Tutorial

How To Use Etcdctl and Etcd, CoreOS's Distributed Key-Value Store

Published on September 15, 2014
How To Use Etcdctl and Etcd, CoreOS's Distributed Key-Value Store

Introduction

One of the technologies that makes CoreOS possible is etcd, a globally distributed key-value store. This service is used by the individual CoreOS machines to form a cluster and as a platform to store globally-accessible data.

In this guide, we will explore the etcd daemon as well as the etcdctl utility and the HTTP/JSON API that can be used to control it.

Prerequisites

To follow along with this guide, we assume that you have a cluster of CoreOS machines as our guide on getting a CoreOS cluster set up on DigitalOcean outlines. This will leave you with three servers in a single cluster:

  • coreos-1
  • coreos-2
  • coreos-3

Once you have these machines up and running, you can continue with this guide.

Etcd Cluster Discovery Model

One of the most fundamental tasks that etcd is responsible for is organizing individual machines into a cluster. This is done when CoreOS is booted by checking in at the discovery address supplied in the cloud-config file which is passed in upon creation.

The discovery service run by CoreOS is accessible at https://discovery.etcd.io. You can get a new token by visiting the /new page. There, you will get a token which your machines can use to discover their companion nodes. It will look like something like this:

https://discovery.etcd.io/dcadc5d4d42328488ecdcd7afae5f57c

You must supply a fresh token for every new cluster. This includes when you have to rebuild the cluster using nodes that may have the same IP address. The etcd instances will be confused by this and will not function correctly to build the cluster if you reuse the discovery address.

Visiting the discovery address in your web browser, you will get back a JSON object that describes the known machines. This won’t have any nodes when you first start out:

{"action":"get","node":{"key":"/_etcd/registry/dcadc5d4d42328488ecdcd7afae5f57c","dir":true,"modifiedIndex":102511104,"createdIndex":102511104}}

After bootstrapping your cluster, you will be able to see more information here:

{"action":"get","node":{"key":"/_etcd/registry/1edee33e6b03e75d9428eacf0ff94fda","dir":true,"nodes":[{"key":"/_etcd/registry/1edee33e6b03e75d9428eacf0ff94fda/2ddbdb7c872b4bc59dd1969ac166501e","value":"http://10.132.252.38:7001","expiration":"2014-09-19T13:41:26.912303668Z","ttl":598881,"modifiedIndex":102453704,"createdIndex":102453704},{"key":"/_etcd/registry/1edee33e6b03e75d9428eacf0ff94fda/921a7241c31a499a97d43f785108b17c","value":"http://10.132.248.118:7001","expiration":"2014-09-19T13:41:29.602508981Z","ttl":598884,"modifiedIndex":102453736,"createdIndex":102453736},{"key":"/_etcd/registry/1edee33e6b03e75d9428eacf0ff94fda/27987f5eaac243f88ca6823b47012c5b","value":"http://10.132.248.121:7001","expiration":"2014-09-19T13:41:41.817958205Z","ttl":598896,"modifiedIndex":102453860,"createdIndex":102453860}],"modifiedIndex":101632353,"createdIndex":101632353}}

If you need to find the discovery URL of a cluster, you can do so from any one of the machines that is a member. This information can be retrieved from within the /run hierarchy:

cat /run/systemd/system/etcd.service.d/20-cloudinit.conf
[Service]
Environment="ETCD_ADDR=10.132.248.118:4001"
Environment="ETCD_DISCOVERY=https://discovery.etcd.io/dcadc5d4d42328488ecdcd7afae5f57c"
Environment="ETCD_NAME=921a7241c31a499a97d43f785108b17c"
Environment="ETCD_PEER_ADDR=10.132.248.118:7001"

The URL is stored within the ETCD_DISCOVERY entry.

When the machines running etcd boot up, they will check the information at this URL. It will submit its own information and query about other members. The first node in the cluster will obviously not find information about other nodes, so it will designate itself as the cluster leader.

The subsequent machines will also contact the discovery URL with their information. They will receive information back about the machines that have already checked in. They will then choose one of these machines and connect directly, where they will get the full list of healthy cluster members. The replication and distribution of data is accomplished through the Raft consensus algorithm.

The data about each of the machines is stored within a hidden directory structure within etcd. You can see the information about the machines that etcd knows about by typing:

etcdctl ls /_etcd/machines --recursive
/_etcd/machines/2ddbdb7c872b4bc59dd1969ac166501e
/_etcd/machines/921a7241c31a499a97d43f785108b17c
/_etcd/machines/27987f5eaac243f88ca6823b47012c5b

The details that etcd pass to new cluster members are contained within these keys. You can see the individual values by requesting those with etcdctl:

etcdctl get /_etcd/machines/2ddbdb7c872b4bc59dd1969ac166501e
etcd=http%3A%2F%2F10.132.252.38%3A4001&raft=http%3A%2F%2F10.132.252.38%3A7001

We will go over the etcdctl commands in more depth later on.

