Accurate timekeeping has become a critical component of modern software deployments. Whether it’s making sure logs are recorded in the right order or database updates are applied correctly, out-of-sync time can cause errors, data corruption, and other hard to debug issues.
Debian 9 has time synchronization built in and activated by default using the standard ntpd time server, provided by the
ntp package. In this article we will look at some basic time-related commands, verify that ntpd is active and connected to peers, and learn how to activate the alternate systemd-timesyncd network time service.
Before starting this tutorial, you will need a Debian 9 server with a non-root, sudo-enabled user, as described in this Debian 9 server setup tutorial.
The most basic command for finding out the time on your server is
date. Any user can type this command to print out the date and time:
OutputTue Sep 4 17:51:49 UTC 2018
Most often your server will default to the UTC time zone, as highlighted in the above output. UTC is Coordinated Universal Time, the time at zero degrees longitude. Consistently using Universal Time reduces confusion when your infrastructure spans multiple time zones.
If you have different requirements and need to change the time zone, you can use the
timedatectl command to do so.
First, list the available time zones:
- timedatectl list-timezones
A list of time zones will print to your screen. You can press
SPACE to page down, and
b to page up. Once you find the correct time zone, make note of it then type
q to exit the list.
Now set the time zone with
timedatectl set-timezone, making sure to replace the highlighted portion below with the time zone you found in the list. You’ll need to use
timedatectl to make this change:
- sudo timedatectl set-timezone America/New_York
You can verify your changes by running
OutputTue Sep 4 13:52:57 EDT 2018
The time zone abbreviation should reflect the newly chosen value.
Now that we know how to check the clock and set time zones, let’s make sure our time is being synchronized properly.
By default, Debian 9 runs the standard ntpd server to keep your system time synchronized with a pool of external time servers. We can check that it’s running with the
- sudo systemctl status ntp
Output● ntp.service - LSB: Start NTP daemon Loaded: loaded (/etc/init.d/ntp; generated; vendor preset: enabled) Active: active (running) since Tue 2018-09-04 15:07:03 EDT; 30min ago Docs: man:systemd-sysv-generator(8) Process: 876 ExecStart=/etc/init.d/ntp start (code=exited, status=0/SUCCESS) Tasks: 2 (limit: 4915) CGroup: /system.slice/ntp.service └─904 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 105:109 . . .
active (running) status indicates that ntpd started up properly. To get more information about the status of ntpd we can use the
- ntpq -p
Outputremote refid st t when poll reach delay offset jitter ============================================================================== 0.debian.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 1.debian.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 2.debian.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 3.debian.pool.n .POOL. 16 p - 64 0 0.000 0.000 0.000 -eterna.binary.n 184.108.40.206 2 u 240 256 377 35.392 0.142 0.211 -static-96-244-9 192.168.10.254 2 u 60 256 377 10.242 1.297 2.412 +minime.fdf.net 220.127.116.11 3 u 99 256 377 24.042 0.128 0.250 *t1.time.bf1.yah 18.104.22.168 2 u 31 256 377 11.112 0.621 0.186 +x.ns.gin.ntt.ne 249.224.99.213 2 u 108 256 377 1.290 -0.073 0.132 -ord1.m-d.net 22.214.171.124 2 u 473 512 377 19.930 -1.764 0.293
ntpq is a query tool for ntpd. The
-p flag asks for information about the NTP servers (or peers) ntpd is connected to. Your output will be slightly different, but should list the default Debian pool servers plus a few others. Bear in mind that it can take a few minutes for ntpd to establish connections.
It is possible to use systemd’s built-in timesyncd component to replace ntpd. timesyncd is a lighter-weight alternative to ntpd that is more integrated with systemd. Note however that it doesn’t support running as a time server, and it is slightly less sophisticated in the techniques it uses to keep your system time in sync. If you are running complex real-time distributed systems, you may want to stick with ntpd.
To use timesyncd, we must first uninstall ntpd:
- sudo apt purge ntp
Then, start up the timesyncd service:
- sudo systemctl start systemd-timesyncd
Finally, check the status of the service to make sure it’s running:
- sudo systemctl status systemd-timesyncd
Output● systemd-timesyncd.service - Network Time Synchronization Loaded: loaded (/lib/systemd/system/systemd-timesyncd.service; enabled; vendor preset: enabled) Drop-In: /lib/systemd/system/systemd-timesyncd.service.d └─disable-with-time-daemon.conf Active: active (running) since Tue 2018-09-04 16:14:23 EDT; 1s ago Docs: man:systemd-timesyncd.service(8) Main PID: 3399 (systemd-timesyn) Status: "Synchronized to time server 126.96.36.199:123 (0.debian.pool.ntp.org)." Tasks: 2 (limit: 4915) CGroup: /system.slice/systemd-timesyncd.service └─3399 /lib/systemd/systemd-timesyncd
We can use
timedatectl to print out systemd’s current understanding of the time:
OutputLocal time: Tue 2018-09-04 16:15:34 EDT Universal time: Tue 2018-09-04 20:15:34 UTC RTC time: Tue 2018-09-04 20:15:33 Time zone: America/New_York (EDT, -0400) Network time on: yes NTP synchronized: yes RTC in local TZ: no
This prints out the local time, universal time (which may be the same as local time, if you didn’t switch from the UTC time zone), and some network time status information.
Network time on: yes means that timesyncd is enabled, and
NTP synchronized: yes indicates that the time has been successfully synced.
In this article we’ve shown how to view the system time, change time zones, work with ntpd, and switch to systemd’s timesyncd service. If you have more sophisticated timekeeping needs than what we’ve covered here, you might refer to the offical NTP documentation, and also take a look at the NTP Pool Project, a global group of volunteers providing much of the world’s NTP infrastructure.
If you’ve enjoyed this tutorial and our broader community, consider checking out our DigitalOcean products which can also help you achieve your development goals.