Tutorial

How To Install and Update WordPress with Version Control on CentOS 7

Published on November 10, 2014
How To Install and Update WordPress with Version Control on CentOS 7

Introduction

There are many ways to install the WordPress content management system. This tutorial introduces two methods for installing WordPress from a public repository: SVN or Git.

While you can install WordPress in a few different ways, e.g. using a one-click image, downloading a zip file, or using the built-in FTP service – using a repository has some unique benefits.

  • Quick upgrades and downgrades to different versions of WordPress
  • More secure protocols for transferring the files
  • Faster updates since only the changed files are transferred

What happens if you update WordPress to the latest version and your site goes down? With SVN or Git, you can easily roll back the file changes with one command. This is impossible with the FTP updater.

SVN or Git?

SVN stands for Apache Subversion. The official WordPress repository uses SVN:

http://core.svn.wordpress.org/

The benefit of using SVN is that you’re getting the files directly from WordPress.

Git is a somewhat more modern repository protocol. The GitHub WordPress repository is maintained by a third party, and currently gets its files from WordPress’s SVN repository:

https://github.com/WordPress/WordPress

The benefit of using Git is its more sophisticated version control. However, keep in mind that this is run by a third-party repository maintainer.

You are free to choose which system works best in your situation.

Prerequisites

Are you ready to get started? Good!

Let’s make sure you’ve got the necessary items:

  • A 1 GB Droplet running CentOS 7 (you can adapt this guide for Debian-based distros fairly easily)
  • root SSH access to your server; you could also use sudo

SVN Instructions

Follow these instructions for SVN. Skip to the Git instructions instead if you’d rather use Git.

SVN Step One — Install LAMP

Follow this tutorial to install Apache, MySQL, and PHP on your server:

How To Install Linux, Apache, MySQL, PHP (LAMP) stack On CentOS 7

You can stop after Step Three — Install PHP.

SVN Step Two — Install SVN

Install SVN with the following command:

yum install svn

You’ll need to answer yes to the installation and let the process complete.

Now let’s test it. Enter the following command:

svn

You should see the following message:

Type 'svn help' for usage.

SVN Step Three — Check out WordPress

When setting up a new WordPress installation, you should note the latest stable version. The best place for this is to visit the official WordPress website.

At the time of writing, this is WordPress 4.0, so that’s what we’ll use in the examples.

Decide where you want to install WordPress. In this example we’ll use the default Apache document root, /var/www/html. You may want to set up a virtual host instead.

Check out WordPress 4.0, or the latest version, right from WordPress’s repository:

svn co http://core.svn.wordpress.org/tags/4.0/ /var/www/html/

The general form of the command is as follows:

svn co http://core.svn.wordpress.org/tags/[VERSION]/ [INSTALL IN THIS DIRECTORY]/

You’ll see a bunch of file names flash by as your server talks to WordPress’s SVN server and grabs the files while noting the version numbers. The process should end with the message Checked out revision [some number].

Example:

Checked out revision 29726.

Congratulations! You’ve just installed WordPress using SVN. Now we need to set up the database and configure WordPress.

SVN Step Four — Configure WordPress

Follow the instructions in this WordPress installation tutorial except for the wget, tar, and rsync commands.

You should set up the database, change the wp-config.php details, and run the chown command:

chown -R apache:apache /var/www/html/*

At this point WordPress is ready to use! Visit your IP address or domain in your browser, and set your website and login details as prompted. Set it up to your liking, including any themes and plugins.

SVN Step Five — Secure the .svn Directory

SVN uses a special directory called .svn that contain important information. In the name of security, it is best to block access to this data so it can’t be viewed by the outside world using your web server.

If you want to see what it looks like now, visit http://example.com/.svn/ in your browser, using your own domain name. It shows all the administrative files for the repository - not good! Now we’ll fix this.

First, open your Apache configuration file for editing:

nano /etc/httpd/conf/httpd.conf

Locate the AllowOverride line in the <Directory “/var/www/html”> section. It should be the third AllowOverride line in the default configuration file. Update the setting from None to ALL. This will allow your .htaccess file to become active.

...
<Directory "/var/www/html">

...

    Options Indexes FollowSymLinks

...

    AllowOverride ALL

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>
...

Now create a new .htaccess file in the /var/www/html/.svn/.htaccess directory:

nano /var/www/html/.svn/.htaccess

Add the following contents to the file:

order deny, allow
deny from all

Restart Apache:

service httpd restart

Now you, or anyone trying to snoop on your server, will get an Internal Server Error if they visit http://example.com/.svn/.