Etcdctl Usage

There are two basic ways of interacting with etcd. Through the HTTP/JSON API and through a client, like the included etcdctl utility. We will go over etcdctl first.

Viewing Keys and Directories

To get started, let’s look a what etcdctl is currently storing. We can see the top-level keys by typing:

etcdctl ls /
/coreos.com

As you can see, we have one result. At this point, it is unclear whether this is a directory or a key. We can attempt to get the node to see either the key’s value or to see that it is a directory:

etcdctl get /coreos.com
/coreos.com: is a directory

In order to avoid this manual recursive process, we can tell etcdctl to list its entire hierarchy of visible information by typing:

etcdctl ls / --recursive
/coreos.com
/coreos.com/updateengine
/coreos.com/updateengine/rebootlock
/coreos.com/updateengine/rebootlock/semaphore

As you can see, there were quite a few directories under the initial /coreos.com node. We can see what it looks like to get actual data out of a node by asking for the information at the final endpoint:

etcdctl get /coreos.com/updateengine/rebootlock/semaphore
{"semaphore":1,"max":1,"holders":null}

This does not contain information that is very useful for us. We can get some additional metadata about this entry by passing in the -o extended option. This is a global option, so it must come before the get command:

etcdctl -o extended get /coreos.com/updateengine/rebootlock/semaphore
Key: /coreos.com/updateengine/rebootlock/semaphore
Created-Index: 6
Modified-Index: 6
TTL: 0
Etcd-Index: 170387
Raft-Index: 444099
Raft-Term: 8

{"semaphore":1,"max":1,"holders":null}

Setting Keys and Creating Nodes

To create a new directory, you can use the mkdir command like so:

etcdctl mkdir /example

To make a key, you can use the mk command:

etcdctl mk /example/key data
data

This will only work if the key does not already exist. If we ask for the value of the key we created, we can retrieve the data we set:

etcdctl get /example/key
data

To update an existing key, use the update command:

etcdctl update /example/key turtles
turtles

The companion updatedir command for directories is probably only useful if you have set a TTL, or time-to-live on a directory. This will update the TTL time with the one passed. You can set TTLs for directories or keys by passing the --ttl # argument, where “#” is the number of seconds to keep:

etcdctl mkdir /here/you/go --ttl 120

You can then update the TTL with updatedir:

etcdctl updatedir /here/you/go --ttl 500

To change the value of an existing key, or to create a key if it does not exist, use the set command. Think of this as a combination of the mk and update command:

etcdctl set /example/key new
new

This can include non-existent paths. The path components will be created dynamically:

etcdctl set /a/b/c here
here

To get this same create-if-does-not-exist functionality for directories, you can use the setdir command:

etcdctl setdir /x/y/z

Note: the setdir command does not currently function as stated. In the current build, its usage mirrors the updatedir command and will fail if the directory already exists. There is an open issue on the GitHub repository to address this.

Removing Entries

To remove existing keys, you can use the rm or rmdir command.

The rm command can be used to remove a key:

etcdctl rm /a/b/c

It can also be used recursively to remove a directory and every subdirectory:

etcdctl rm /a --recursive

To remove only an empty directory or a key, use the rmdir command:

etcdctl rmdir /x/y/z

This can be used to make sure you are only removing the endpoints of the hierarchies.

Watching for Changes

You can watch either a specific key or an entire directory for changes. Watching these with etcdctl will cause the operation to hang until some event happens to whatever is being watched.

To watch a key, use it without any flags:

etcdctl watch /example/hello

To stop watching, you can press CTRL-C. If a change is detected during the watch, the new value will be returned.

To watch an entire directory structure, use the --recursive flag:

etcdctl watch --recursive /example

You can see how this would be useful by placing it in a simple looping construct to constantly monitor the state of the values:

while true; do etcdctl watch --recursive /example; done

If you would like to execute a command whenever a change is detected, use the exec-watch command:

etcdctl exec-watch --recursive  /example -- echo "hello"

This will echo “hello” to the screen whenever a value in that directory changes.

Hidden Values

One thing that is not immediately apparent is that there are hidden directory structures within etcd. These are directories or keys that begin with an underscore.

These are not listed by the conventional etcdctl tools and you must know what you are looking for in order to find them.

For instance, there is a hidden directory called /_coreos.com that holds some internal information about fleet. You can see the hierarchy by explicitly asking for it:

etcdctl ls --recursive /_coreos.com 
/_coreos.com/fleet
/_coreos.com/fleet/states
/_coreos.com/fleet/states/apache@6666.service
/_coreos.com/fleet/states/apache@6666.service/2ddbdb7c872b4bc59dd1969ac166501e
/_coreos.com/fleet/states/apache@7777.service
/_coreos.com/fleet/states/apache@7777.service/921a7241c31a499a97d43f785108b17c
. . .

Another such directory structure is located within /_etcd:

etcdctl ls --recursive /_etcd
/_etcd/machines
/_etcd/machines/27987f5eaac243f88ca6823b47012c5b
/_etcd/machines/2ddbdb7c872b4bc59dd1969ac166501e
/_etcd/machines/921a7241c31a499a97d43f785108b17c
/_etcd/config

These function exactly like any other entry, with the only difference being that they do not show up in general listings. You can create them by simply starting your key or directory name with an underscore.

Etcd HTTP/JSON API Usage

The other way to interacting with etcd is with the simple HTTP/JSON API.

To access the API, you can use a simple HTTP program like curl. You must supply the -L flag to follow any redirects that are passed back. From within your cluster, you can use the local 127.0.0.1 interface and port 4001 for most queries.

Note: To connect to etcd from within a Docker container, the address http://172.17.42.1:4001 can be used. This can be useful for applications to update their configurations based on registered information.

The normal keyspace can be reached by going to http://127.0.0.1:4001/v2/keys/ on any of the host machines. For instance, to get a listing of the top-level keys/directories, type:

curl -L http://127.0.0.1:4001/v2/keys/
{"action":"get","node":{"key":"/","dir":true,"nodes":[{"key":"/coreos.com","dir":true,"modifiedIndex":6,"createdIndex":6},{"key":"/services","dir":true,"modifiedIndex":333,"createdIndex":333}]}}

The trailing slash in the request is mandatory. It will not resolve correctly without it.

You can set or retrieve values using normal HTTP verbs.

To modify the behavior of these operations, you can pass in flags at the end of your request using the ?flag=value syntax. Multiple flags can be separated by a & character.

For instance, to recursively list all of the keys, we could type:

curl -L http://127.0.0.1:4001/v2/keys/?recursive=true
{"action":"get","node":{"key":"/","dir":true,"nodes":[{"key":"/coreos.com","dir":true,"nodes":[{"key":"/coreos.com/updateengine","dir":true,"nodes":[{"key":"/coreos.com/updateengine/rebootlock","dir":true,"nodes":[{"key":"/coreos.com/updateengine/rebootlock/semaphore","value":"{\"semaphore\":1,\"max\":1,\"holders\":null}","modifiedIndex":6,"createdIndex":6}],"modifiedIndex":6,"createdIndex":6}],"modifiedIndex":6,"createdIndex":6}],"modifiedIndex":6,"createdIndex":6}. . .

Another useful piece of information that is accessible outside of the normal keyspace is version info, accessible here:

curl -L http://127.0.0.1:4001/version
etcd 0.4.6

You can view stats about each of the cluster leader’s relationship with each follower by visiting this endpoint:

curl -L http://127.0.0.1:4001/v2/stats/leader
{"leader":"921a7241c31a499a97d43f785108b17c","followers":{"27987f5eaac243f88ca6823b47012c5b":{"latency":{"current":1.607038,"average":1.3762888642395448,"standardDeviation":1.4404313533578545,"minimum":0.471432,"maximum":322.728852},"counts":{"fail":0,"success":98718}},"2ddbdb7c872b4bc59dd1969ac166501e":{"latency":{"current":1.584985,"average":1.1554367141497013,"standardDeviation":0.6872303198242179,"minimum":0.427485,"maximum":31.959235},"counts":{"fail":0,"success":98723}}}}

A similar operation can be used to detect stats about the machine you are currently on:

curl -L http://127.0.0.1:4001/v2/stats/self
{"name":"921a7241c31a499a97d43f785108b17c","state":"leader","startTime":"2014-09-11T16:42:03.035382298Z","leaderInfo":{"leader":"921a7241c31a499a97d43f785108b17c","uptime":"1h19m11.469872568s","startTime":"2014-09-12T19:47:25.242151859Z"},"recvAppendRequestCnt":1944480,"sendAppendRequestCnt":201817,"sendPkgRate":40.403374523779064,"sendBandwidthRate":3315.096879676072}

To see stats about operations that have been preformed, type:

curl -L http://127.0.0.1:4001/v2/stats/store
{"getsSuccess":78823,"getsFail":14,"setsSuccess":121370,"setsFail":4,"deleteSuccess":28,"deleteFail":32,"updateSuccess":20468,"updateFail":4,"createSuccess":39,"createFail":102340,"compareAndSwapSuccess":51169,"compareAndSwapFail":0,"compareAndDeleteSuccess":0,"compareAndDeleteFail":0,"expireCount":3,"watchers":6}

These are just a few of the operations that can be used to control etcd through the API.

Etcd Configuration

The etcd service can be configured in a few different ways.

The first way is to pass in parameters with your cloud-config file that you use to bootstrap your nodes. In the bootstrapping guide, you saw a bit about how to do this:

#cloud-config

coreos:
  etcd:
    discovery: https://discovery.etcd.io/<token>
    addr: $private_ipv4:4001
    peer-addr: $private_ipv4:7001
. . .

To see the options that you have available, use the -h flag with etcd:

etcd -h

To include these options in your cloud-config, simply take off the leading dash and separate keys from values with a colon instead of an equal sign. So -peer-addr=<host:port> becomes peer-addr: <host:port>.

Upon reading the cloud-config file, CoreOS will translate these into environmental variables in a stub unit file, which is used to start the service.

Another way to adjust the settings for etcd is through the API. This is generally done using the 7001 port instead of the standard 4001 that is used for key queries.

For instance, you can get some of the current configuration values by typing:

curl -L http://127.0.0.1:7001/v2/admin/config
{"activeSize":9,"removeDelay":1800,"syncInterval":5}

You can change these values by passing in the new JSON as the data payload with a PUT operation:

curl -L http://127.0.0.1:7001/v2/admin/config -XPUT -d '{"activeSize":9,"removeDelay":1800,"syncInterval":5}'
{"activeSize":9,"removeDelay":1800,"syncInterval":5}

To get a list of machines, you can go to the /v2/admin/machines endpoint:

curl -L http://127.0.0.1:7001/v2/admin/machines
[{"name":"27987f5eaac243f88ca6823b47012c5b","state":"follower","clientURL":"http://10.132.248.121:4001","peerURL":"http://10.132.248.121:7001"},{"name":"2ddbdb7c872b4bc59dd1969ac166501e","state":"follower","clientURL":"http://10.132.252.38:4001","peerURL":"http://10.132.252.38:7001"},{"name":"921a7241c31a499a97d43f785108b17c","state":"leader","clientURL":"http://10.132.248.118:4001","peerURL":"http://10.132.248.118:7001"}]

This can be used to remove machines forcefully from the cluster with the DELETE method.

Conclusion

As you can see, etcd can be used to store or retrieve information from any machine in your cluster. This allows you to synchronize data and provides a location for services to look for configuration data and connection details.

This is especially useful when building distributed systems because you can provide a simple endpoint that will be valid from any location within the cluster. By taking advantage of this resource, your services can dynamically configure themselves.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


Tutorial Series: Getting Started with CoreOS

CoreOS is a powerful Linux distribution built to make large, scalable deployments on varied infrastructure simple to manage. Based on a build of Chrome OS, CoreOS maintains a lightweight host system and uses Docker containers for all applications. In this series, we will introduce you to the basics of CoreOS, teach you how to set up a CoreOS cluster, and get you started with using docker containers with CoreOS.

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
6 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Based on the clues (using ports 4001/7001, discussing hidden keys), I’m guessing this (otherwise awesome) article was written around etcd 0.4.7. Some things have since change (currently at 2.2.x):

  1. Ports are now 2379/2380 instead of 4001/7001.
  2. Hidden keys are scheduled for removal in v3, which is close to ready.

Probably a few more, but I don’t know enough to spot them yet (just started learning etcd this morning).

I am curious if there’s a way to contribute patches to update the DO Community tutorials…

Awesome!

In my machine the folder “_etcd” doesn’t exist. Any idea about why?

core@core-1 ~ $ etcdctl ls /_etcd --recursive Error: 100: Key not found (/_etcd) [15832]

This comment has been deleted

    Thanks! it helps :-)

    This comment has been deleted

      Try DigitalOcean for free

      Click below to sign up and get $200 of credit to try our products over 60 days!

      Sign up

      Join the Tech Talk
      Success! Thank you! Please check your email for further details.

      Please complete your information!

      Get our biweekly newsletter

      Sign up for Infrastructure as a Newsletter.

      Hollie's Hub for Good

      Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

      Become a contributor

      Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

      Welcome to the developer cloud

      DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

      Learn more
      DigitalOcean Cloud Control Panel