var/www/your_domain/log directory to see if Apache created the log files:

  1. ls -lZ /var/www/your_domain/log

You’ll see that Apache was able to create the error.log and requests.log files specified in the virtual host configuration:

-rw-r--r--. 1 root root 0 Feb 26 22:54 error.log -rw-r--r--. 1 root root 0 Feb 26 22:54 requests.log

Now that you have your virtual host set up and SELinux permissions updated, Apache will now serve your domain name. You can test this by navigating to http://your_domain, where you should see something like this:

Success! The example.com virtual host is working!

This confirms that your virtual host is successfully configured and serving content. Repeat Steps 4 and 5 to create new virtual hosts with SELinux permissions for additional domains.


In this tutorial, you installed and managed the Apache web server. Now that you have your web server installed, you have many options for the type of content you can serve and the technologies you can use to create a richer experience.

If you’d like to build out a more complete application stack, you can look at this article on how to configure a LAMP stack on CentOS 7.

Get Apache on a CentOS environment on a hosted virtual machine in seconds with DigitalOcean Droplets! Simple enough for any user, powerful enough for fast-growing applications or businesses.

Learn more here

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

After I had run this command “sudo systemctl restart httpd”, I got this and I have been battling it: “Job for httpd.service failed because the control process exited with error code. See “systemctl status httpd.service” and “journalctl -xe” for details.

I’ve followed all of your instructions just changed servername to www.webserver.com. But face the problem after test this by navigating to http://webserver.com >> “Server not found”. But when I try to navigate it to server’s IP http://ip_server >> display “/var/www/example.com/html/index.html”. Success! The example.com

awesome! Thank you for sharing!

This is very good content. Thanks DO

This comment has been deleted

    I don’t need to change the log folder to httpd_log_t as it seems it’s already writing to log files while having httpd_sys_content_t as the SELinux context.

    This is my current ls -dZ output:

    drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_content_t:s0 /var/www/cbdhempoilusa.com/log

    On the other hand, for another virtual host, I’ve set this as you explained in this tutorial but like I’ve said - there is no visible difference.

    Using Centos 7 and having apache:apache as the ownership of the files

    Thanks you for sharing!

    I also had to run

    sudo firewall-cmd --add-service=http
    sudo firewall-cmd --add-service=https

    I have been setting up Linux web servers since the late 1990’s I have tried all of the different methods through RedHat based Linuxes. I have always embraced SELinux, though I have cursed it many times.

    This tutorial led me for the first time to create and use the enabled sites directory and stay out of the default Apache directory. since I am setting up a development server at this time I liked using the “setsebool -P httpd_unified 1” command. This command was the big deal for me in this tutorial.

    Thanks for your efforts, you did a great job.

    It’s counter-intuitive to include “sudo” in any of the commands in this (and any other digital ocean) tutorial(s). If I/we have access to install/start/stop apache or edit vhosts, I don’t need to use sudo.

    Try DigitalOcean for free

    Click below to sign up and get $200 of credit to try our products over 60 days!

    Sign up

    Join the Tech Talk
    Success! Thank you! Please check your email for further details.

    Please complete your information!

    Featured on Community

    Get our biweekly newsletter

    Sign up for Infrastructure as a Newsletter.

    Hollie's Hub for Good

    Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

    Become a contributor

    Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

    Welcome to the developer cloud

    DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

    Learn more
    DigitalOcean Cloud Control Panel