How To Use Netcat to Establish and Test TCP and UDP Connections

How To Use Netcat to Establish and Test TCP and UDP Connections


Linux is known for having a great number of mature, useful command line utilities available out of the box in most distributions. Often, system administrators can do much of their work using the built-in tools without having to install additional software.

In this guide, we will discuss how to use the netcat utility. This versatile command can assist you in monitoring, testing, and sending data across network connections.

Netcat should be available on almost any modern Linux distribution. Ubuntu ships with the BSD variant of netcat, and this is what we will be using in this guide. Other versions may operate differently or provide other options.

General Syntax

By default, netcat operates by initiating a TCP connection to a remote host.

The most basic syntax is:

  1. netcat [options] host port

This will attempt to initiate a TCP connection to the defined host on the port number specified. This functions similarly to the old Linux telnet command. Keep in mind that your connection is entirely unencrypted.

If you would like to send a UDP packet instead of initiating a TCP connection, you can use the -u option:

  1. netcat -u host port

You can specify a range of ports by placing a dash between the first and last:

  1. netcat host startport-endport

This is generally used with some additional flags.

On most systems, we can use either netcat or nc interchangeably. They are aliases for the same command.

How To Use Netcat for Port Scanning

One of the most common uses for netcat is as a port scanner.

Although netcat is probably not the most sophisticated tool for the job (nmap is a better choice in most cases), it can perform simple port scans to easily identify open ports.

We do this by specifying a range of ports to scan, as we did above, along with the -z option to perform a scan instead of attempting to initiate a connection.

For instance, we can scan all ports up to 1000 by issuing this command:

  1. netcat -z -v domain.com 1-1000

Along with the -z option, we have also specified the -v option to tell netcat to provide more verbose information.

The output will look like this:

nc: connect to domain.com port 1 (tcp) failed: Connection refused nc: connect to domain.com port 2 (tcp) failed: Connection refused nc: connect to domain.com port 3 (tcp) failed: Connection refused nc: connect to domain.com port 4 (tcp) failed: Connection refused nc: connect to domain.com port 5 (tcp) failed: Connection refused nc: connect to domain.com port 6 (tcp) failed: Connection refused nc: connect to domain.com port 7 (tcp) failed: Connection refused . . . Connection to domain.com 22 port [tcp/ssh] succeeded! . . .

As you can see, this provides a lot of information and will tell you for each port whether a scan was successful or not.

If you are actually using a domain name, this is the form you will have to use.

However, your scan will go much faster if you know the IP address that you need. You can then use the -n flag to specify that you do not need to resolve the IP address using DNS:

  1. netcat -z -n -v 1-1000

The messages returned are actually sent to standard error (see our I/O redirection article for more info). We can send the standard error messages to standard out, which will allow us to filter the results easier.

We will redirect standard error to standard output using the 2>&1 bash syntax. We will then filter the results with grep:

  1. netcat -z -n -v 1-1000 2>&1 | grep succeeded
Connection to 22 port [tcp/*] succeeded!

Here, we can see that the only port open in the range of 1–1000 on the remote computer is port 22, the traditional SSH port.

How To Communicate through Netcat

Netcat is not restricted to sending TCP and UDP packets. It also can listen on a port for connections and packets. This gives us the opportunity to connect two instances of netcat in a client-server relationship.

Which computer is the server and which is the client is only a relevant distinction during the initial configuration. After the connection is established, communication is exactly the same in both directions.

On one machine, you can tell netcat to listen to a specific port for connections. We can do this by providing the -l parameter and choosing a port:

  1. netcat -l 4444

This will tell netcat to listen for TCP connections on port 4444. As a regular (non-root) user, you will not be able to open any ports under 1000, as a security measure.

On a second server, we can connect to the first machine on the port number we chose. We do this the same way we’ve been establishing connections previously:

  1. netcat domain.com 4444

It will look as if nothing has happened. However, you can now send messages on either side of the connection and they will be seen on either end.

Type a message and press ENTER. It will appear on both the local and remote screen. This works in the opposite direction as well.

When you are finished passing messages, you can press CTRL-D to close the TCP connection.

How To Send Files through Netcat

Building off of the previous example, we can accomplish more useful tasks.

Because we are establishing a regular TCP connection, we can transmit just about any kind of information over that connection. It is not limited to chat messages that are typed in by a user. We can use this knowledge to turn netcat into a file transfer program.

Once again, we need to choose one end of the connection to listen for connections. However, instead of printing information onto the screen, as we did in the last example, we will place all of the information straight into a file:

  1. netcat -l 4444 > received_file

The > in this command redirects all the output of netcat into the specified filename.

On the second computer, create a simple text file by typing:

  1. echo "Hello, this is a file" > original_file

We can now use this file as an input for the netcat connection we will establish to the listening computer. The file will be transmitted just as if we had typed it interactively:

  1. netcat domain.com 4444 < original_file

We can see on the computer that was awaiting a connection, that we now have a new file called received_file with the contents of the file we typed on the other computer:

  1. cat received_file
Hello, this is a file

As you can see, by piping things, we can easily take advantage of this connection to transfer all kinds of things.

For instance, we can transfer the contents of an entire directory by creating an unnamed tarball on-the-fly, transferring it to the remote system, and unpacking it into the remote directory.

On the receiving end, we can anticipate a file coming over that will need to be unzipped and extracted by typing:

  1. netcat -l 4444 | tar xzvf -

The ending dash (-) means that tar will operate on standard input, which is being piped from netcat across the network when a connection is made.

On the side with the directory contents we want to transfer, we can pack them into a tarball and then send them to the remote computer through netcat:

  1. tar -czf - * | netcat domain.com 4444

This time, the dash in the tar command means to tar and zip the contents of the current directory (as specified by the * wildcard), and write the result to standard output.

This is then written directly to the TCP connection, which is then received at the other end and decompressed into the current directory of the remote computer.

This is just one example of transferring more complex data from one computer to another. Another common idea is to use the dd command to image a disk on one side and transfer it to a remote computer. We won’t be covering this here though.

How To Use Netcat as a Simple Web Server

We’ve been configuring netcat to listen for connections in order to communicate and transfer files. We can use this same concept to operate netcat as a very simple web server. This can be useful for testing pages that you are creating.

First, let’s make a simple HTML file on one server:

  1. nano index.html

Here is some simple HTML that you can use in your file:

                <title>Test Page</title>
                <h1>Level 1 header</h1>
                <p>Normal text here</p>

Save and close the file.

Without root privileges, you cannot serve this file on the default web port, port 80. We can choose port 8888 as a regular user.

If you just want to serve this page one time to check how it renders, you can run the following command:

  1. printf 'HTTP/1.1 200 OK\n\n%s' "$(cat index.html)" | netcat -l 8888

Now, in your browser, you can access the content by visiting:


netcat page served

This will serve the page, and then the netcat connection will close. If you attempt to refresh the page, it will be gone:

netcat page gone

We can have netcat serve the page indefinitely by wrapping the last command in an infinite loop, like this:

  1. while true; do printf 'HTTP/1.1 200 OK\n\n%s' "$(cat index.html)" | netcat -l 8888; done

This will allow it to continue to receive connections after the first connection closes.

We can stop the loop by typing CTRL-C on the server.

This allows you to see how a page renders in a browser, but it doesn’t provide much more functionality. You should never use this for serving actual websites. There is no security and simple things like links do not even work correctly.


You should now have a pretty good idea as to what netcat can be used for. It is a versatile tool that can be useful to diagnose problems and verify that base-level functionality is working correctly with TCP/UDP connections.

Using netcat, you can communicate between different computers very easily for quick interactions. Netcat attempts to make network interactions transparent between computers by taking the complexity out of forming connections.

Easily secure your cloud resources within private, isolated networks with DigitalOcean’s virtual private cloud (VPC). Create a VPC network in seconds.

Learn more here

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Amazing. I’d heard of netcat and wanted to get started with it but did not know where to begin. This is a perfect intro, thanks!

This comment has been deleted


    incredible article!

    Good article!!!

    Nice article. One point worth mentioning.

    When using netcat as a simple web server, you have this command written: netcat -l 8888 < index.html

    You actually need to specify the port in the command, or else it won’t work. Try this instead. netcat -lp 8888 < index.html I found this solution to work.

    Keep up the good work!

    nice article you covered lot of variants, can you please also show an example to listen( nc -lu <port_num>) on specific udp port. That could be helpful for the first readers.

    great intro to netcat, thanks! I use nmap for doing port scanning, but its nice to be able to do it with netcat as well, since nmap is often not included in the base linux packages.

    Kamal Nasser
    DigitalOcean Employee
    DigitalOcean Employee badge
    August 7, 2014

    @helder.nc: Thanks for catching that! I’ve fixed it.

    Good article, but you have formatting issues from somewhere in “How To Send Files through Netcat”.

    Try DigitalOcean for free

    Click below to sign up and get $200 of credit to try our products over 60 days!

    Sign up

    Join the Tech Talk
    Success! Thank you! Please check your email for further details.

    Please complete your information!

    Featured on Community

    Get our biweekly newsletter

    Sign up for Infrastructure as a Newsletter.

    Hollie's Hub for Good

    Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

    Become a contributor

    Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

    Welcome to the developer cloud

    DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

    Learn more
    DigitalOcean Cloud Control Panel