How To Configure Logging And Log Rotation In Apache On An Ubuntu VPS

How To Configure Logging And Log Rotation In Apache On An Ubuntu VPS

Status: Deprecated

This article covers a version of Ubuntu that is no longer supported. If you are currently operate a server running Ubuntu 12.04, we highly recommend upgrading or migrating to a supported version of Ubuntu:

Reason: Ubuntu 12.04 reached end of life (EOL) on April 28, 2017 and no longer receives security patches or updates. This guide is no longer maintained.

See Instead:
This guide might still be useful as a reference, but may not work on other Ubuntu releases. If available, we strongly recommend using a guide written for the version of Ubuntu you are using. You can use the search functionality at the top of the page to find a more recent version.


The Apache web server can be configured to give the server administrator important information about how it is functioning and what issues, if any, need to be addressed.

The main avenue for providing feedback to the administrator is through the use of log files. Apache has a very configurable logging mechanism that can be used to output messages to different places based on instructions.

In this guide, we will look at how to utilize Apache's logging functionality to set up structured, easy-to-parse logs. We will be using a default Apache2 installation on an Ubuntu 12.04 VPS. Other distributions should operate in a similar fashion.

Apache Log Levels

Apache separates all informational messages into categories depending on how important it considers the information.

For instance, for the most important messages, considered emergencies, Apache designates the log level as "emerg". The "info" tag, on the other hand, just shows helpful information that can be useful to look at occasionally.

Here are the log levels that Apache recognizes, from most important to least:

  • emerg: Emergency situations where the system is in an unusable state.
  • alert: Severe situation where action is needed promptly.
  • crit: Important problems that need to be addressed.
  • error: An Error has occurred. Something was unsuccessful.
  • warn: Something out of the ordinary happened, but not a cause for concern.
  • notice: Something normal, but worth noting has happened.
  • info: An informational message that might be nice to know.
  • debug: Debugging information that can be useful to pinpoint where a problem is occurring.
  • trace[1-8]: Tracing information of various levels of verbosity that produces a large amount of information.

When you specify a log level, you are not choosing to log the messages labeled in that category, you are choosing the least important level that you wish to log.

This means that any levels above the selected level are also logged. For example, if you choose the "warn" log level, messages tagged with warn, error, crit, alert, and emerg will all be logged.

We specify the level of logging desired with the "LogLevel" directive. We can see the default log level in the default configuration file:

sudo nano /etc/apache2/apache2.conf
. . .
LogLevel warn
. . .

As you can see, by default, we have Apache configured to log messages with a priority of "warn" and above. We will learn where Apache logs its messages in the following section.

Where does Apache Keep Its Logs?

Apache can be told where to place its logs using server-wide logging specifications. You can also configure logging individually for each separate virtual host.

Server-Wide Logging

To find out where the server logs information by default, we can open the default configuration file. On Ubuntu, this is "/etc/apache2/apache2.conf":

sudo nano /etc/apache2/apache2.conf

If we search the file, we can find a line that looks like this:

ErrorLog ${APACHE_LOG_DIR}/error.log

This directive names the file where Apache will keep its error messages. As you can see, it utilizes an environmental variable called "APACHE_LOG_DIR" to get the prefix of the directory path.

We can find out what the "APACHE_LOG_DIR" is set to by examining a different file, the aptly-named "envvars" file:

sudo nano /etc/apache2/envvars
. . .
export APACHE_LOG_DIR=/var/log/apache2$SUFFIX
. . .

We can see in this line, that the "APACHE_LOG_DIR" variable is set to the directory "/var/log/apache2". This means that when combined with the directive in the "apache2.conf" file, Apache will log into a file called "/var/log/apache2/error.log":

sudo ls /var/log/apache2
access.log  error.log  other_vhosts_access.log

We can see the error.log file and some other log files as well.

Virtual Host Logging

The "access.log" file at the end of the previous section is not configured in the "apache2.conf" file. Instead, the package maintainer decided to place the directive specifying its use within a virtual host definition.

Examine the default virtual host definition to see the access log declaration:

sudo nano /etc/apache2/sites-available/default

If we scroll through the file, we will see three separate values concerning logging:

. . .
ErrorLog ${APACHE_LOG_DIR}/error.log

LogLevel warn

CustomLog ${APACHE_LOG_DIR}/access.log combined
. . .

The ErrorLog definition matches the one in the default configuration file. It is not necessary to have that line in both places, but it does not hurt to be specific incase you change the location in one place or another.

Defining Custom Logs

In the previous section, the line describing the "access.log" file uses a different directive than the preceding log lines. It uses "CustomLog" to specify the access.log location:

CustomLog ${APACHE_LOG_DIR}/access.log combined

This directive takes the following syntax:

CustomLog log_location log_format

The log format in this example is "combined". This is not an internal Apache specification. Instead, this is a label for a custom format that is defined in the default configuration file.

If we open the default config file again, we can see the line that defines the "combined" log format:

sudo nano /etc/apache2/apache2.conf
. . .
LogFormat "%h %l %u %t \"%r\" %>s %O \"{Referer}i\" \"%{User-Agent}i\"" combined
. . .

The "LogFormat" command defines a custom format for logs that can be called using the "CustomLog" directive as we saw in the virtual host definition.

This log format specifies a format known as a "combined" format. Learn more about available format string variables by going here.

As you can see, there are several other common formats that have been created for use within your virtual host definitions. You can uses them exactly like you see the CustomLog declaration earlier. You can also create your own custom log formats.

Rotating Apache Log Files

Because Apache is capable of logging a large quantity of information during the process of handling requests from clients, it is necessary to set up a system for rotating the logs.

Log rotation can be as simple as switching out logs as they get too big, or it can be a system of archiving and storing old copies to reference at a later date. This depends on your configuration.

Below, we will discuss some different methods of achieving this.

Manually Rotating Logs

It is not possible to move log files while Apache is running, so instead, the server must be restarted in order to swap the old logs for fresh logs.

This can be accomplished manually by moving the files, then soft-restarting Apache so that it can begin to use the new logs for new connections.

The example used in the Apache documentation is here. You may need to precede these commands with "sudo" to gain appropriate privileges:

mv access_log access_log.old
mv error_log error_log.old
apachectl graceful
sleep 600
[post-processing of log files]

This will move the files, reload the server, and wait 600 seconds. This will allow Apache to continue using the old log files to complete logging from old requests. During this time, new requests will be logged to the new, refreshed files.

While it is good to know how to do this manually, this would be unsustainable for larger server environments.

Managing Log Rotation Using Logrotate

By default, Ubuntu sets up its own log rotation plan with logrotate.

This program can take parameters and rotate logs when certain criteria are met. We can see what events cause logrotate to swap the Apache logs by looking in "/etc/logrotate.d/apache2":

sudo nano /etc/logrotate.d/apache2

Here, you can see some of the parameters given to logrotate. First of all, notice the first line is:

/var/log/apache2/*.log {

This means that logrotate will only operate on those logs in "/var/log/apache2". Keep this in mind if you have chosen a different directory for your logs in your Apache configuration.

We can see that the logs are rotated weekly and that they save a years-worth of logs by default. We can also see that there is a section that reloads Apache after the rotation:

	/etc/init.d/apache2 reload > /dev/null

These lines make sure that apache is reloaded automatically whenever a rotation is complete. The parameters within this file can be changed at will, but the configuration is outside of the scope of this article.

Logging Using Pipes

Using a pipe instead of a file is an easy way to allow a separate logging program to handle the output. This solves the log rotation problem too, since that can be handled by the backend logging program instead of by Apache itself.

If we wanted the access log to be handled by a logging program that accepts standard input, we could change the line to this:

CustomLog "| logging_program logging_program_parameters" combined

Apache starts the logging program when it begins and restarts it if the logging process fails for any reason.

Although multiple programs can be configured to rotate logs, Apache includes one called "rotatelogs" by default. You can configure it as follows:

CustomLog "| /path/to/rotatelog /path/of/log/to/rotate number_of_seconds_between_rotations" log_level

Similar configuration can be achieved with other logging utilities.


It is important that you are logging everything that you need to correctly administrate your servers, and that you have a good log rotation mechanism in place in order to prevent files from growing too large.

You should now understand how to create and configure logging for Apache. The information that you have logged can be used to troubleshoot problems and anticipate when actions need to be taken.

By Justin Ellingwood

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about our products

About the authors

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?

This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

I using CentOS 7.3 and everything is going well, But access.log file has too many records that slow down the load for statistics. So I want records to be recorded every day.

This is my current setting

<VirtualHost *:80>
	ServerName www.example.com
	ServerAlias example.com
	DocumentRoot /home/example.com/public_html
	ErrorLog /home/example.com/logs/error.log
	CustomLog /home/example.com/logs/access.log combined

How to be like this


Example, today is 2017-05-29, I want to log file on


And tomorrow will log on


Please help me. Thanks.


I´m having xmlrpc.php and ddos attacks in my wordpress droplet, so i´m trying to stop them with several measures. Seeing my apache log file which is growing up to 120Mb before rotate to new one, I notice when my droplet have been attacked that i can´t access to my log file due to it size is growing for the threath requests and its size limit is so big. Where can i limit the size? Which size could be enough?


Be careful, if you’ve created a “new” VM (ex: from a snapshot) and never bothered to update the root password (assuming you created it so it had one changed) then your daily cron job’s (ex: logrotate) may not be turned on, which would cause apache’s normal package rotation for its logs to “not work” see http://serverfault.com/a/767550/27813

Hi, You can use my app to create Log syntax. It’s really easy, just drag and drop elements that you need. apacheloggenerator.com

Mike Karpinski

thanks , very useful

Kamal Nasser
DigitalOcean Employee
DigitalOcean Employee badge
September 3, 2013

Thanks @cherukumilli2, fixed.

The following instructions appear to be incorrect “We can find out what the “APACHE_LOG_DIR” is set to by examining a different file, the aptly-named “envars” file: sudo nano /etc/apache2/envars”

There is no file called “envars”. It should be changed to “envvars”. The correct sudo command is: sudo nano /etc/apache2/envvars

Try DigitalOcean for free

Click below to sign up and get $200 of credit to try our products over 60 days!

Sign up

Join the Tech Talk
Success! Thank you! Please check your email for further details.

Please complete your information!

Featured on Community

Get our biweekly newsletter

Sign up for Infrastructure as a Newsletter.

Hollie's Hub for Good

Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

Become a contributor

Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

Welcome to the developer cloud

DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

Learn more
DigitalOcean Cloud Control Panel