SVN Step Six — Upgrade or Roll Back

New versions of WordPress will be released and you’ll want to quickly and easily update your installation to address security patches, fix bugs, and add new features. So let’s discuss how this is quickly and easily accomplished using SVN.

It’s always a good idea to make a backup.

Connect to your server with SSH, and move to your WordPress installation directory:

cd /var/www/html/

Execute this command to switch to a new version:

svn sw http://core.svn.wordpress.org/tags/[VERSION]/ .

[VERSION] is a placeholder for the actual number of the release.

The period (.) tells SVN where to check and install the files. Since we have changed to the directory containing the WordPress files, we simply used the period to tell SVN to look in the current directory. You could specify the path if you weren’t in the directory.

If the new version to be installed was 4.0.1, the command would be:

svn sw http://core.svn.wordpress.org/tags/4.0.1/ .

This is also the method for downgrading, too. So let’s say you want to return to version 3.9.2; you would do that with this command:

svn sw http://core.svn.wordpress.org/tags/3.9.2/ .

To see all the available options, check the WordPress SVN tags page.

That is how easy it is to upgrade and downgrade the core WordPress files using the SVN system. Your custom settings, like your wp-config.php file and your themes and plugins, should all stay in place. However, if you’ve modified any of the core files, you may run into problems. (That’s why you should have made a backup.)

Once you have the files, you need to let WordPress make the changes it needs in the database.

Visit http://example.com/wp-admin/

Click the Update WordPress Database button.

That’s it! You should now be on your desired version of WordPress. If your site isn’t working after the change, simply check out the version you had before.

Git Instructions

Follow these instructions for Git. Scroll back up to the SVN instructions if you’d rather use SVN.

Git Step One — Install LAMP

Follow this tutorial to install Apache, MySQL, and PHP on your server:

How To Install Linux, Apache, MySQL, PHP (LAMP) stack On CentOS 7

You can stop after Step Three — Install PHP.

Git Step Two — Install Git

Install Git with the following command:

yum install git

You’ll need to answer yes to accept the download. Now let’s test it. Enter the following command:

git

You should see the following message:

usage: git ...

Git Step Three — Clone WordPress

First, figure out which version of WordPress you want to install. The best place for this is to visit the [official WordPress website] (http://www.wordpress.org).

At the time of writing, this is WordPress 4.0, so that’s what we’ll use in the examples.

Decide where you want to install WordPress. In this example we’ll use the default Apache document root, /var/www/html. If you want to set up a virtual host, you can do that instead.

Clone the latest version of WordPress from the GitHub repository:

git clone git://github.com/WordPress/WordPress /var/www/html/

The general form of the command is as follows:

git clone git://github.com/WordPress/WordPress [INSTALL IN THIS DIRECTORY]/

You’ll see some messages such as Cloning in… along with, but not limited to, Receiving objects: and Receiving deltas: with some information. You now have a complete working development copy of WordPress, including past production runs.

However, we want the latest production (stable) version. First move to the WordPress directory on your server:

cd /var/www/html/

Check out WordPress 4.0, or the latest stable version, with the following command:

git checkout 4.0

The general form of the command is as follows:

git checkout [VERSION]

Git will display some information along with something like HEAD is now at 8422210... Tag 4.0, which indicates the file versions were successfully changed; in this case to 4.0.

Congratulations! You’ve just installed WordPress using Git.

Now we need to set up the database and configure WordPress.

Git Step Four — Configure WordPress

Follow the instructions in this WordPress installation tutorial, but without the wget, tar, and rsync commands.

You do need to set up the database, change the wp-config.php details, and run the chown command:

chown -R apache:apache /var/www/html/*

At this point WordPress is ready to use! Visit your IP address or domain in your browser, and set your website and login details as prompted. You can add themes, plugins, and content as you like.

Git Step Five — Secure the .git Directory

Git uses a special directory called .git that contain important information. You should block web access to this directory for security’s sake.

If you want to see what it looks like now, visit http://example.com/.git/ in your browser, using your own domain name. It should list the files in the directory, which is a security issue.

First, open your Apache configuration file for editing:

nano /etc/httpd/conf/httpd.conf

Locate the AllowOverride line in the <Directory “/var/www/html”> section. It should be the third AllowOverride line in the default configuration file. Update the setting from None to ALL. This will allow your .htaccess file to become active.

...
<Directory "/var/www/html">

...

    Options Indexes FollowSymLinks

...

    AllowOverride ALL

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>
...

Now create a new .htaccess file in the /var/www/html/.git/.htaccess directory:

nano /var/www/html/.git/.htaccess

Add the following contents to the file:

order deny, allow
deny from all

Restart Apache:

service httpd restart

Now you, or anyone trying to snoop on your server, will get an Internal Server Error if they visit http://example.com/.git/.

Git Step Six — Upgrade or Roll Back

Now it’s time to upgrade WordPress. You’ll want to keep up with security patches, bug fixes, and new features. So let’s discuss how to upgrade with Git.

It’s always a good idea to make a backup.

Connect to your server with SSH, and move to your WordPress installation directory:

cd /var/www/html/

Fetch the latest files from the third-party WordPress repository:

git fetch -p git://github.com/WordPress/WordPress

The -p switch tells Git to remove any old versions that are no longer in the repository. This helps keep your files in sync with the remote server.

Execute this command to check out a new version:

git checkout [VERSION]

[VERSION] is a placeholder for the actual number of the release. If the new version to be installed was 4.0.1, the command would be:

git checkout 4.0.1

This is also the method for downgrading, too. If you want to return to version 3.9.2; you would do that with this command:

git checkout 3.9.2

To see all the available options, check the branch dropdown and the Tags tab on the repository page.

That’s it! With Git, your custom settings, like your wp-config.php file and your themes and plugins, should stay the same. However, if you’ve modified any of the core files, you may run into problems; hence the need for a backup.

Once you have the files, you need to let WordPress make the changes it needs in the database.

Visit http://example.com/wp-admin/.

Click the Update WordPress Database button.

That’s it! You should now be on your desired version of WordPress. If your site isn’t working after the change, simply check out the version you had before.

Conclusion

If you made it to the end of this tutorial you should have a basic understanding of setting up WordPress using the SVN and/or Git system(s). It is important to note that this method will back up the core WordPress system, but your custom themes and plugins will require a different approach.

Now that you have learned how to manage WordPress with version control, you’ll probably never want to go back. This is so much faster, easier, and safer. You don’t need to store any FTP information in your WordPress installation. Also, you can easily and quickly revert back to previous versions if the need arises, something that the FTP method makes more difficult.

This guide is not a replacement for a good backup system, so make sure you have good backups, too.

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors
Default avatar
Jeremy

author



Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
8 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Hello and thanks for the great tutorial. How would you reconcile this with this article?

I use the process outlined in the link for updating my code (the wordpress core files are gitignored).

Regarding how to update my WordPress core, should I:

  1. Remove the core files from gitignore and keep using the process in the link? or
  2. Create a separate working tree (not sure my terminology is accurate) in my wordpress directory for updating wordpress core and follow the procedure that you describe here?

Thanks.

Sorry- I’m sure I’m missing something obvious here, but how would you then handle your theme files. Say you’re developing a custom theme for a client. You’ll have the theme files in your own repo.
I was hoping for a recap on how you install WP as a git submodule so that you can keep your theme files in version control as well. Otherwise wouldn’t they be overwritten if you adjust WP via git?

How do I do this with Ubuntu? Running Lamp Stack…

Great guide!much appreciated. Would like to point out that as a centos7 guide, should be pointing people to using systemctl <operation> <service>, instead of “service”

IE: systemctl restart httpd

Not a big deal as service still technically works, but you never know when they will revoke the service command :)

This comment has been deleted

    Any recommendations for https without wordpress plugins?

    Did you originally install WP using SVN? SVN won’t upgrade WP if it wasn’t originally installed using SVN. You can convert WP to SVN if it wasn’t originally installed that way.

    This involves installing WP using SVN into a separate location and transferring all your plugins, themes, and wp-config.php to the new location. Then you switch the old WP install with the new SVN install.

    So how did you first install WP?

    if i run this (svn sw http://core.svn.wordpress.org/tags/4.1/ .) I get At revision 30962. but WordPress does not upgrade to 4.1 in the admin (An updated version of WordPress is available.)

    Try DigitalOcean for free

    Click below to sign up and get $200 of credit to try our products over 60 days!

    Sign up

    Join the Tech Talk
    Success! Thank you! Please check your email for further details.

    Please complete your information!

    Get our biweekly newsletter

    Sign up for Infrastructure as a Newsletter.

    Hollie's Hub for Good

    Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

    Become a contributor

    Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

    Welcome to the developer cloud

    DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

    Learn more
    DigitalOcean Cloud Control Panel