Tutorial

How To Set Up Time Synchronization on Ubuntu 12.04

Published on October 3, 2012
How To Set Up Time Synchronization on Ubuntu 12.04
Not using Ubuntu 12.04?Choose a different version or distribution.
Ubuntu 12.04

Status: Deprecated

This article covers a version of Ubuntu that is no longer supported. If you are currently operate a server running Ubuntu 12.04, we highly recommend upgrading or migrating to a supported version of Ubuntu:

Reason: Ubuntu 12.04 reached end of life (EOL) on April 28, 2017 and no longer receives security patches or updates. This guide is no longer maintained.

See Instead:
This guide might still be useful as a reference, but may not work on other Ubuntu releases. If available, we strongly recommend using a guide written for the version of Ubuntu you are using. You can use the search functionality at the top of the page to find a more recent version.

About NTP

Launching a new virtual private server provides the user with a clock. You can see the time on your server with the command, date. Furthermore, you can adjust the server’s time zone, if needed, with the command export TZ=America/New_York,modifying the time zone to match your location.

Although the built in clock is helpful for keeping track of events on the server itself, it may begin to cause issues if the virtual server has to work with external machines. Emails sent out from a misconfigured server may arrive 3 minutes in the past on another, or users granted access only at certain times of the day, may find themselves blocked because of a time mismatch.

In order to resolve this, servers can be synced using the NTP protocol, matching their time to a reference time that servers around the world agree upon. This can be set up by installing the ntp daemon on the VPS— the program will automatically, slowly shift the server clock to match the reference one. Another method of fixing the time is to run ntpdate which automatically matches the time on the server with that of the central time. However, ntpdate is not an action that should be taken regularly because it syncs the virtual server’s time so quickly, the jump in time may cause issues with time sensitive software. Therefore, it is best to run this only once, prior to setting up NTP, and then let NTP take over—otherwise, if the server’s time is too far off, NTP may not launch altogether.

sudo ntpdate pool.ntp.org

NTP needs port 123 to be open in order to work.

Step One— Install the NTP daemon

The easiest way to ensure that your time remains up to date is to install the Network Time Protocol daemon.

You can download it from apt-get.

sudo apt-get install ntp

Step Two— Configure the NTP Servers

Once the program is installed, open up the configuration file:

sudo nano /etc/ntp.conf

Find the section within the configuration that lists the NTP Pool Project servers. The section will look like this:

server 0.ubuntu.pool.ntp.org
server 1.ubuntu.pool.ntp.org
server 2.ubuntu.pool.ntp.org
server 3.ubuntu.pool.ntp.org

Each line then refers to a set of hourly-changing random servers that provide your server with the correct time. The servers that are set up are located all around the world, and you can see the details of the volunteer servers that provide the time with the

 ntpq -p

command. You should see something like the following:

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
-mail.fspproduct 209.51.161.238   2 u   50  128  377    1.852    2.768   0.672
*higgins.chrtf.o 18.26.4.105      2 u  113  128  377   14.579   -0.408   2.817
+mdnworldwide.co 108.71.253.18    2 u   33  128  377   47.309   -0.572   1.033
-xen1.rack911.co 209.51.161.238   2 u   44  128  377   87.449   -5.716   0.605
+europium.canoni 193.79.237.14    2 u  127  128  377   75.755   -2.797   0.718

Although these servers will accomplish the task of setting and maintaining server time, you set your time much more effectively by limiting the ntp to the ones in your region (europe, north-america, oceania or asia), or even to the ones in your country, for example in America:

 us.pool.ntp.org

You can find the list international country codes (although not all of the countries have codes) here

Once all of the information is in the configuration file, restart ntp:

sudo service ntp restart

NTP will slowly start to adjust the virtual private server’s time.

By Etel Sverdlov

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

sudo dpkg-reconfigure tzdata

Thanks @mishatatinets

To test the configuration change the time

sudo date --set="2017-01-25 15:21:10.990"

Then restart the service

 sudo service ntp stop
 sudo ntpd -gq
 sudo service ntp start

If you run the following command, you will get screen and you can set the timezone you wish for your droplet.

dpkg-reconfigure tzdata

Thanks for this. I just want to know what if I want an US time server synchronization for the server? Should I replace the line server 0.ubuntu.pool.ntp.org by 0.us.pool.ntp.org? And then restart ntp?

Sorry this manual did not solved the problem, in my case I just run cp /usr/share/zoneinfo/Europe/Madrid /etc/localtime

Thanks for that, it was annoying as anything that the system was on EST and so all my logs and stats were off by 5 hours

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
September 28, 2013

@yungchin: I believe you would need to install it on the VM as well.

Just wondering - if the host machine runs NTP, would the VMs still need to run it too?

If you need change a timezone for the server you can use sudo dpkg-reconfigure tzdata

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
July 4, 2013

@Pablo: Do you have any iptables rules set up? Try flushing them and running ntpq -p again.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more