How To Set Up uWSGI and Nginx to Serve Python Apps on Ubuntu 14.04

How To Set Up uWSGI and Nginx to Serve Python Apps on Ubuntu 14.04


In this guide, we will be setting up a simple WSGI application served by uWSGI. We will use the Nginx web server as a reverse proxy to the application server to provide more robust connection handling. We will be installing and configuring these components on an Ubuntu 14.04 server.

Definitions and Concepts

Clarifying Some Terms

Before we jump in, we should address some confusing terminology associated with the interrelated concepts we will be dealing with. These three separate terms that appear interchangeable, but actually have distinct meanings:

  • WSGI: A Python spec that defines a standard interface for communication between an application or framework and an application/web server. This was created in order to simplify and standardize communication between these components for consistency and interchangeability. This basically defines an API interface that can be used over other protocols.
  • uWSGI: An application server container that aims to provide a full stack for developing and deploying web applications and services. The main component is an application server that can handle apps of different languages. It communicates with the application using the methods defined by the WSGI spec, and with other web servers over a variety of other protocols. This is the piece that translates requests from a conventional web server into a format that the application can process.
  • uwsgi: A fast, binary protocol implemented by the uWSGI server to communicate with a more full-featured web server. This is a wire protocol, not a transport protocol. It is the preferred way to speak to web servers that are proxying requests to uWSGI.

WSGI Application Requirements

The WSGI spec defines the interface between the web server and application portions of the stack. In this context, “web server” refers to the uWSGI server, which is responsible for translating client requests to the application using the WSGI spec. This simplifies communication and creates loosely coupled components so that you can easily swap out either side without much trouble.

The web server (uWSGI) must have the ability to send requests to the application by triggering a defined “callable”. The callable is simply an entry point into the application where the web server can call a function with some parameters. The expected parameters are a dictionary of environmental variables and a callable provided by the web server (uWSGI) component.

In response, the application returns an iterable that will be used to generate the body of the client response. It will also call the web server component callable that it received as a parameter. The first parameter when triggering the web server callable will be the HTTP status code and the second will be a list of tuples, each of which define a response header and value to send back to the client.

With the “web server” component of this interaction provided by uWSGI in this instance, we will only need to make sure our applications have the qualities described above. We will also set up Nginx to handle actual client requests and proxy them to the uWSGI server.

Install the Components

To get started, we will need to install the necessary components on our Ubuntu 14.04 server. We can mainly do this using apt and pip.

First, refresh your apt package index and then install the Python development libraries and headers, the pip Python package manager, and the Nginx web server and reverse proxy:

sudo apt-get update
sudo apt-get install python-dev python-pip nginx

Once the package installation is complete, you will have access to the pip Python package manager. We can use this to install the virtualenv package, which we will use to isolate our application’s Python environment from any others that may exist on the system:

sudo pip install virtualenv

Once this is complete, we can begin to create the general structure for our application. We will create the virtual environment discussed above and will install the uWSGI application server within this environment.

Set up an App Directory and a Virtualenv

We will start by creating a folder for our app. This can hold a nested folder containing the actual application code in a more complete application. For our purposes, this directory will simply hold our virtual environment and our WSGI entry point:

mkdir ~/myapp/

Next, move into the directory so that we can set up the environment for our application:

cd ~/myapp

Create a virtual environment with the virtualenv command. We will call this myappenv for simplicity:

virtualenv myappenv

A new Python environment will be set up under a directory called myappenv. We can activate this environment by typing:

source myappenv/bin/activate

Your prompt should change to indicate that you are now operating within the virtual environment. It will look something like this:


If you wish to leave this environment at any time, you can simply type:


If you have deactivated your environment, re-activate it again to continue with the guide.

With this environment active, any Python packages installed will be contained within this directory hierarchy. They will not interfere with the system’s Python environment. With this in mind, we can now install the uWSGI server into our environment using pip. The package for this is called uwsgi (this is still the uWSGI server and not the uwsgi protocol):

pip install uwsgi

You can verify that it is now available by typing:

uwsgi --version

If it returns a version number, the uWSGI server is available for use.

Create a WSGI Application

Next, we will create an incredibly simple WSGI application using the WSGI specification requirements we discussed earlier. To reiterate, the application component that we must provide should have the following properties:

  • It must provide an interface through a callable (a function or other language construct that can be called)
  • The callable must take as parameters a dictionary containing environmental variable-like key-value pairs and a callable that is accessible on the server (uWSGI).
  • The application’s callable should return an iterable that will produce the body to send the client.
  • The application should call the web server’s callable with the HTTP status and request headers.

We will write our application in a file called wsgi.py in our application directory:

nano ~/myapp/wsgi.py

Inside of this file, we will create the simplest WSGI compliant application we can. As with all Python code, be sure to pay attention to the indentation:

def application(environ, start_response):
    start_response('200 OK', [('Content-Type', 'text/html')])
    return ["<h1 style='color:blue'>Hello There!</h1>"]

The above code constitutes a complete WSGI application. By default, uWSGI will look for a callable called application, which is why we called our function application. As you can see, it takes two parameters.

The first we called environ because it will be an environmental variable-like key-value dictionary. The second is called start_response and is the name the app will use internally to refer to the web server (uWSGI) callable that is sent in. Both of these parameter names were simply selected because of their use in the examples in the PEP 333 spec that defines WSGI interactions.

Our application must take this information and do two things. First, it must call the callable it received with an HTTP status code and any headers it wants to send back. In this case, we are sending a “200 OK” response and setting the Content-Type header to text/html.

Secondly, it needs to return with an iterable to use as the response body. Here, we’ve just used a list containing a single string of HTML. Strings are iterable as well, but inside of a list, uWSGI will be able to process the entire string with one iteration.

In a real world scenario, this file would likely be used as a link to the rest of your application code. For instance, Django projects include a wsgi.py file by default that translates requests from the web server (uWSGI) to the application (Django). The simplified WSGI interface stays the same regardless of how complex the actual application code is. This is one of the strengths of the interface.

Save and close the file when you are finished.

To test out the code, we can start up uWSGI. We will tell it to use HTTP for the time being and to listen on port 8080. We will pass it the name of the script (suffix removed):

uwsgi --socket --protocol=http -w wsgi

Now, if you visit your server’s IP address or domain name in your web browser followed by :8080, you should see the first level header text we passed as the body in our wsgi.py file:

wsgi application example

Stop the server with CTRL-C when you have verified that this works.

We’re done with designing our actual application at this point. You can deactivate our virtual environment if you desire:


Configure a uWSGI Config File

In the above example, we manually started the uWSGI server and passed it some parameters on the command line. We can avoid this by creating a configuration file. The uWSGI server can read configurations in a variety of formats, but we will use the .ini format for simplicity.

To continue with the naming we’ve been using thus far, we’ll call the file myapp.ini and place it in our application folder:

nano ~/myapp/myapp.ini

Inside, we need to establish a section called [uwsgi]. This section is where all of our configuration items will live. We’ll start by identifying our application. The uWSGI server needs to know where the application’s callable is. We can give the file and the function within:

module = wsgi:application

We want to mark the initial uwsgi process as a master and then spawn a number of worker processes. We will start with five workers:

module = wsgi:application

master = true
processes = 5

We are actually going to change the protocol that uWSGI uses to speak with the outside world. When we were testing our application, we specified --protocol=http so that we could see it from a web browser. Since we will be configuring Nginx as a reverse proxy in front of uWSGI, we can change this. Nginx implements a uwsgi proxying mechanism, which is a fast binary protocol that uWSGI can use to talk with other servers. The uwsgi protocol is actually uWSGI’s default protocol, so simply by omitting a protocol specification, it will fall back to uwsgi.

Since we are designing this config for use with Nginx, we’re also going to change from using a network port and use a Unix socket instead. This is more secure and faster. The socket will be created in the current directory if we use a relative path. We’ll call it myapp.sock. We will change the permissions to “664” so that Nginx can write to it (we will be starting uWSGI with the www-data group that Nginx uses. We’ll also add the vacuum option, which will remove the socket when the process stops:

module = wsgi:application

master = true
processes = 5

socket = myapp.sock
chmod-socket = 664
vacuum = true

We need one final option since we will be creating an Upstart file to start our application at boot. Upstart and uWSGI have different ideas about what the SIGTERM signal should do to an application. To sort out this discrepancy so that the processes can be handled as expected with Upstart, we just need to add an option called die-on-term so that uWSGI will kill the process instead of reloading it:

module = wsgi:application

master = true
processes = 5

socket = myapp.sock
chmod-socket = 664
vacuum = true

die-on-term = true

Save and close the file when you are finished. This configuration file is now set to be used with an Upstart script.

Create an Upstart File to Manage the App

We can launch a uWSGI instance at boot so that our application is always available. We will place this in the /etc/init directory that Upstart checks. We’ll be calling this myapp.conf:

sudo nano /etc/init/myapp.conf

First, we can start out with a description of the service and pick out the system runlevels where it should automatically run. The standard user runlevels are 2 through 5. We will tell Upstart to stop the service when it’s on any runlevel outside of this group (such as when the system is rebooting or in single user mode):

description "uWSGI instance to serve myapp"

start on runlevel [2345]
stop on runlevel [!2345]

Next, will tell Upstart about which user and group to run the process as. We want to run the application under our own account (we’re using demo in this guide, but you should substitute your own user). We want to set the group to the www-data user that Nginx uses however. This is necessary because the web server needs to be able to read and write to the socket that our .ini file will create:

description "uWSGI instance to serve myapp"

start on runlevel [2345]
stop on runlevel [!2345]

setuid demo
setgid www-data

Next, we’ll run the actual commands to start uWSGI. Since we installed uWSGI into a virtual environment, we have some extra work to do. We could just provide the entire path to the uWSGI executable, but instead, we will activate the virtual environment. This would make it easier if we were relying on additional software installed in the environment.

To do this, we’ll use a script block. Inside, we’ll change to our application directory, activate the virtual environment (we must use . in scripts instead of source), and start the uWSGI instance pointing at our .ini file:

description "uWSGI instance to serve myapp"

start on runlevel [2345]
stop on runlevel [!2345]

setuid demo
setgid www-data

    cd /home/demo/myapp
    . myappenv/bin/activate
    uwsgi --ini myapp.ini
end script

With that, our Upstart script is complete. Save and close the file when you are finished.

Now, we can start the service by typing:

sudo start myapp

We can verify that that it was started by typing:

ps aux | grep myapp
demo   14618  0.0  0.5  35868  5996 ?        S    15:02   0:00 uwsgi --ini myapp.ini
demo   14619  0.0  0.5  42680  5532 ?        S    15:02   0:00 uwsgi --ini myapp.ini
demo   14620  0.0  0.5  42680  5532 ?        S    15:02   0:00 uwsgi --ini myapp.ini
demo   14621  0.0  0.5  42680  5532 ?        S    15:02   0:00 uwsgi --ini myapp.ini
demo   14622  0.0  0.5  42680  5532 ?        S    15:02   0:00 uwsgi --ini myapp.ini
demo   14623  0.0  0.5  42680  5532 ?        S    15:02   0:00 uwsgi --ini myapp.ini
demo   15520  0.0  0.0  11740   936 pts/0    S+   15:53   0:00 grep --color=auto myapp

This will start automatically on boot. You can stop the service at any time by typing:

sudo stop myapp

Configure Nginx to Proxy to uWSGI

At this point, we have a WSGI app and have verified that uWSGI can read and serve it. We have created a configuration file and an Upstart script. Our uWSGI process will listen on a socket and communicate using the uwsgi protocol.

We’re now at the point where we can work on configuring Nginx as a reverse proxy. Nginx has the ability to proxy using the uwsgi protocol for communicating with uWSGI. This is a faster protocol than HTTP and will perform better.

The Nginx configuration that we will be setting up is extremely simple. Create a new file within the sites-available directory within Nginx’s configuration hierarchy. We will call our file myapp to match the app name we have been using:

sudo nano /etc/nginx/sites-available/myapp

Within this file, we can specify the port number and the domain name that this server block should respond to. In our case, we’ll be using the default port 80:

server {
    listen 80;
    server_name server_domain_or_IP;

Since we wish to send all requests on this domain or IP address to our WSGI application, we will create a single location block for requests beginning with /, which should match everything. Inside, we will use the include directive to include a number of parameters with reasonable defaults from a file in our Nginx configuration directory. The file containing these is called uwsgi_params. Afterwards, we will pass the traffic to our uWSGI instance over the uwsgi protocol. We will use the unix socket that we configured earlier:

server {
    listen 80;
    server_name server_domain_or_IP;

    location / {
        include         uwsgi_params;
        uwsgi_pass      unix:/home/demo/myapp/myapp.sock;

That is actually all we need for a simple application. There are some improvements that could be made for a more complete application. For instance, we might define a number of upstream uWSGI servers outside of this block and then pass them to that. We might include some more uWSGI parameters. We might also handle any static files from Nginx directly and pass only dynamic requests to the uWSGI instance.

We do not need any of those features in our three-line app though, so we can save and close the file.

Enable the server configuration we just made by linking it to the sites-enabled directory:

sudo ln -s /etc/nginx/sites-available/myapp /etc/nginx/sites-enabled

Check the configuration file for syntax errors:

sudo service nginx configtest

If it reports back that no problems were detected, restart the server to implement your changes:

sudo service nginx restart

Once Nginx restarts, you should be able to go to your server’s domain name or IP address (without a port number) and see the application you configured:

full WSGI app


If you’ve made it this far, you’ve created a simple WSGI application and have some insight into how more complex applications would need to be designed. We have installed the uWSGI application container/server into a purpose-made virtual environment to serve our application. We’ve made a configuration file and an Upstart script to automate this process. In front of the uWSGI server, we’ve set up an Nginx reverse proxy that can speak to the uWSGI process using the uwsgi wire protocol.

You can easily see how this can be expanded when setting up an actual production environment. For instance, uWSGI has the ability to manage multiple applications using something called “emperor mode”. You can expand the Nginx configuration to load balance between uWSGI instances, or to handle static files for your application. When serving multiple applications, it may be in your best interest to install uWSGI globally instead of in a virtual environment, depending on your needs. The components are all fairly flexible, so you should be able to tweak their configuration to accommodate many different scenarios.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Great article. thanks.

in UWSGI ini, I had to do a bit of changes to get it up and running.

module = wsgi

http-socket = :8080

master = true
processes = 5

socket = /tmp/demoapp.sock

chmod-socket = 660
vacuum = true
die-on-term = true

HTTP port needed to be specified. Also I had to put my socket in the tmp folder

Quick tip, if you’re on Ubuntu 15.10 or a droplet that uses systemd (rather than Upstart, as Ubuntu 14.04 uses) then this tutorial are more helpful for making the .ini and .service files.

Hi, Thank you for this informative tutorial.

I followed all the steps but I got stuck at “sudo start myapp”, my app name is phoneApp and I am getting this error “phoneApp: unrecognized service”.

I will appreciate your help.

return ["<h1 style='color:blue'>Hello There!</h1>"]

doesnt work! you should do return b"<h1 style='color:blue'>Hello There!</h1>"

It listens to 1 port. how about 2 ports? say 5001? Eg second code to listen to is,

from flask import Flask
application = Flask(__name__)

def hello():
    return "<h1 style='color:red'>Hi There!</h1>"

if __name__ == "__main__":

and wsgi2.py is ,

from myproject2 import application

if __name__ == "__main__":

is there any example using bjoern instead of uwsgi or gunicorn?


I am going through this tutorial and everything seems to work up until Upstart file configuration. Now, I have learned that Upstart is no longer supported by Ubuntu but I can not seem to make Systemd to work properly. Could anyone, please, help me with Systemd configuration?

I appreciate the guide. I receive an error when using ‘sudo start myuwsgi’ (I named my dir myuwsgi). The error is ‘start: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused’

I had to use apt-get install upstart to use the ‘start’ command.

Please help. Thank you

when I run the first uwsgi command and then go to my server ip followed by :8080 it doesn’t load the ‘Hello there’ text, it doesn’t give an error either it just seems to be loading something but very slow and stays like this, in my terminal it seems that uwsgi is running fine and there are no errors.

What am I doing wrong here?

EDIT: I had a firewall setup from a previous tutorial and needed to allow port 8080

Thanks for giving such good advice on setting up python apps on ubuntu. I am having an issue with displaying the app once the nginx files have been updated. Just clarify for me, writing the myapp file in /nginx/sites is going to run when nginx starts? Im getting the default nginx page when I type in the ip address into the browser, even though I have set up the myapp file in sites-available and enabled

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel