Postfix is a popular open-source Mail Transfer Agent (MTA) that can be used to route and deliver email on a Linux system. It is estimated that around 25% of public mail servers on the internet run Postfix.
In this guide, we’ll teach you how to get up and running quickly with Postfix on an Ubuntu 16.04 server.
In order to follow this guide, you should have access to a non-root user with
sudo privileges. You can follow our Ubuntu 16.04 initial server setup guide to create the necessary user.
In order to properly configure Postfix, you will need a Fully Qualified Domain Name pointed at your Ubuntu 16.04 server. You can find help on setting up your domain name with DigitalOcean by following this guide. If you plan on accepting mail, you will need to make sure you have an MX record pointing to your mail server as well.
For the purposes of this tutorial, we will assume that you are configuring a host that has the FQDN of
Postfix is included in Ubuntu’s default repositories, so installation is incredibly simple.
To begin, update your local
apt package cache and then install the software. We will be passing in the
DEBIAN_PRIORITY=low environmental variable into our installation command in order to answer some additional prompts:
- sudo apt-get update
- sudo DEBIAN_PRIORITY=low apt-get install postfix
Use the following information to fill in your prompts correctly for your environment:
mail.example.com, but we probably want to set the system mail name to
example.comso that given the username
user1, Postfix will use the address
postmaster@. Use your primary account for this. In our case, sammy.
To be explicit, these are the settings we’ll use for this guide:
If you need to ever return to re-adjust these settings, you can do so by typing:
- sudo dpkg-reconfigure postfix
The prompts will be pre-populated with your previous responses.
When you are finished, we can now do a bit more configuration to set up our system how we’d like it.
Next, we can adjust some settings that the package did not prompt us for.
To begin, we can set the mailbox. We will use the Maildir format, which separates messages into individual files that are then moved between directories based on user action. The other option is the mbox format (which we won’t cover here) which stores all messages within a single file.
We will set the
home_mailbox variable to
Maildir/ which will create a directory structure under that name within the user’s home directory. The
postconf command can be used to query or set configuration settings. Configure
home_mailbox by typing:
- sudo postconf -e 'home_mailbox= Maildir/'
Next, we can set the location of the
virtual_alias_maps table. This table maps arbitrary email accounts to Linux system accounts. We will create this table at
/etc/postfix/virtual. Again, we can use the
- sudo postconf -e 'virtual_alias_maps= hash:/etc/postfix/virtual'
Next, we can set up the virtual maps file. Open the file in your text editor:
- sudo nano /etc/postfix/virtual
The virtual alias map table uses a very simple format. On the left, you can list any addresses that you wish to accept email for. Afterwards, separated by whitespace, enter the Linux user you’d like that mail delivered to.
For example, if you would like to accept email at
firstname.lastname@example.org and would like to have those emails delivered to the
sammy Linux user, you could set up your file like this:
email@example.com sammy firstname.lastname@example.org sammy
After you’ve mapped all of the addresses to the appropriate server accounts, save and close the file.
We can apply the mapping by typing:
- sudo postmap /etc/postfix/virtual
Restart the Postfix process to be sure that all of our changes have been applied:
- sudo systemctl restart postfix
If you are running the UFW firewall, as configured in the initial server setup guide, we’ll have to allow an exception for Postfix.
You can allow connections to the service by typing:
- sudo ufw allow Postfix
The Postfix server component is installed and ready. Next, we will set up a client that can handle the mail that Postfix will process.
Before we install a client, we should make sure our
In order for the variable to be set regardless of how you access your account (through
sudo, etc.) we need to set the variable in a few different locations. We’ll add it to
/etc/bash.bashrc and a file within
/etc/profile.d to make sure each user has this configured.
To add the variable to these files, type:
- echo 'export MAIL=~/Maildir' | sudo tee -a /etc/bash.bashrc | sudo tee -a /etc/profile.d/mail.sh
To read the variable into your current session, you can source the
- source /etc/profile.d/mail.sh
In order to interact with the mail being delivered, we will install the
s-nail package. This is a variant of the BSD
xmail client, which is feature-rich, can handle the Maildir format correctly, and is mostly backwards compatible. The GNU version of
To install the
s-nail package, type:
- sudo apt-get install s-nail
We should adjust a few settings. Open the
/etc/s-nail.rc file in your editor:
- sudo nano /etc/s-nail.rc
Towards the bottom of the file, add the following options:
. . . set emptystart set folder=Maildir set record=+sent
This will allow the client to open even with an empty inbox. It will also set the
Maildir directory to the internal
folder variable and then use this to create a
sent mbox file within that, for storing sent mail.
Save and close the file when you are finished.
Now, we can test the client out.
The easiest way to create the Maildir structure within our home directory is to send ourselves an email. We can do this with the
sent file will only be available once the Maildir is created, we should disable writing to that for our initial email. We can do this by passing the
Send the email by piping a string to the
- echo 'init' | mail -s 'init' -Snorecord sammy
You should get the following response:
OutputCan't canonicalize "/home/sammy/Maildir"
This is normal and will only show during this first message. We can check to make sure the directory was created by looking for our
- ls -R ~/Maildir
You should see the directory structure has been created and that a new message file is in the
Output/home/sammy/Maildir/: cur new tmp /home/sammy/Maildir/cur: /home/sammy/Maildir/new: 1463177269.Vfd01I40e4dM691221.mail.example.com /home/sammy/Maildir/tmp:
It looks like our mail has been delivered.
Use the client to check your mail:
You should see your new message waiting:
Outputs-nail version v14.8.6. Type ? for help. "/home/sammy/Maildir": 1 message 1 new >N 1 email@example.com Wed Dec 31 19:00 14/369 init
Just hitting ENTER should display your message:
Output[-- Message 1 -- 14 lines, 369 bytes --]: From firstname.lastname@example.org Wed Dec 31 19:00:00 1969 Date: Fri, 13 May 2016 18:07:49 -0400 To: email@example.com Subject: init Message-Id: <20160513220749.A278F228D9@mail.example.com> From: firstname.lastname@example.org init
You can get back to your message list by typing h:
Outputs-nail version v14.8.6. Type ? for help. "/home/sammy/Maildir": 1 message 1 new >R 1 email@example.com Wed Dec 31 19:00 14/369 init
Since this message isn’t very useful, we can delete it with d:
Quit to get back to the terminal by typing q:
You can test sending mail by typing a message in a text editor:
- nano ~/test_message
Inside, enter some text you’d like to email:
Hello, This is a test. Please confirm receipt!
cat command, we can pipe the message to the
-r flag if you want to modify that value to something else:
- cat ~/test_message | mail -s 'Test email subject line' -r from_field_account firstname.lastname@example.org
The options above are:
-s: The subject line of the email
-r: An optional change to the “From:” field of the email. By default, the Linux user you are logged in as will be used to populate this field. The
-roption allows you to override this.
email@example.com: The account to send the email to. Change this to be a valid account you have access to.
You can view your sent messages within your
Afterwards, view your sent messages by typing:
- file +sent
You can manage sent mail using the same commands you use for incoming mail.
You should now have Postfix configured on your Ubuntu 16.04 server. Managing email servers can be a tough task for beginning administrators, but with this configuration, you should have basic MTA email functionality to get you started.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up