Tutorial

How To Install WordPress on CentOS 7

Published on October 30, 2014
How To Install WordPress on CentOS 7

Introduction

WordPress is a free and open source website and blogging tool that uses PHP and MySQL. WordPress is currently the most popular CMS (Content Management System) on the Internet, and has over 20,000 plugins to extend its functionality. This makes WordPress a great choice for getting a website up and running quickly and easily.

In this guide, we will demonstrate how to get a WordPress instance set up with an Apache web server on CentOS 7.

Prerequisites

Before you begin with this guide, there are a few steps that need to be completed first.

You will need a CentOS 7 server installed and configured with a non-root user that has sudo privileges. If you haven’t done this yet, you can run through steps 1-4 in the CentOS 7 initial server setup guide to create this account.

Additionally, you’ll need to have a LAMP (Linux, Apache, MySQL, and PHP) stack installed on your CentOS 7 server. If you don’t have these components already installed or configured, you can use this guide to learn how to install LAMP on CentOS 7.

When you are finished with these steps, you can continue with the installation of WordPress.

Step One — Create a MySQL Database and User for WordPress

The first step that we will take is in preparation. WordPress uses a relational database to manage information for the site and its users. We have MariaDB (a fork of MySQL) installed already, which can provide this functionality, but we need to make a database and a user for WordPress to work with.

To get started, log into MySQL’s root (administrative) account by issuing this command:

mysql -u root -p

You will be prompted for the password that you set for the root account when you installed MySQL. Once that password is submitted, you will be given a MySQL command prompt.

First, we’ll create a new database that WordPress can control. You can call this whatever you would like, but I will be calling it wordpress for this example.

CREATE DATABASE wordpress;

Note: Every MySQL statement or command must end in a semi-colon (;), so check to make sure that this is present if you are running into any issues.

Next, we are going to create a new MySQL user account that we will use exclusively to operate on WordPress’s new database. Creating one-function databases and accounts is a good idea, as it allows for better control of permissions and other security needs.

I am going to call the new account wordpressuser and will assign it a password of password. You should definitely use a different username and password, as these examples are not very secure.

CREATE USER wordpressuser@localhost IDENTIFIED BY 'password';

At this point, you have a database and user account that are each specifically made for WordPress. However, the user has no access to the database. We need to link the two components together by granting our user access to the database.

GRANT ALL PRIVILEGES ON wordpress.* TO wordpressuser@localhost IDENTIFIED BY 'password';

Now that the user has access to the database, we need to flush the privileges so that MySQL knows about the recent privilege changes that we’ve made:

FLUSH PRIVILEGES;

Once these commands have all been executed, we can exit out of the MySQL command prompt by typing:

exit

You should now be back to your regular SSH command prompt.

Step Two — Install WordPress

Before we download WordPress, there is one PHP module that we need to install to ensure that it works properly. Without this module, WordPress will not be able to resize images to create thumbnails. We can get that package directly from CentOS’s default repositories using yum:

sudo yum install php-gd

Now we need to restart Apache so that it recognizes the new module:

sudo service httpd restart

We are now ready to download and install WordPress from the project’s website. Luckily, the WordPress team always links the most recent stable version of their software to the same URL, so we can get the most up-to-date version of WordPress by typing this:

cd ~
wget http://wordpress.org/latest.tar.gz

This will download a compressed archive file that contains all of the WordPress files that we need. We can extract the archived files to rebuild the WordPress directory with tar:

tar xzvf latest.tar.gz

You will now have a directory called wordpress in your home directory. We can finish the installation by transferring the unpacked files to Apache’s document root, where it can be served to visitors of our website. We can transfer our WordPress files there with rsync, which will preserve the files’ default permissions:

sudo rsync -avP ~/wordpress/ /var/www/html/

rysnc will safely copy all of the contents from the directory you unpacked to the document root at /var/www/html/. However, we still need to add a folder for WordPress to store uploaded files. We can do that with the mkdir command:

mkdir /var/www/html/wp-content/uploads

Now we need to assign the correct ownership and permissions to our WordPress files and folders. This will increase security while still allowing WordPress to function as intended. To do this, we’ll use chown to grant ownership to Apache’s user and group:

sudo chown -R apache:apache /var/www/html/*

With this change, the web server will be able to create and modify WordPress files, and will also allow us to upload content to the server.

Step Three — Configure WordPress

Most of the configuration required to use WordPress will be completed through a web interface later on. However, we need to do some work from the command line to ensure that WordPress can connect to the MySQL database that we created for it.

Begin by moving into the Apache root directory where you installed WordPress:

cd /var/www/html

The main configuration file that WordPress relies on is called wp-config.php. A sample configuration file that mostly matches the settings we need is included by default. All we have to do is copy it to the default configuration file location, so that WordPress can recognize and use the file:

cp wp-config-sample.php wp-config.php

Now that we have a configuration file to work with, let’s open it in a text editor:

nano wp-config.php

The only modifications we need to make to this file are to the parameters that hold our database information. We will need to find the section titled MySQL settings and change the DB_NAME, DB_USER, and DB_PASSWORD variables in order for WordPress to correctly connect and authenticate to the database that we created.

Fill in the values of these parameters with the information for the database that you created. It should look like this:

// ** MySQL settings - You can get this info from your web host ** //
/** The name of the database for WordPress */
define('DB_NAME', 'wordpress');

/** MySQL database username */
define('DB_USER', 'wordpressuser');

/** MySQL database password */
define('DB_PASSWORD', 'password');

These are the only values that you need to change, so save and close the file when you are finished.

Step Four — Complete Installation Through the Web Interface

Now that you have your files in place and your software is configured, you can complete the WordPress installation through the web interface. In your web browser, navigate to your server’s domain name or public IP address:

http://server_domain_name_or_IP

First, you will need to select the language that you would like to install WordPress with. After selecting a language and clicking on Continue, you will be presented with the WordPress initial configuration page, where you will create an initial administrator account:

WordPress Web Install

Fill out the information for the site and administrative account that you wish to make. When you are finished, click on the Install WordPress button at the bottom to continue.

WordPress will confirm the installation, and then ask you to log in with the account that you just created:

WordPress Success

To continue, hit the Log in button at the bottom, then fill out your administrator account information:

WordPress Login

After hitting Log in, you will be presented with your new WordPress dashboard:

WordPress Dashboard

Conclusion

You should now have a WordPress instance up and running on your CentOS 7 server. There are many avenues you can take from here. We’ve listed some common options below:

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

READ THIS: STEP FOUR TROUBLESHOOTING (I.E. “THERE HAS BEEN A CRITICAL ERROR ON YOUR WEBSITE.”) If you come across this message, then it most likely means you are missing a PHP hard dependency which wp-admin requires. Run this command on your CentOS system: sudo yum install php-json. Once that is done, run sudo systemctl restart mariadb httpd and refresh your web browser.

The above should solve your problem, but if not then try installing these as well if you don’t already have them: php-mysql: Hard dependency, else connections to your database cannot be established. php-fpm: Hard dependency, else you will get the error message “The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.” php-gd: Soft dependency, WordPress uses this library to resize your images into thumbnails. Your website will work without it, but I’d still recommend that you install it.

If you’ve got SELinux enable and are not a SELinux expert, apply this command:

setsebool -P httpd_unified 1

This command should solve some of the problems displayed in the previous comments.

thank you very much dear friends! It’s very helpfull!

Hi,

I followed this document and completed the steps but not able to see the gui console in my browser. I could see the below info in my browser. I would request you to hep me on this. Thanks in advance…

<?php
/**
 * Front to the WordPress application. This file doesn't do anything, but loads
 * wp-blog-header.php which does and tells WordPress to load the theme.
 *
 * @package WordPress
 */

/**
 * Tells WordPress to load the WordPress theme and output it.
 *
 * @var bool
 */
define('WP_USE_THEMES', true);

/** Loads the WordPress Environment and Template */
require( dirname( __FILE__ ) . '/wp-blog-header.php' );

cd ~ wget http://wordpress.org/latest.tar.gz

can’t get this step to work

Hi guys! Kinda late question, but after some failed attempts of other tutorials trying this scheme and stuck at step two, particularly after unpacking, while moving wordpress folder to /var/www/html/ I get this error: “sudo: rsync: command not found”. Maybe due to doing it via SSH? So how can I evade it?

Following this tutorial to install PHP produces the error, “Your server is running PHP version 5.4.16 but WordPress 5.2.1 requires at least 5.6.20.” after following this tutorial.

Error establishing a database connection problem show when i connect wp-admin

Hey, THX 4 that nice tutorial. Is there a way to get the automatic upgrade run?

I did that:

sudo chown -Rv apache:apache /var/www/html/

sudo find /var/www/html/ -type d -exec chmod 755 {} ;

sudo find /var/www/html/ -type f -exec chmod 644 {} ;

sudo chcon -t httpd_sys_rw_content_t /var/www/html/wp-content -R

wp-config.php file:

define(‘FS_METHOD’,’direct’);

But it changed nothing, Wordpress always asks for FTP/FTPS Login credentials. :(

Greetz, Chris

Hello! Your articles are very clear and correct. Thank you and good luck, it works the first time :)

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more