How To Use Environment Files with env-cmd

Updated on April 16, 2021


How To Use Environment Files with env-cmd


Environment variables allow you to switch between your local development, testing, staging, user acceptance testing (UAT), production, and any other environments that are part of your project’s workflow.

Instead of passing variables into your scripts individually, env-cmd lets you group variables into an environment file (.env) and pass them to your script.

In this article, you will install and use env-cmd in an example project.


To complete this tutorial, you will need:

Note: This tutorial has been updated to use the commands for env-cmd after version 9.0.0.

This tutorial was verified with Node v15.14.0, npm v7.10.0, and env-cmd v10.0.1.

Step 1 – Setting Up the Project

This tutorial assumes you have a new project. Create a new directory:

  1. mkdir env-cmd-example

Then navigate to the directory:

  1. cd env-cmd-example

It is generally considered a bad practice to commit your environment files to your version control system. If the repository is forked or shared, the credentials will be available to others as they will be forever recorded in the project history.

It is recommended to add the file to your .gitignore.

Note: This will not be required for the scope of this tutorial, but is presented here for educational purposes.

Initialize a new git project:

  1. git init

Create a .gitignore file and add the patterns to exclude your environment file:


For this tutorial, you can exclude .env, .env.js, .env.json, .env-cmdrc.

Then, create an .env file for the project.

Open the file in your code editor and add the following line of code:


This defines creature to shark, green to #008f68, yellow to #fae042.

Then, create a new log.js file:

console.log('NODE_ENV:', process.env.NODE_ENV);
console.log('Creature:', process.env.creature);
console.log('Green:', process.env.green);
console.log('Yellow:', process.env.yellow);

This will log the previously defined variables to the console. And it will also print out the NODE_ENV value.

Now, your example is prepared for using environment files with env-cmd.

Step 2 – Using env-cmd

Modern npm and yarn can run env-cmd without making it a dependency.

Use either npx:

  1. npx env-cmd node log.js

Or yarn run:

  1. yarn run env-cmd node log.js

Otherwise, you can install the package as a dependency or devDependency:

  1. npm install env-cmd@10.0.1

The env-cmd package installs an executable script named env-cmd which can be called before your scripts to easily load environment variables from an external file.

Depending on your setup, you can reference env-cmd in a few different ways.

Perhaps the most compatible across package managers is to add a custom script to your package.json file:

  "scripts": {
    "print-log": "env-cmd node log.js"

For example, with npm, you will be able to run this custom script with the following command:

  1. npm run print-log

If you would prefer to use env-cmd directly from the command line, you can call it directly from node_modules:

  1. ./node_modules/.bin/env-cmd node log.js

Going forward, this tutorial will use the npx approach, but all approaches are designed to work similarly.

Now, use one of the approaches in your terminal.

Regardless of how you choose to run the script, env-cmd will load the .env file, and the logging script will report back the variables.

NODE_ENV: undefined Creature: shark Green: #008f68 Yellow: #fae042

You may have noticed that the NODE_ENV value is undefined. That’s because NODE_ENV was not defined in the .env file.

It is possible to pass in NODE_ENV before calling env-cmd.

For example, here is the command for npx:

  1. NODE_ENV=development npx env-cmd node log.js

Run the command again with the NODE_ENV defined:

NODE_ENV: development Creature: shark Green: #008f68 Yellow: #fae042

At this point, you have learned to use env-cmd with an .env file.

Step 3 – Using Different File Formats

env-cmd by default expects an .env file in the project root directory. However, you can change the file type and path with the --file (-f) option.

Regardless of how you reference it, you have a wide variety of file formats available to store your environment variables.


Here is an example of an .env.json file:

  "creature": "shark",
  "green": "#008f68",
  "yellow": "#fae042"

And here is an example of using this file with env-cmd:

  1. NODE_ENV=development npx env-cmd --file .env.json node log.js

Now you have learned how to use a JSON environment file.


Here is an example of an .env.js file:

module.exports = {
  creature: 'shark',
  green: '#008f68',
  yellow: '#fae042'

And here is an example of using this file with env-cmd:

  1. NODE_ENV=development npx env-cmd --file .env.js node log.js

Now you have learned how to use a JavaScript environment file.

RC File

The rc file format is special because it allows you to define multiple environments in a single JSON file and reference the environment by name instead of by file.

The “runcom” file is also special in that it must be named .env-cmdrc and be present at the root of your project.

Here is an example of an .env-cmdrc file with environments defined for development, staging, and production:

  "development": {
    "NODE_ENV": "development",
    "creature": "shark",
    "green": "#008f68",
    "yellow": "#fae042",
    "otherVar1": 1
  "staging": {
    "NODE_ENV": "staging",
    "creature": "whale",
    "green": "#6db65b",
    "yellow": "#efbb35",
    "otherVar2": 2
  "production": {
    "NODE_ENV": "production",
    "creature": "octopus",
    "green": "#4aae9b",
    "yellow": "#dfa612",
    "otherVar3": 3

Using the .env-cmdrc values will require an --environments (-e) option.

Then you can reference a single environment:

  1. npx env-cmd --environments development node log.js

You can even reference multiple environments, which will merge together each of the environment’s variables, with the last environment taking precedence if there are overlapping variables:

  1. npx env-cmd --environments development,staging,production node log.js

By specifying all three of our environments, each of the otherVar values will be set, with the rest of the variables being sourced from the final environment listed, production.

Step 4 – Using Graceful Fallbacks with --fallback

In situations where a custom environment file is not present:

npx env-cmd -f .env.missing node log.js

env-cmd will throw an error:

Error: Failed to find .env file at path: .env.missing

In situations where there is an unexpected problem with the custom env file path, env-cmd can attempt to load an .env file from the root of your project. To do so, pass in the --fallback flag:

  1. npx env-cmd --file .env.missing --fallback node log.js

Now, if there is a valid .env file to fall back to, this command will not display any errors.

Step 5 – Using Existing Environment Values with --no-override

There are situations where you may want to keep all or some of the variables already set in the environment.

To respect the existing environment variables instead of using the values in your .env file, pass env-cmd the --no-override flag:

  1. NODE_ENV=development creature=squid npx env-cmd --no-override node log.js

This will result in the following output:

NODE_ENV: development Creature: squid Green: #008f68 Yellow: #fae042

Notice that the creature value has been set to squid instead of shark which was defined in the .env file.


In this article, you installed and used env-cmd in an example project.

Using environment files can help you switch between “development” and “production” environments.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors
Default avatar


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Perhaps I’m understanding wrong, but I wouldn’t recommend NOT committing env files to your repo. How would a CI/CD build interpret different API urls for stating or prod for instance? Credentials is what I would suggest to never put in env files, and use some form of secure storage, like AWS Secrets Manager.

Step 1 – Setting Up the Project. This tutorial assumes you have a new project. … Step 2 – Using env-cmd. Modern npm and yarn can run env-cmd without making it a dependency. … Step 3 – Using Different File Formats. … Step 4 – Using Graceful Fallbacks with --fallback. … Step 5 – Using Existing Environment Values with --no-override.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel