Initial Server Setup with Arch Linux

Published on September 10, 2012
Initial Server Setup with Arch Linux

The Basics

When you first begin to access your fresh new virtual server, there are a few early steps you should take to make it more secure. Some of the first tasks can include setting up a new user, providing them with the proper privileges, and configuring SSH.

Step One—Root Login

Once you know your IP address and root password, login as the main user, root. You can log in through Terminal on a Mac computer and PutTTy on the PC

It is not encouraged to use root on a regular basis, and this tutorial will help you set up an alternative user to login into your virtual private server with permanently.

ssh root@

The terminal will show:

The authenticity of host ' (' can't be established.
ECDSA key fingerprint is 79:95:46:1a:ab:37:11:8e:86:54:36:38:bb:3c:fa:c0.
Are you sure you want to continue connecting (yes/no)?

Go ahead and type yes, and then enter your root password.

Step Two—Change Your Password

Currently your root password is the default one that was sent to you when you registered your droplet. The first thing to do is change it to one of your choice.


Step Three— Create a New User

After you have logged in and changed your password, you will not need to login again as root. In this step we will make a new user and give them all of the root capabilities on the VPS.

You can choose any name for your user. Throughout this tutorial, I will use the name example user

useradd -m exampleuser 

The "-m" makes a home directory for your user.

To change your new user's password, use

passwd exampleuser

Step Four— Root Privileges

As of yet, only root has all of the administrative capabilities on the virtual server. We are going to give the new user the root privileges.

When you perform any root tasks with the new user, you will need to use the phrase “sudo” before the command. This is a helpful command for 2 reasons: 1) it prevents the user making any system-destroying mistakes 2) it stores all the commands run with sudo to the file ‘/var/log/secure' which can be reviewed later if needed.

Let’s go ahead and edit the sudo configuration. Vi, the text editor used for this file, does not recognize arrow keys. Move down using “j”, up with “k”, left with “h”, and right with “l”. Additionally, you can begin editing the text by pressing “a”, and delete text by pressing Escape and then “x”


Find the section called user privilege specification. It will look like this:

# User privilege specification
root ALL=(ALL) ALL

Under there, add the following line, granting all the permissions to your new user:

exampleuser ALL=(ALL) ALL

Press escape and then Shift ZZ to save and exit the file.

Step Five— Configure SSH

Now it’s time to make the VPS more secure.

Open the configuration file

nano /etc/ssh/sshd_config

Find the following sections and change the information where applicable. Be sure to uncomment the lines as well, otherwise the changes will not take effect. (You can find words and phrases in the file by pressing Control-W)

Port 25000
PermitRootLogin no

Port: Although port 22 is the default, you can change this to any number between 1025 and 65536. In this example, I am using port 25000. Make sure you make a note of the new port number. You will need it to log in in the future. This change will make it more difficult for unauthorized people to log in.

PermitRootLogin: change this from yes to no to stop future root login. You will now only be logging on as the new user.

Step Six— Reload and Done!

Reload SSH, and it will implement the new ports and settings.

systemctl restart sshd

To test the new settings (Do Not Log Out of Root!), open a new terminal window and login as your new user.

Don’t forget to include the new port number.

ssh -p 25000 exampleuser@

Your prompt should now say:

[exampleuser@yourhostname ~]$

Once you know you can login into your virtual private server with your new user, you can exit out of root.

See More

After your initial setup you can proceed to install a LAMP server to get a web server up and running.

By Etel Sverdlov

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Is it really hard to maintain Arch Linux on DigitalOcean? If no, then why didn’t they continue to have images for it? If yes, then what are the pain points?

I’ve done this one two different Arch Linux 32-bit Droplets and after a time I cannot ping or access via SSH the droplet anymore. I’ve destroyed it and going back to CentOS.

I got following error. what should I do now? [root@server ~]# pacman -Syu :: Synchronizing package databases… core is up to date extra is up to date community is up to date :: Starting full system upgrade… warning: linux: ignoring package upgrade (3.8.4-1 => 3.12.6-1) there is nothing to do

Instead of ‘systemctl restart sshd’, i should use ‘kill -HUP $ssh_deamon_PID’; this method don’t break your connection

Yep, thank you to remember me that jdarnold. I get a headache fixing that issue on my laptop some months back but just get through it in a few minutes on the server.

Take care.

It’s actually pretty easy to upgrade the Archd droplet, although I am with Tim L - wish they would update the droplet image to get past this rather major change in Arch.

But you really only need to do the last three commands on the wiki page:

pacman -Syu --ignore filesystem,bash

pacman -S bash

pacman -Su

This gets you all updated and ready to go.

That being said, I would consider Arch to be an intermediate to advanced Linux user distro. You really get a barebones “box” here, which is good if you know what you are doing but can be quite intimidating.

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
September 5, 2013

@io: What kind of information is this article missing? Please check the rest of the Arch Linux articles and see if you can find what you need there:


There is quite a bit of missing info in the article. A walkthrough would be helpful…

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
August 26, 2013

@mkstlouis: You need to upgrade your system according to the link Tim posted.

I was wondering what was wrong. As a newbie though that link you posted Tim while appreciated, I don’t really get. Just hope they update the images or I can figure it out soon as I just deleted my droplet to start over with Arch.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel