Let’s Encrypt is a Certificate Authority (CA) that provides a way to obtain and install free TLS/SSL certificates, thereby enabling encrypted HTTPS on web servers. It streamlines the process by providing a software client, Certbot, that attempts to automate most (if not all) of the required steps. Currently, the entire process of obtaining and installing a certificate is fully automated on both Apache and Nginx.
In this tutorial, you will use Certbot to obtain a free SSL certificate for Nginx on Ubuntu 18.04 and set up your certificate to renew automatically.
This tutorial will use a separate Nginx server block file instead of the default file. We recommend creating new Nginx server block files for each domain because it helps to avoid common mistakes and maintains the default files as a fallback configuration.
To follow this tutorial, you will need:
One Ubuntu 18.04 server set up by following this initial server setup for Ubuntu 18.04 tutorial, including a sudo non-root user and a firewall.
Both of the following DNS records set up for your server. You can follow this introduction to DigitalOcean DNS for details on how to add them.
your_domainpointing to your server’s public IP address.
www.your_domainpointing to your server’s public IP address.
Nginx installed by following How To Install Nginx on Ubuntu 18.04. Be sure that you have a server block for your domain. Again, this tutorial will use
/etc/nginx/sites-available/your_domain as an example.
The first step to using Let’s Encrypt to obtain an SSL certificate is to install the Certbot software on your server.
The Certbot project recommends that most users install the software through
snap, a package manager originally developed by Canonical (the company behind Ubuntu) and now available on many Linux distributions:
- sudo snap install --classic certbot
Your output will display the current version of Certbot and successful installation:
Outputcertbot 1.21.0 from Certbot Project (certbot-eff✓) installed
Next, create a symbolic link to the newly installed
/snap/bin/certbot executable from the
/usr/bin/ directory. This will ensure that the
certbot command can run correctly on your server. To do this, run the following
ln command. This contains the
-s flag which will create a symbolic or soft link, as opposed to a hard link:
- sudo ln -s /snap/bin/certbot /usr/bin/certbot
Certbot is now ready to use, but in order for it to configure SSL for Nginx, you need to verify some of Nginx’s configuration.
Certbot needs to be able to find the correct
server block in your Nginx configuration for it to be able to automatically configure SSL. Specifically, it does this by searching for a
server_name directive that matches the domain you request a certificate for.
If you followed the recommended server block set up step in the Nginx installation tutorial, you will have a server block for your domain at
/etc/nginx/sites-available/your_domain with the
server_name directive already set appropriately.
To check, open the server block file for your domain using
nano or your favorite text editor:
- sudo nano /etc/nginx/sites-available/your_domain
Find the existing
server_name line. It should look like the following:
... server_name your_domain www.your_domain; ...
If it does, exit your editor and move on to the next step.
If it doesn’t, update it to match. Then save the file and quit your editor. If you’re using
nano you can do this by pressing
CTRL + X then
Now verify the syntax of your configuration edits:
- sudo nginx -t
If you get an error, reopen the server block file and check for any typos or missing characters. Once your configuration file’s syntax is correct, reload Nginx to load the new configuration:
- sudo systemctl reload nginx
Certbot can now find the correct
server block and update it.
Next, you’ll update the firewall to allow HTTPS traffic.
If you have the
ufw firewall enabled, as recommended by the prerequisite guides, you’ll need to adjust the settings to allow for HTTPS traffic. Luckily, Nginx registers a few profiles with
ufw upon installation.
You can check the current setting by running the following:
- sudo ufw status
You should receive output like this, indicating that only HTTP traffic is allowed to the web server:
OutputStatus: active To Action From -- ------ ---- OpenSSH ALLOW Anywhere Nginx HTTP ALLOW Anywhere OpenSSH (v6) ALLOW Anywhere (v6) Nginx HTTP (v6) ALLOW Anywhere (v6)
To let in additional HTTPS traffic, allow the Nginx Full profile and delete the redundant Nginx HTTP profile allowance:
- sudo ufw allow 'Nginx Full'
- sudo ufw delete allow 'Nginx HTTP'
Now when you run the
ufw status command it will reflect these new rules:
- sudo ufw status
OutputStatus: active To Action From -- ------ ---- OpenSSH ALLOW Anywhere Nginx Full ALLOW Anywhere OpenSSH (v6) ALLOW Anywhere (v6) Nginx Full (v6) ALLOW Anywhere (v6)
Next, you’ll run Certbot and fetch your certificates.
Certbot provides a variety of ways to obtain SSL certificates through plugins. The Nginx plugin will take care of reconfiguring Nginx and reloading the configuration whenever necessary. To use this plugin, run the following:
- sudo certbot --nginx -d your_domain -d your_domain
certbot with the
--nginx plugin, using
-d to specify the names you’d like the certificate to be valid for.
If this is your first time running
certbot, you will be prompted to enter an email address and agree to the terms of service. After doing so,
certbot will communicate with the Let’s Encrypt server to request a certificate for your domain. If successful, you will receive the following output:
OutputSuccessfully received certificate. Certificate is saved at: /etc/letsencrypt/live/your_domain/fullchain.pem Key is saved at: /etc/letsencrypt/live/your_domain/privkey.pem This certificate expires on 2022-01-27. These files will be updated when the certificate renews. Certbot has set up a scheduled task to automatically renew this certificate in the background. Deploying certificate Successfully deployed certificate for your_domain to /etc/nginx/sites-enabled/your_domain Successfully deployed certificate for www.your_domain to /etc/nginx/sites-enabled/your_domain Congratulations! You have successfully enabled HTTPS on https://your_domain and https://www.your_domain - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - If you like Certbot, please consider supporting our work by: * Donating to ISRG / Let's Encrypt: https://letsencrypt.org/donate * Donating to EFF: https://eff.org/donate-le - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Your certificates are downloaded, installed, and loaded. Try reloading your website using
https:// and notice your browser’s security indicator. It should indicate that the site is properly secured, usually with a green lock icon. If you test your server using the SSL Labs Server Test, it will get an A grade.
Now that you’ve obtained your SSL certificate, the final step is to test the renewal process.
Let’s Encrypt’s certificates are only valid for ninety days. This is to encourage users to automate their certificate renewal process. The
certbot package you installed takes care of this by adding a renew script to
/etc/cron.d. This script runs twice a day and will automatically renew any certificate that’s within thirty days of expiration.
To test the renewal process, you can do a dry run with
- sudo certbot renew --dry-run
If you don’t receive errors, you’re all set. When necessary, Certbot will renew your certificates and reload Nginx to pick up the changes. If the automated renewal process ever fails, Let’s Encrypt will send a message to the email you specified, warning you when your certificate is about to expire.
In this tutorial, you installed the Let’s Encrypt client
certbot, downloaded SSL certificates for your domain, configured Nginx to use these certificates, and set up automatic certificate renewal. If you have further questions about using Certbot, their documentation is a good place to start.
Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.