By Etel Sverdlov and Brian Boucheron
The Secure Shell Protocol (or SSH) is a cryptographic network protocol that allows users to securely access a remote computer over an unsecured network.
Though SSH supports password-based authentication, it is generally recommended that you use SSH keys instead. SSH keys are a more secure method of logging into an SSH server, because they are not vulnerable to common brute-force password hacking attacks.
Generating an SSH key pair creates two long strings of characters: a public and a private key. You can place the public key on any server, and then connect to the server using an SSH client that has access to the private key.
When the public and private keys match up, the SSH server grants access without the need for a password. You can increase the security of your key pair even more by protecting the private key with an optional (but highly encouraged) passphrase.
Note: If you are looking for information about setting up SSH keys in your DigitalOcean account, please refer to our DigitalOcean product documentation on SSH Keys
The first step is to create a key pair on the client machine. This will likely be your local computer. Type the following command into your local command line:
- ssh-keygen -t ed25519
OutputGenerating public/private ed25519 key pair.
You will see a confirmation that the key generation process has begun, and you will be prompted for some information, which we will discuss in the next step.
Note: if you are on an older system that does not support creating
ed25519 key pairs, or the server you’re connecting to does not support them, you should create a strong
rsa keypair instead:
- ssh-keygen -t rsa -b 4096
This changes the
-t “type” flag to
rsa, and adds the
-b 4096 “bits” flag to create a 4096 bit key.
The first prompt from the
ssh-keygen command will ask you where to save the keys:
OutputEnter file in which to save the key (/home/sammy/.ssh/id_ed25519):
You can press
ENTER here to save the files to the default location in the
.ssh directory of your home directory.
Alternately, you can choose another file name or location by typing it after the prompt and hitting
The second and final prompt from
ssh-keygen will ask you to enter a passphrase:
OutputEnter passphrase (empty for no passphrase):
It’s up to you whether you want to use a passphrase, but it is strongly encouraged: the security of a key pair, no matter the encryption scheme, still depends on the fact that it is not accessible to anyone else.
Should a private key with no passphrase fall into an unauthorized user’s possession, they will be able to log in to any server you’ve configured with the associated public key.
The main downside to having a passphrase — typing it in — can be mitigated by using an
ssh-agent service, which will temporarily store your unlocked key and make it accessible to the SSH client. Many of these agents are integrated with your operating system’s native keychain, making the unlocking process even more seamless.
To recap, the entire key generation process looks like this:
- ssh-keygen -t ed25519
OutputGenerating public/private ed25519 key pair. Enter file in which to save the key (/home/sammy/.ssh/id_ed25519): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/sammy/.ssh/id_ed25519 Your public key has been saved in /home/sammy/.ssh/id_ed25519.pub The key fingerprint is: SHA256:EGx5HEXz7EqKigIxHHWKpCZItSj1Dy9Dqc5cYae+1zc sammy@hostname The key's randomart image is: +--[ED25519 256]--+ | o+o o.o.++ | |=oo.+.+.o + | |*+.oB.o. o | |*. + B . . | | o. = o S . . | |.+ o o . o . | |. + . ... . | |. . o. . E | | .. o. . . | +----[SHA256]-----+
The public key is now located in
/home/sammy/.ssh/id_ed25519.pub. The private key is now located in
Once the key pair is generated, it’s time to place the public key on the server that you want to connect to.
You can copy the public key into the server’s
authorized_keys file with the
ssh-copy-id command. Make sure to replace the example username and address:
- ssh-copy-id sammy@your_server_address
Once the command completes, you will be able to log into the server via SSH without being prompted for a password. However, if you set a passphrase when creating your SSH key, you will be asked to enter the passphrase at that time. This is your local
ssh client asking you to decrypt the private key, it is not the remote server asking for a password.
Once you have copied your SSH keys onto the server, you may want to completely prohibit password logins by configuring the SSH server to disable password-based authentication.
Warning: before you disable password-based authentication, be certain you can successfully log onto the server with your SSH key, and that there are no other users on the server using passwords to log in.
In order to disable password-based SSH authentication, open up the SSH configuration file. It is typically found at the following location:
- sudo nano /etc/ssh/sshd_config
This command will open up the file within the
nano text editor. Find the line in the file that includes
PasswordAuthentication (or create the line if it doesn’t exist), make sure it is not commented out with a
# at the beginning of the line, and change it to
Save and close the file when you are finished. In
CTRL+O to save, hit
ENTER to confirm the filename, then
CTRL+X to exit.
sshd service to put these changes into effect:
- sudo systemctl reload sshd
Before exiting your current SSH session, make a test connection in another terminal to verify you can still connect.
In this tutorial we created an SSH key pair, copied our public key to a server, and (optionally) disabled password-based authentication completely.
For more information about SSH and the SSH service, including how to set up multifactor authentication, please read our related tutorials:
We’ve made it super easy to add SSH Keys to your new or existing DigitalOcean virtual machines.
Join our DigitalOcean community of over a million developers for free! Get help and share knowledge in our Questions & Answers section, find tutorials and tools that will help you grow as a developer and scale your project or business, and subscribe to topics of interest.Sign up now
This textbox defaults to using Markdown to format your answer.
You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!
Dear Digital Ocean. You guys make the best tutorials. Thank you so much.
If you don’t have ssh-copy-id you can use the following command: cat ~/.ssh/id_rsa.pub | ssh user@machine “cat >> ~/.ssh/authorized_keys”
Why enable root login over ssh at all? Add your normal admin user to the admin group, or add an entry to the /etc/sudoers file (as described in https://www.digitalocean.com/community/articles/how-to-add-and-delete-users-on-ubuntu-12-04-and-centos-6) and use sudo. If you need full root login, then just use sudo su - root
When trying to connect, it asks me for a password and I did not enter one upon configuration. I guess I’m locked out of my virtual machine.
there should be an article that explains how to setup users + sudo + SSH key authentication and disable password authentication altogether + fail2ban + disable root login
Just to keep it simple for people who don’t really know what they are doing :)
Totally not working for me. I’m rebuilding my virtual machine for the second time.
I cannot finish step 3. I get blah blah blah port 22: Connection refused
I changed the port as recommended by a previous tutorial.
For those who are trying to add a new key to an existing droplet - READ THIS!!!
If you are getting the “Permission denied (publickey)” when trying to copy your public key to the server, you likely have password authentication disabled in your droplet.
How to fix this: Log in to your DigitalOcean account and open the console for the drop you are trying to access. While inside the console do the following:
Scroll down to the very bottom and look for the following directives:
If UsePAM is set to ‘yes’ and PasswordAuthentication is set to ‘no’ change those to the opposite. It should read the following:
:(colon), and type
This will quit vim editor.
Now go back to your terminal or putty and pick up at the step where it has you copying your local rsa public key to the server. You should now be presented with a request for a password instead of public key denied. Type in your droplet password and hit enter. You should know be inside your server.
Now you can change those settings back from Putty or Terminal by typing the following:
Change the directives back to what they were and press
:(colon), and type
Now you can quit the session by typing
exitand try to login with just ssh by typing:
Now you should be able to access your server via SSH with your newly created SSH key!
This was a PITA to figure out, but that is what got it all done for me.
On a Mac you first need to do this
brew install ssh-copy-id
If you don’t have ssh-copy-id but you have brew (osx)