Tutorial

How To Read and Set Environmental and Shell Variables on Linux

Updated on June 28, 2021
English
How To Read and Set Environmental and Shell Variables on Linux

Introduction

When interacting with your server through a shell session, there are many pieces of information that your shell compiles to determine its behavior and access to resources. Some of these settings are contained within configuration settings and others are determined by user input.

One way that the shell keeps track of all of these settings and details is through an area it maintains called the environment. The environment is an area that the shell builds every time that it starts a session that contains variables that define system properties.

In this guide, we will discuss how to interact with the environment and read or set environmental and shell variables interactively and through configuration files.

If you’d like to follow along using your local system or a remote server, open a terminal and run the commands from this tutorial there.

How the Environment and Environmental Variables Work

Every time a shell session spawns, a process takes place to gather and compile information that should be available to the shell process and its child processes. It obtains the data for these settings from a variety of different files and settings on the system.

The environment provides a medium through which the shell process can get or set settings and, in turn, pass these on to its child processes.

The environment is implemented as strings that represent key-value pairs. If multiple values are passed, they are typically separated by colon (:) characters. Each pair will generally look something like this:

KEY=value1:value2:...

If the value contains significant white-space, quotations are used:

KEY="value with spaces"

The keys in these scenarios are variables. They can be one of two types, environmental variables or shell variables.

Environmental variables are variables that are defined for the current shell and are inherited by any child shells or processes. Environmental variables are used to pass information into processes that are spawned from the shell.

Shell variables are variables that are contained exclusively within the shell in which they were set or defined. They are often used to keep track of ephemeral data, like the current working directory.

By convention, these types of variables are usually defined using all capital letters. This helps users distinguish environmental variables within other contexts.

Printing Shell and Environmental Variables

Each shell session keeps track of its own shell and environmental variables. We can access these in a few different ways.

We can see a list of all of our environmental variables by using the env or printenv commands. In their default state, they should function exactly the same:

  1. printenv

Your shell environment may have more or fewer variables set, with different values than the following output:

Output
SHELL=/bin/bash TERM=xterm USER=demouser LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca:... MAIL=/var/mail/demouser PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games PWD=/home/demouser LANG=en_US.UTF-8 SHLVL=1 HOME=/home/demouser LOGNAME=demouser LESSOPEN=| /usr/bin/lesspipe %s LESSCLOSE=/usr/bin/lesspipe %s %s _=/usr/bin/printenv

This is fairly typical of the output of both printenv and env. The difference between the two commands is only apparent in their more specific functionality. For instance, with printenv, you can request the values of individual variables:

  1. printenv PATH
Output
/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games

On the other hand, env lets you modify the environment that programs run in by passing a set of variable definitions into a command like this:

  1. env VAR1="value" command_to_run command_options

Since, as we learned above, child processes typically inherit the environmental variables of the parent process, this gives you the opportunity to override values or add additional variables for the child.

As you can see from the output of our printenv command, there are quite a few environmental variables set up through our system files and processes without our input.

These show the environmental variables, but how do we see shell variables?

The set command can be used for this. If we type set without any additional parameters, we will get a list of all shell variables, environmental variables, local variables, and shell functions:

  1. set
Output
BASH=/bin/bash BASHOPTS=checkwinsize:cmdhist:expand_aliases:extglob:extquote:force_fignore:histappend:interactive_comments:login_shell:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() . . .

This is usually a huge list. You probably want to pipe it into a pager program to more easily deal with the amount of output:

  1. set | less

The amount of additional information that we receive back is a bit overwhelming. We probably do not need to know all of the bash functions that are defined, for instance.

We can clean up the output by specifying that set should operate in POSIX mode, which won’t print the shell functions. We can execute this in a sub-shell so that it does not change our current environment:

  1. (set -o posix; set)

This will list all of the environmental and shell variables that are defined.

We can attempt to compare this output with the output of the env or printenv commands to try to get a list of only shell variables, but this will be imperfect due to the different ways that these commands output information:

  1. comm -23 <(set -o posix; set | sort) <(env | sort)

This will likely still include a few environmental variables, due to the fact that the set command outputs quoted values, while the printenv and env commands do not quote the values of strings.

This should still give you a good idea of the environmental and shell variables that are set in your session.

These variables are used for all sorts of things. They provide an alternative way of setting persistent values for the session between processes, without writing changes to a file.

Common Environmental and Shell Variables

Some environmental and shell variables are very useful and are referenced fairly often. Here are some common environmental variables that you will come across:

  • SHELL: This describes the shell that will be interpreting any commands you type in. In most cases, this will be bash by default, but other values can be set if you prefer other options.
  • TERM: This specifies the type of terminal to emulate when running the shell. Different hardware terminals can be emulated for different operating requirements. You usually won’t need to worry about this though.
  • USER: The current logged in user.
  • PWD: The current working directory.
  • OLDPWD: The previous working directory. This is kept by the shell in order to switch back to your previous directory by running cd -.
  • LS_COLORS: This defines color codes that are used to optionally add colored output to the ls command. This is used to distinguish different file types and provide more info to the user at a glance.
  • MAIL: The path to the current user’s mailbox.
  • PATH: A list of directories that the system will check when looking for commands. When a user types in a command, the system will check directories in this order for the executable.
  • LANG: The current language and localization settings, including character encoding.
  • HOME: The current user’s home directory.
  • _: The most recent previously executed command.

In addition to these environmental variables, some shell variables that you’ll often see are:

  • BASHOPTS: The list of options that were used when bash was executed. This can be useful for finding out if the shell environment will operate in the way you want it to.
  • BASH_VERSION: The version of bash being executed, in human-readable form.
  • BASH_VERSINFO: The version of bash, in machine-readable output.
  • COLUMNS: The number of columns wide that are being used to draw output on the screen.
  • DIRSTACK: The stack of directories that are available with the pushd and popd commands.
  • HISTFILESIZE: Number of lines of command history stored to a file.
  • HISTSIZE: Number of lines of command history allowed in memory.
  • HOSTNAME: The hostname of the computer at this time.
  • IFS: The internal field separator to separate input on the command line. By default, this is a space.
  • PS1: The primary command prompt definition. This is used to define what your prompt looks like when you start a shell session. The PS2 is used to declare secondary prompts for when a command spans multiple lines.
  • SHELLOPTS: Shell options that can be set with the set option.
  • UID: The UID of the current user.

Setting Shell and Environmental Variables

To better understand the difference between shell and environmental variables, and to introduce the syntax for setting these variables, we will do a small demonstration.

Creating Shell Variables

We will begin by defining a shell variable within our current session. This is easy to accomplish; we only need to specify a name and a value. We’ll adhere to the convention of keeping all caps for the variable name, and set it to a simple string.

  1. TEST_VAR='Hello World!'

Here, we’ve used quotations since the value of our variable contains a space. Furthermore, we’ve used single quotes because the exclamation point is a special character in the bash shell that normally expands to the bash history if it is not escaped or put into single quotes.

We now have a shell variable. This variable is available in our current session, but will not be passed down to child processes.

We can see this by grepping for our new variable within the set output:

  1. set | grep TEST_VAR
Output
TEST_VAR='Hello World!'

We can verify that this is not an environmental variable by trying the same thing with printenv:

  1. printenv | grep TEST_VAR

No output should be returned.

Let’s take this as an opportunity to demonstrate a way of accessing the value of any shell or environmental variable.

  1. echo $TEST_VAR
Output
Hello World!

As you can see, reference the value of a variable by preceding it with a $ sign. The shell takes this to mean that it should substitute the value of the variable when it comes across this.

So now we have a shell variable. It shouldn’t be passed on to any child processes. We can spawn a new bash shell from within our current one to demonstrate:

  1. bash
  2. echo $TEST_VAR

If we type bash to spawn a child shell, and then try to access the contents of the variable, nothing will be returned. This is what we expected.

Get back to our original shell by typing exit:

  1. exit

Creating Environmental Variables

Now, let’s turn our shell variable into an environmental variable. We can do this by exporting the variable. The command to do so is appropriately named:

  1. export TEST_VAR

This will change our variable into an environmental variable. We can check this by checking our environmental listing again:

  1. printenv | grep TEST_VAR
Output
TEST_VAR=Hello World!

This time, our variable shows up. Let’s try our experiment with our child shell again:

  1. bash
  2. echo $TEST_VAR
Output
Hello World!

Great! Our child shell has received the variable set by its parent. Before we exit this child shell, let’s try to export another variable. We can set environmental variables in a single step like this:

  1. export NEW_VAR="Testing export"

Test that it’s exported as an environmental variable:

  1. printenv | grep NEW_VAR
Output
NEW_VAR=Testing export

Now, let’s exit back into our original shell:

  1. exit

Let’s see if our new variable is available:

  1. echo $NEW_VAR

Nothing is returned.

This is because environmental variables are only passed to child processes. There isn’t a built-in way of setting environmental variables of the parent shell. This is good in most cases and prevents programs from affecting the operating environment from which they were called.

The NEW_VAR variable was set as an environmental variable in our child shell. This variable would be available to itself and any of its child shells and processes. When we exited back into our main shell, that environment was destroyed.

Demoting and Unsetting Variables

We still have our TEST_VAR variable defined as an environmental variable. We can change it back into a shell variable by typing:

  1. export -n TEST_VAR

It is no longer an environmental variable:

  1. printenv | grep TEST_VAR

However, it is still a shell variable:

  1. set | grep TEST_VAR
Output
TEST_VAR='Hello World!'

If we want to completely unset a variable, either shell or environmental, we can do so with the unset command:

  1. unset TEST_VAR

We can verify that it is no longer set:

  1. echo $TEST_VAR

Nothing is returned because the variable has been unset.

Setting Environmental Variables at Login

We’ve already mentioned that many programs use environmental variables to decide the specifics of how to operate. We do not want to have to set important variables up every time we start a new shell session, and we have already seen how many variables are already set upon login, so how do we make and define variables automatically?

This is actually a more complex problem than it initially seems, due to the numerous configuration files that the bash shell reads depending on how it is started.

The Difference between Login, Non-Login, Interactive, and Non-Interactive Shell Sessions

The bash shell reads different configuration files depending on how the session is started.

One distinction between different sessions is whether the shell is being spawned as a login or non-login session.

A login shell is a shell session that begins by authenticating the user. If you are signing into a terminal session or through SSH and authenticate, your shell session will be set as a login shell.

If you start a new shell session from within your authenticated session, like we did by calling the bash command from the terminal, a non-login shell session is started. You were were not asked for your authentication details when you started your child shell.

Another distinction that can be made is whether a shell session is interactive, or non-interactive.

An interactive shell session is a shell session that is attached to a terminal. A non-interactive shell session is one is not attached to a terminal session.

So each shell session is classified as either login or non-login and interactive or non-interactive.

A normal session that begins with SSH is usually an interactive login shell. A script run from the command line is usually run in a non-interactive, non-login shell. A terminal session can be any combination of these two properties.

Whether a shell session is classified as a login or non-login shell has implications on which files are read to initialize the shell session.

A session started as a login session will read configuration details from the /etc/profile file first. It will then look for the first login shell configuration file in the user’s home directory to get user-specific configuration details.

It reads the first file that it can find out of ~/.bash_profile, ~/.bash_login, and ~/.profile and does not read any further files.

In contrast, a session defined as a non-login shell will read /etc/bash.bashrc and then the user-specific ~/.bashrc file to build its environment.

Non-interactive shells read the environmental variable called BASH_ENV and read the file specified to define the new environment.

Implementing Environmental Variables

As you can see, there are a variety of different files that we would usually need to look at for placing our settings.

This provides a lot of flexibility that can help in specific situations where we want certain settings in a login shell, and other settings in a non-login shell. However, most of the time we will want the same settings in both situations.

Fortunately, most Linux distributions configure the login configuration files to source the non-login configuration files. This means that you can define environmental variables that you want in both inside the non-login configuration files. They will then be read in both scenarios.

We will usually be setting user-specific environmental variables, and we usually will want our settings to be available in both login and non-login shells. This means that the place to define these variables is in the ~/.bashrc file.

Open this file now:

  1. nano ~/.bashrc

This will most likely contain quite a bit of data already. Most of the definitions here are for setting bash options, which are unrelated to environmental variables. You can set environmental variables just like you would from the command line:

  1. export VARNAME=value

Any new environmental variables can be added anywhere in the ~/.bashrc file, as long as they aren’t placed in the middle of another command or for loop. We can then save and close the file. The next time you start a shell session, your environmental variable declaration will be read and passed on to the shell environment. You can force your current session to read the file now by typing:

  1. source ~/.bashrc

If you need to set system-wide variables, you may want to think about adding them to /etc/profile, /etc/bash.bashrc, or /etc/environment.

Conclusion

Environmental and shell variables are always present in your shell sessions and can be very useful. They are an interesting way for a parent process to set configuration details for its children, and are a way of setting options outside of files.

This has many advantages in specific situations. For instance, some deployment mechanisms rely on environmental variables to configure authentication information. This is useful because it does not require keeping these in files that may be seen by outside parties.

There are plenty of other, more mundane, but more common scenarios where you will need to read or alter the environment of your system. These tools and techniques should give you a good foundation for making these changes and using them correctly.

Spin up a real linux environment on a hosted virtual machine in seconds with DigitalOcean Droplets! Simple enough for any user, powerful enough for fast-growing applications or businesses.

Learn more here

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Hoping my trials might help someone else.

I am running Django on Ubuntu 14.4 with Gunicorn and nginx. Gunicorn was telling me I did not have my environment variables set (so it couldn’t find my SECRET_KEY). I added my environment variables to absolutely everywhere I could think of:

~/.bashrc ~/.profile /etc/bash.bashrc /etc/profile.d /etc/environment

With no luck. As it turns out, in a far corner of the Internet, someone posted that for Gunicorn, you need to define environment variables within gunicorn.conf. I set them there and it worked, e.g.

env DATABASE_PASSWORD="secret_password"

It was incredibly frustrating to not find this information in any of the hundreds of environmental variable tutorials online. Hoping this info can spare someone else the pain.

This is a really well written article. I just read it and now I feel like I understand environment variables. I registered an account just to thank you for writing this, I will be reading more of your articles in the future. Thanks for putting this together.

i’m trying to read a property (java -XshowSetting) from a UNIX .sh-file / or bash-console. Normally it’s easy to ready a property by using (printenv | grep JAVA_HOME) BUT NOT in case (java -XshowSetting).

What i whant something like that: (java -XshowSetting | grep file.encoding) BUT it doesn’t work. Someone an idea HOTWO extract this property?

Nicely explained, gives me a better understanding. Thanks

Really nice job.

thanks the author alot! :)

Great tutorial. Certainly will be my refrence.

This was a very useful and well written tutorial, thank you!

Is it ~/.bash.rc or ~/.bashrc? Is there a file such as /etc/baash.bashrc? I can’t find /etc/bash.bashrc as well on my CoreOS machine

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel