Tutorial

Securing Communications in a Three-tier Rails Application Using SSH Tunnels

Securing Communications in a Three-tier Rails Application Using SSH Tunnels

Introduction

Web applications are often architected with three distinct tiers:

  • The first tier is the presentation layer, which is what the user sees.
  • Next comes the application layer, which provides the business logic of the application.
  • Finally, the data layer stores the data needed by the application.

In a Ruby on Rails application, this maps loosely to a web server for the presentation layer, a Rails server for the application layer, and a database for the data layer. In this setup, the application layer communicates with the data layer to retrieve data for the application which is then displayed to the user through the presentation layer.

While it is possible to install all these applications on a single server, putting each layer onto its own server makes it easier to scale the application. For instance, if the Rails server were to become a bottleneck, you could add more application servers without affecting the other two layers.

In this tutorial, you will deploy a Rails app in a three-tier configuration by installing a unique set of software on three separate servers, configuring each server and its components to communicate and function together, and securing the connections between them with SSH tunnels. For the software stack, you will use Nginx as the web server on the presentation layer, Puma as the Rails application server on the application layer, and PostgreSQL as the database on the data layer.

Prerequisites

In order to complete this tutorial, you will need to spin up three Ubuntu 16.04 servers. Name these web-server, app-server, and database-server, and each should have Private Networking enabled.

Each of the three servers should have a non-root user with sudo privileges as well as a firewall configured to allow SSH ocnnections (which you can configure using our Initial Server Setup guide). In the context of this tutorial, the sudo user on each server is named sammy.

Additionally, each of the three servers have their own unique configuration requirements:

  • On the web-server:

  • On the app-server:

    • Install Node.js using the official PPA, as explained in How To Install Node.js on Ubuntu 16.04. A few Rails features, such as the Asset Pipeline, depend on a JavaScript Runtime and Node.js provides this functionality.
    • Install the Ruby on Rails framework. To do this, follow our guide on How to Install Ruby on Rails with rbenv on Ubuntu 16.04. As you follow this tutorial, be sure to install the latest version of Ruby which, at the time of this writing, is Ruby 2.5.1.
    • Install PostgreSQL, as shown in the first section of our tutorial How To Use PostgreSQL with Your Ruby on Rails Application on Ubuntu 14.04. This section also describes how to install libpq-dev, another package required for this three-tier setup.
    • Deploy a Rails app using Puma. If you don’t have an app of your own to deploy, follow our guide on How To Deploy a Rails App with Puma and Nginx to deploy a sample app. Note that in the “Install rbenv-vars Plugin” section of this prerequisite, you must set the database user and password to reflect the values you use when you install PostgreSQL on the database-server. Also, you must allow port 3000 through your firewall for the “Create Production Database” section to work. Lastly, you do not need to complete the final two steps of this prerequisite tutorial, “Create Puma Upstart Script” and “Install and Configure Nginx”.
  • On the database-server:

    • Install and configure the PostgreSQL database software. Follow our guide on How To Install and Use PostgreSQL on Ubuntu 16.04 for instructions on how to do this. As you follow this prerequisite tutorial, create a PostgreSQL role for your Rails app with superuser permissions as well as a database with the same name as the PostgreSQL role. Throughout this tutorial, the PostgreSQL role and database are both called sammy.
    • Set a password for the newly created PostgreSQL role. Skip the first command in the “Create Production Database User” section of the Puma tutorial (which you also used to set up the app-server), and follow the remaining commands in that section to change the password of the database user. Note that the name of the PostgreSQL role and the password you set for the database-server should be identical to those that you set on the app-server’s PostgreSQL installation.

Step 1 — Creating a User for the SSH Tunnels

SSH tunnels are encrypted connections that can send data from a port on one server to a port on another server, making it look as though a listening program on the second server is running on the first one. Having a dedicated user for the SSH tunnels helps to improve the security of your setup: should an intruder gain access to the sammy user on one of your servers, they will not be able to access the other servers in the three-tier setup. Likewise, if an intruder were to gain access to the tunnel user, they will neither be able to edit files in the Rails app directory nor could they use the sudo command.

On each server, create an additional user named tunnel. The tunnel user’s only function is to create SSH tunnels to facilitate communication between the servers, so, unlike sammy, do not give tunnel sudo privileges. Also, the tunnel user should not have write access to the Rails app directory. Run the following command on each server to add the tunnel user:

  1. sudo adduser tunnel

On the web-server machine, switch to the tunnel user.

  1. sudo su tunnel

As the tunnel user, generate an SSH key pair:

  1. ssh-keygen

Save the key in the default location and do not create a passphrase for the keys, as doing so could complicate authentication later on when you create SSH tunnels between the servers.

After creating the key pair, return to the sammy user:

  1. exit

Now switch to the app-server and execute the same commands again:

  1. sudo su tunnel
  2. ssh-keygen
  3. exit

You have now configured all the users you will need for the rest of the tutorial. Net, you’ll make some changes to the the /etc/hosts file for each tunnel user in order to streamline the process of creating the SSH tunnels.

Step 2 — Configuring the Hosts File

Throughout this tutorial, there are many times when you must refer to the IP addresses of either the app-server or the database-server in a command. Rather than having to remember and type out these IP addresses each time, you can add the app-server and database-server’s private IPs to each server’s /etc/hosts file. This will allow you to use their names in subsequent commands in place of their addresses, and will make the process of setting up SSH tunnels much smoother.

Please note that, in order to keep things simple, this tutorial instructs you to add both the app-server and database-server’s private IP addresses to the /etc/hosts file on each of the three servers. While it technically isn’t necessary to add either the app-server or database-server’s private IP addresses to their own hosts files, doing so won’t cause any issues. The method described here was chosen simply for speed and convenience.

First, find your app-server and database-server’s private IP addresses. If you’re using DigitalOcean Droplets, navigate to your Control Panel and click on these Droplets’ names. On any of their Droplet-specific pages, both the public and private IP addresses are displayed near the top of the page.

Then on each server, open the /etc/hosts file with your favorite text editor and append the following lines:

  1. sudo nano /etc/hosts
/etc/hosts
. . .
app-server_private_ip app-server
database-server_private_ip database-server

By adding these lines to this file on each server, you can use the names app-server and database-server in commands that would typically require you to use these servers’ IP addresses. You will use this functionality to set up the SSH keys so each of your tunnel users can connect to your other servers.

Step 3 — Setting up SSH Logins

Now that you have a tunnel user and an updated /etc/hosts file on all three of your servers, you’re ready to begin creating SSH connections between them.

As you go through this step, think of the three tiers like a pyramid, with the database-server at the bottom, the app-server in the middle, and the web-server at the top. The app-server must be able to connect to the database-server in order to access the data needed for the Rails app, and the web-server must be able to connect to the app-server so it has something to present to users.

Thus, you only need to add each tunnel user’s SSH public key to the server “underneath” it, meaning that you must add the web-server tunnel user’s public key to the app-server and add the app-server tunnel user’s public key to the database-server. This will allow you to establish encrypted SSH tunnels between the tiers and prevent any eavesdroppers on the network from reading the traffic passing between them.

To begin this process, copy the public key of the tunnel user on the web-server, located at /home/tunnel/.ssh/id_rsa.pub, into the /home/tunnel/.ssh/authorized_keys file on the app-server.

On the web-server, display the tunnel user’s public key in the terminal with the following command:

  1. sudo cat /home/tunnel/.ssh/id_rsa.pub

Select the text output and copy it to your system’s clipboard.

SSH into the app-server in a separate terminal session, and switch to the tunnel user:

  1. sudo su tunnel

Append the key in your system’s clipboard to the authorized_keys file on the app-server. You can use the following command to do so in one step. Remember to replace tunnel_ssh_publickey_copied_from_web_server with the public key in your system’s clipboard:

  1. echo "tunnel_ssh_publickey_copied_from_web-server" >> /home/tunnel/.ssh/authorized_keys

After that, modify the permissions on the authorized_keys file to prevent unauthorized access to it:

  1. chmod 600 /home/tunnel/.ssh/authorized_keys

Then return to the sammy user:

  1. exit

Next, display the public key of the tunnel user on the app-server — located at /home/tunnel/.ssh/id_rsa.pub — and paste it into the /home/tunnel/.ssh/authorized_keys file on the database-server:

  1. sudo cat /home/tunnel/.ssh/id_rsa.pub
  1. sudo su tunnel

Because you did not generate a SSH key pair on the database-server, you’ll have to create the /home/tunnel/.ssh folder and adjust its permissions:

  1. mkdir /home/tunnel/.ssh
  2. chmod 700 /home/tunnel/.ssh

Then add the app-server’s public key to the authorized_keys file and adjust its permissions:

  1. echo "tunnel_ssh_publickey_copied_from_app-server" >> /home/tunnel/.ssh/authorized_keys
  2. chmod 600 /home/tunnel/.ssh/authorized_keys

Then return to the sammy user:

  1. exit

Next, test the first connection by using SSH to connect to the app-server from your web-server as the tunnel user:

  1. sudo su tunnel
  1. ssh tunnel@app-server

The first time you connect from the web-server to the app-server, you will see a message asking you to confirm that the machine you’re connecting to can be trusted. Type “yes” to accept the authenticity of the app-server:

Output
The authenticity of host '111.111.11.111 (111.111.11.111)' can't be established. ECDSA key fingerprint is fd:fd:d4:f9:77:fe:73:84:e1:55:00:ad:d6:6d:22:fe. Are you sure you want to continue connecting (yes/no)? yes

You will see the welcome banner from the app-server and the command prompt will show that you are logged in to the app-server. This confirms that the SSH connection from the web-server to the app-server is functioning correctly.

Exit from the SSH connection to the app-server, and then exit from the tunnel user to return to your web-server’s sammy user:

  1. exit
  2. exit

Next, follow these same steps to test the SSH connection from the app-server to the database-server:

  1. sudo su tunnel
  1. ssh tunnel@database-server

Accept the authenticity of the database-server as well. When you see the welcome banner and command prompt from the database-server, you will know that the SSH connection from the app-server to the database-server is working as expected.

Exit from the SSH connection to the database-server, and then exit from the tunnel user:

  1. exit
  2. exit

The SSH connections you’ve set up in the step form the basis of the SSH tunnels that will enable secure communications between your three server tiers. However, in their current form, these connections are vulnerable to crashing and therefore they aren’t as reliable as they could be. By installing some additional software and configuring the tunnel to function as a service, though, you can mitigate these vulnerabilities.

Step 4 — Setting up a Persistent SSH Tunnel to the Database Server

In the last step, you accessed the command prompt on a remote server from a local one. An SSH tunnel allows you to do much more than this by tunneling traffic from ports on the local host to ports on the remote one. Here, you will use an SSH tunnel to encrypt the connection between your app-server and the database-server.

If you followed along with all the prerequisites for this tutorial, you will have installed PostgreSQL on both the app-server and the database-server. To prevent a clash in port numbers, you must configure the SSH tunnel between these servers to forward connections from port 5433 of the app-server to port 5432 on the database-server. Later on, you will reconfigure your Rails application (hosted on your app-server) to use the instance of PostgreSQL running on the database-server.

Starting as the sammy user on the app-server, switch to the tunnel user you created in Step 1:

  1. sudo su tunnel

Run the ssh command with the following flags and options to create the tunnel between the app-server and database-server:

  1. ssh -f -N -L 5433:localhost:5432 tunnel@database-server
  • The -f option sends ssh to the background. This allows you to run new commands in your existing prompt while the tunnel continues running as a background process.
  • The -N option tells ssh not to execute a remote command. This is used here as you only want to forward ports.
  • The -L option is followed by the configuration value 5433:localhost:5432. This specifies that traffic from port 5433 on the local side (the app-server) is forwarded to localhost’s port 5432 on the remote server (the database-server). Note that localhost here is from the point of view of the remote server.
  • The final part of the command, tunnel@database-server, specifies the user and remote server to connect to.

After establishing the SSH tunnel, return to the sammy user:

  1. exit

At this point, the tunnel is running, but there is nothing watching it to ensure that it stays up. If the process crashes, the tunnel will go down, the Rails app will no longer be able to communicate with its database, and you will start seeing errors.

Kill the tunnel you have created for now as we are going to make a more reliable setup. Since the connection is in the background, you will have to find its process ID to kill it. Because every tunnel is created by the tunnel user, you can find its proccess ID by listing the current processes and filtering the output for the keyword ‘tunnel’:

  1. ps axu | grep tunnel

This will return something like the output below:

Output
tunnel 21814 0.0 0.1 44920 692 ? Ss 14:12 0:00 ssh -f -N -L 5433:localhost:5432 tunnel@database-server sammy 21816 0.0 0.2 12916 1092 pts/0 S+ 14:12 0:00 grep --color=auto tunnel

Stop the process by running the kill command followed by its process ID:

  1. sudo kill 21814

To maintain a persistent SSH connection between the application server and the database, install autossh. autossh is a program that starts and monitors an SSH connection, and restarts it should the connection die or stop passing traffic:

  1. sudo apt-get install autossh

systemd is the default init system on Ubuntu, meaning that it manages processes after the system boots. You can use systemd to create a service that will manage and automatically start your SSH tunnel when the server restarts. To do this, create a file called db-tunnel.service within the /lib/systemd/system/ directory, the standard location where systemd unit files are stored:

  1. sudo nano /lib/systemd/system/db-tunnel.service

Add the following content to the new file to configure a service for systemd to manage:

/lib/systemd/system/db-tunnel.service

[Unit]
Wants=network-online.target
After=network-online.target

[Service]
User=tunnel
WorkingDirectory=/home/tunnel
ExecStart=/bin/bash -lc 'autossh -N -L 5433:localhost:5432 tunnel@database-server'
Restart=always
StandardInput=null
StandardOutput=syslog
StandardError=syslog
SyslogIdentifier=%n
KillMode=process

[Install]
WantedBy=multi-user.target

The key line here is ExecStart. This specifies the full path to the command and the arguments it needs to execute in order to start the process. Here, it starts a new bash shell and then runs the autossh program.

Save and close the file, and then reload the systemd configuration to make sure that it picks up the new service file:

  1. sudo systemctl daemon-reload

Enable the db-tunnel service so the tunnel to the database-server starts automatically whenever the server boots up:

  1. sudo systemctl enable db-tunnel.service

Then, start the service:

  1. sudo systemctl start db-tunnel.service

Run the following command again to check whether the tunnel is up:

  1. ps axu | grep tunnel

In the output, you will see that there are more processes running this time because autossh is now monitoring the tunnel:

Output
tunnel 25925 0.0 0.1 4376 704 ? Ss 14:45 0:00 /usr/lib/autossh/autossh -N -L 5432:localhost:5432 tunnel@database-server tunnel 25939 0.2 1.0 44920 5332 ? S 14:45 0:00 /usr/bin/ssh -L 61371:127.0.0.1:61371 -R 61371:127.0.0.1:61372 -N -L 5432:localhost:5432 tunnel@database-server sammy 25941 0.0 0.2 12916 1020 pts/0 S+ 14:45 0:00 grep --color=auto tunnel

Now that the tunnel is up and running, you can test the connection to the database-server with psql to ensure that it is working correctly.

Start the psql client and tell it to connect to localhost. You must also specify port 5433 to connect through the SSH tunnel to the PostgreSQL instance on the database-server. Specify the database name you created earlier, and key in the password you created for the database user when prompted:

  1. psql -hlocalhost -p5433 sammy

If you see something like the following output, the database connection has been set up correctly:

Output
psql (9.5.10) SSL connection (protocol: TLSv1.2, cipher: ECDHE-RSA-AES256-GCM-SHA384, bits: 256, compression: off) Type "help" for help. sammy=#

To close the PostgreSQL prompt, type \q and then press ENTER.

At last, you have a persistent, reliable SSH tunnel that encrypts traffic between your app-server and database-server. The tunnel’s security features are key, because it is over this tunnel that the Rails app on your app-server will communicate with the PostgreSQL instance on your database-server.

Step 5 — Configuring Rails to Use a Remote Database

Now that the tunnel from the app-server to the database-server is set up, you can use it as a secure channel for your Rails app to connect through the tunnel to the PostgreSQL instance on the database-server.

Open the application’s database configuration file:

  1. nano /home/sammy/appname/config/database.yml

Update the production section so the port number is specified as an environment variable. It should now look something like this:

/home/sammy/appname/config/database.yml
. . .
production:
  <<: *default
  host: localhost
  adapter: postgresql
  encoding: utf8
  database: appname_production
  pool: 5
  username: <%= ENV['APPNAME_DATABASE_USER'] %>
  password: <%= ENV['APPNAME_DATABASE_PASSWORD'] %>
  port: <%= ENV['APPNAME_DATABASE_PORT'] %>

Save and close this file, then open the .rbenv-vars file in the application directory and edit the environment variables:

  1. nano /home/sammy/appname/.rbenv-vars

If you set a different name and password for the PostgreSQL role on the database-server, replace them now (in the example below, the PostgreSQL role is named sammy). Also, add a new line to specify the database port. After making these changes, your .rbenv-vars file should look like this:

/home/sammy/appname/.rbenv-vars

SECRET_KEY_BASE=secret_key_base
APPNAME_DATABASE_USER=sammy
APPNAME_DATABASE_PASSWORD=database_password
APPNAME_DATABASE_PORT=5433

Save and close this file when finished.

Because you are now using the PostgreSQL instance on the database-server instead of the one on the app-server where you deployed your Rails app, you will have to set up the database again.

On the app-server, navigate to your app’s directory and run the rake command to set up the database:

Note: This command will not migrate any data from the existing database to the new one. If you have important data on your database already, you should back it up and then restore it later.

  1. cd /home/sammy/appname
  2. rake db:setup

Once this command completes, your Rails app will begin communicating with the PostgreSQL instance on the database-server over an encrypted SSH tunnel. The next thing to do is configure Puma as a systemd service to make it easier to manage.

Step 6 — Configuring and Starting Puma

Similar to how you set up the db-tunnel service in Step 4, you will configure systemd to run Puma (the server software you installed on the app-server as part of the prerequisites) as a service. Running Puma as a service allows it to start automatically when the server boots or restart automatically if it crashes, helping to make your deployment more robust.

Create a new file called puma.service within the /lib/systemd/system/ directory:

  1. sudo nano /lib/systemd/system/puma.service

Add the following content, which was adapted from Puma’s systemd documentation, to the new file. Be sure to update the highlighted values in the User, WorkingDirectory, and ExecStart directives to reflect your own configuration:

/lib/systemd/system/puma.service

[Unit]
Description=Puma HTTP Server
After=network.target

[Service]
# Foreground process (do not use --daemon in ExecStart or config.rb)
Type=simple

# Preferably configure a non-privileged user
User=sammy

# The path to the puma application root
# Also replace the "<WD>" place holders below with this path.
WorkingDirectory=/home/sammy/appname

# Helpful for debugging socket activation, etc.
# Environment=PUMA_DEBUG=1

Environment=RAILS_ENV=production

# The command to start Puma.
ExecStart=/home/sammy/.rbenv/bin/rbenv exec bundle exec puma -b tcp://127.0.0.1:9292

Restart=always

[Install]
WantedBy=multi-user.target

Save and close the file. Then reload systemd, enable the Puma service, and start Puma:

  1. sudo systemctl daemon-reload
  2. sudo systemctl enable puma.service
  3. sudo systemctl start puma.service

After this, confirm that Puma is running by checking the service’s status:

  1. sudo systemctl status puma.service

If it is running, you will see an output similar to this:

Output
puma.service - Puma HTTP Server Loaded: loaded (/lib/systemd/system/puma.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2017-12-26 05:35:50 UTC; 1s ago Main PID: 15051 (bundle) Tasks: 2 Memory: 31.4M CPU: 1.685s CGroup: /system.slice/puma.service └─15051 puma 3.11.0 (tcp://127.0.0.1:9292) [appname] Dec 26 05:35:50 app systemd[1]: Stopped Puma HTTP Server. Dec 26 05:35:50 app systemd[1]: Started Puma HTTP Server. Dec 26 05:35:51 app rbenv[15051]: Puma starting in single mode... Dec 26 05:35:51 app rbenv[15051]: * Version 3.11.0 (ruby 2.4.3-p205), codename: Love Song Dec 26 05:35:51 app rbenv[15051]: * Min threads: 5, max threads: 5 Dec 26 05:35:51 app rbenv[15051]: * Environment: production

Next, use curl to access and print the contents of the web page so you can check that it is being served correctly. The following command tells curl to visit the the Puma server you just started on app-server on port 9292:

  1. curl localhost:9292/tasks

If you see something like the code below, then it confirms that both Puma and the database connection are working correctly:

Output
... <h1>Tasks</h1> <table> <thead> <tr> <th>Title</th> <th>Note</th> <th colspan="3"></th> </tr> </thead> <tbody> </tbody> </table> ...

Once you can confirm that your Rails app is being served by Puma and is correctly configured to use a remote PostgreSQL instance on the database-server, you can move on to setting up the SSH tunnel between the web-server and the app-server.

Step 7 — Setting up and Persisting the SSH Tunnel to the App Server

Now that the app-server is up and running, you can connect it to the web-server. Similarly to the process you went through in Step 4, you will do this by setting up another SSH tunnel. This tunnel will allow Nginx on the web-server to connect securely over an encrypted connection to Puma on the app-server.

Start by installing autossh on the web-server:

  1. sudo apt-get install autossh

Create a new file called app-tunnel.service in the /lib/systemd/system/ directory:

  1. sudo nano /lib/systemd/system/app-tunnel.service

Add the following content to this file. Again, the key line is the one that begins with ExecStart. Here, this line forwards port 9292 on the web-server to port 9292 on the app-server where Puma is listening:

/lib/systemd/system/app-tunnel.service

[Unit]
StopWhenUnneeded=true
Wants=network-online.target
After=network-online.target

[Service]
User=tunnel
WorkingDirectory=/home/tunnel
ExecStart=/bin/bash -lc 'autossh -N -L 9292:localhost:9292 tunnel@app-server'
Restart=always
StandardInput=null
StandardOutput=syslog
StandardError=syslog
SyslogIdentifier=%n
KillMode=process

[Install]
WantedBy=multi-user.target

Note: The port number in the ExecStart line is the same as the one configured for Puma in the previous step.

Reload systemd so it reads the new service file, then enable and start the app-tunnel service:

  1. sudo systemctl daemon-reload
  2. sudo systemctl enable app-tunnel.service
  3. sudo systemctl start app-tunnel.service

Check that the tunnel is up:

  1. ps axu | grep tunnel

You should see something resembling the output below:

Output
tunnel 19469 0.0 0.1 4376 752 ? Ss 05:45 0:00 /usr/lib/autossh/autossh -N -L 9292:localhost:9292 tunnel@app-server tunnel 19482 0.5 1.1 44920 5568 ? S 05:45 0:00 /usr/bin/ssh -L 54907:127.0.0.1:54907 -R 54907:127.0.0.1:54908 -N -L 9292:localhost:9292 tunnel@app-server sammy 19484 0.0 0.1 12916 932 pts/0 S+ 05:45 0:00 grep --color=auto tunnel

This filtered process listing shows that autossh is running and it has started another ssh process which creates the actual encrypted tunnel between web-server and app-server.

Your second tunnel is now up and encrypting communication between your web-server and app-server. All that’s left for you to do in order to get your three-tier Rails app up and running is to configure Nginx to pass requests to Puma.

Step 8 — Configuring Nginx

At this point, all the required SSH connections and tunnels have been set up and each of your three server tiers are able to communicate with one another. The final piece of this puzzle is for you to configure Nginx to send requests to Puma to make the setup fully functional.

On the web-server, create a new Nginx configuration file at /etc/nginx/sites-available/appname:

  1. sudo nano /etc/nginx/sites-available/appname

Add the following content into the file. This Nginx configuration file is similar to the one you used if you followed our guide on How To Deploy a Rails App with Puma and Nginx. The main difference is the location of the upstream app; instead of using the local socket file, this configuration points Nginx to the SSH tunnel listening on port 9292:

/etc/nginx/sites-available/appname
upstream app {
    server 127.0.0.1:9292;
}

server {
    listen 80;
    server_name localhost;

    root /home/sammy/appname/public;

    try_files $uri/index.html $uri @app;

    location @app {
        proxy_pass http://app;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_redirect off;
    }

    error_page 500 502 503 504 /500.html;
    client_max_body_size 4G;
    keepalive_timeout 10;
}

Save and close this file, then enable the site and make the changes active.

First, remove the default site:

  1. sudo rm /etc/nginx/sites-enabled/default

Change to the Nginx sites-enabled directory:

  1. cd /etc/nginx/sites-enabled

Create a symbolic link in the sites-enabled directory to the file you created just now in the sites-available directory:

  1. sudo ln -s /etc/nginx/sites-available/appname appname

Test your Nginx configuration for syntax errors:

  1. sudo nginx -t

If any errors are reported, go back and check your file before continuing.

When you’re ready, restart Nginx so it reads your new configuration:

  1. sudo systemctl restart nginx

If you followed the Puma tutorial in the prerequisites, you would have installed Nginx and PostgreSQL on the app-server. Both were replaced by separate instances running on the other two servers, so these programs are redundant. Therefore, you should remove these packages from the app-server:

  1. sudo apt remove nginx
  2. sudo apt remove postgresql

After removing these packages, be sure to update your firewall rules to prevent any unwanted traffic from accessing these ports.

Your Rails app is now in production. Visit your web-server’s public IP in a web browser to see it in action:

http://web-server_public_IP/tasks

Conclusion

By following this tutorial, you have deployed your Rails application on a three-tiered architecture and secured the connections from your web-server to the app-server, and from the app-server to the database-server with encrypted SSH tunnels.

With the various components of your application on separate servers, you can pick the optimal specifications for each server based on the amount of traffic your site receives. The first step to doing this is to monitor the resources the server is consuming. See our guide on CPU monitoring for instructions on how to monitor your servers’ CPU usage. If you see that CPU or memory usage on one tier is very high, you can resize the server on that tier alone. For more advice on picking a server size, see our guide on Choosing the Right Droplet for Your Application.

As an immediate next step, you should also secure the connection from your users to the web-server by installing an SSL certificate on the web-server. Check out the Nginx Let’s Encrypt tutorial for instructions. Also, if you’d like to learn more about using SSH tunnels check out this guide.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors
Default avatar
Li Heng Fong

author


Default avatar

Manager, Developer Education

Technical Writer @ DigitalOcean


Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
2 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Or or… you can just hear me out … use private network between rails app and the database server which is a click away then in postgres ha_conf only allow I.P from app server then use firewall to only allow I.P from app server then generate cert and enable postgres ssl connection and copy the cert over to app server just like everyone else.

So to be sure, this isn’t a way to make a Rails API (app-server) with a Rails front-end (web-server) – the app-server is the only part of this three-tiered arrangement that uses Rails. I think this approach makes sense between the app-server and the database-server, but I don’t personally understand the purpose of the web-server here. It’s just taking the requests and forwarding them to the app-server. Does this provide a real benefit? To me, it looks like the web-server isn’t taking much load off anything, is it?

UPDATE: Actually, if you set up multiple droplets of app-server, you can balance the load with Nginx.

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more