Tutorial

How To Install Laravel 4 on a CentOS 6 VPS

Published on July 15, 2013
Default avatar

By James Tyner

How To Install Laravel 4 on a CentOS 6 VPS

Status: Deprecated

This article covers a version of CentOS that is no longer supported. If you are currently operating a server running CentOS 6, we highly recommend upgrading or migrating to a supported version of CentOS.

Reason: CentOS 6 reached end of life (EOL) on November 30th, 2020 and no longer receives security patches or updates. For this reason, this guide is no longer maintained.

See Instead:
This guide might still be useful as a reference, but may not work on other CentOS releases. If available, we strongly recommend using a guide written for the version of CentOS you are using.

Introduction

Laravel 4 is a MVC framework written in the PHP programming language. It is a fairly young framework, but has quickly risen to become one of the most popular PHP frameworks available. It also has a large vibrant community behind it. To be able to use Laravel 4 you must have a VPS running at least PHP version 5.3.7, and also have installed the MCrypt PHP extension.

Laravel 4 makes extensive use of Composer, which is a dependency manager for PHP. By utilizing Composer, Laravel 4 gives you complete freedom of how to structure your applications. You can browse the many available composer packages at packagist.org.

Installing Repositories

Let’s install the Remi & Epel repositories.

If you are running a 64bit version of a CentOS VPS, enter the following commands in the terminal:

rpm -Uvh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm

If you are running a 32bit version of a CentOS VPS, enter these commands instead:

rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm

Installing Apache

In this step, we will install the Apache server. Enter the following in the terminal:

sudo yum --enablerepo=remi install httpd

Once installed we can start the VPS by executing:

sudo service httpd start

To verify if Apache is installed, direct your browser to your cloud server’s IP address (eg. http://12.34.56.789). You should see the Apache test page.

If you are uncertain of your cloud server's IP Address, you can issue the following command:

ifconfig eth0 | grep inet | awk '{ print $2 }'

Installing PHP

In this step, we will install PHP and the MCrypt extension. Enter the following in the terminal:

sudo yum --enablerepo=remi install php php-mysql

Once installed we can check the version:

php –v

PHP has a wide variety of extensions you can install. To see what is available, enter the following:

 yum search php-

As mentioned in the introduction, we need to have the MCrypt extension installed. Enter the following in the terminal:

sudo yum --enablerepo=remi install php-mcrypt

Installing MySQL

More than likely, you will need to have a database for your site. In this step we will install the MySQL database.

Enter the following:

sudo yum --enablerepo=remi install mysql-server

After it installs, we can start the service:

sudo service mysqld start

We should set a password for the root user, otherwise we would leave a big security gap in our setup. Enter the following in the terminal:

sudo /usr/bin/mysql_secure_installation

The prompt will ask you for your current root password. Since you have just installed MySQL, you most likely won’t have one, so leave it blank by pressing Enter.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

The prompt will ask you if you want to set a root password. Go ahead and choose Y and follow the instructions. CentOS automates the process of setting up MySQL, asking you a series of yes or no questions. It’s easiest just to say Yes to all the options. At the end, MySQL will reload and implement the new changes.

By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y                                            
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] y
... Success!

By default, MySQL comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MySQL
installation should now be secure.

Thanks for using MySQL!

Starting Services Automatically

Now that we have Apache, PHP, and MySQL installed, we should set them to run automatically when the VPS starts. Enter the following:

sudo chkconfig httpd on
sudo chkconfig mysqld on

Now that we have a LAMP Server setup we can proceed with the Laravel Installation.

Installing Composer

The first step is to install Composer. Run the following command from the terminal:

curl  -k -sS https://getcomposer.org/installer | php

This will download and install composer. We will want to move composer to be available within our PATH. You can view these locations by entering the following in the terminal:

echo $PATH

We will put composer in our /usr/local/bin/ directory. Enter the following in the terminal:

sudo mv composer.phar /usr/local/bin/composer

Here we moved the composer.phar file and renamed it to simply “composer”.

Installing Laravel

Now that we have Composer installed, we will proceed with installing Laravel. Issue the following command from the terminal:

wget https://github.com/laravel/laravel/archive/develop.zip

This will download a .zip file of the Laravel framework. The next step is to unzip this file. Ensure that the unzip software is installed by issuing the following command:

which unzip

If it is installed you will see it’s path. If it is not installed, you will get an error. You can install it via the following command:

sudo yum install unzip

Now that we've confirmed to have the unzip software, we can now unzip the archive. Enter the following:

unzip develop

When we unzipped the develop.zip, it creates a directory named “laravel-develop”. You can verify this by running the following in the terminal:

ls

Move this directory to our www directory:

mv laravel-develop /var/www/yoursite

Here we have moved the directory and renamed it to: “yoursite”. Make sure you replace “yoursite” with the name of your site.

Now that we are finished with the develop.zip, we can now delete it:

rm  -f develop

After this, we will need to install the Composer dependencies for the Laravel project. First, change into the sites directory. Make sure, once again, to replace “yoursite” with the name of the site you used in the above steps:

cd /var/www/yoursite

Then issue the composer install command to install the dependencies:

composer install

(This could take a little while. Please be patient during the installation.)

Lastly, we need to change the permissions in the “app/storage” directory. Laravel needs to be able to write into this directory. Once again, note the “yoursite” part:

chmod –R  775 /var/www/yoursite/app/storage

Setting up a Virtual Host in Apache

The final step we need to do is to setup a Virtual Host within Apache. To do this, edit the “httpd.conf” file. You can open the file for editing with the following command:

sudo nano /etc/httpd/conf/httpd.conf

Enter the following and save the file:

<VirtualHost *:80>
        ServerName yoursite.com
        DocumentRoot /var/www/yoursite/public

       <Directory /var/www/yoursite/public>
          <IfModule mod_rewrite.c>
          Options -MultiViews
          RewriteEngine On
          RewriteCond %{REQUEST_FILENAME} !-f
         RewriteRule ^ index.php [L]
       </IfModule>
</Directory>
</VirtualHost>

Here we setup our Virtual Host and removed index.php from our requests allowing for “cleaner” URLs. Finally, restart Apache. I am sure you don’t need reminding by now, but make sure you replace “yoursite” with the site you entered in the above steps:

sudo service httpd restart

Conclusion

If it all went well, you should now be able to visit your site and see the Laravel logo!

Thanks for learning with the DigitalOcean Community. Check out our offerings for compute, storage, networking, and managed databases.

Learn more about us


About the authors
Default avatar
James Tyner

author

Still looking for an answer?

Ask a questionSearch for more help

Was this helpful?
 
10 Comments


This textbox defaults to using Markdown to format your answer.

You can type !ref in this text area to quickly search our full set of tutorials, documentation & marketplace offerings and insert the link!

Even easier command to install Laravel 4 without the wget

composer create-project laravel/laravel will fetch Laravel and all dependencies.

this link that you mentioned has some missing folders like : vendor i think its better to do it via the regular and common way that the Laravel official site suggests : via Laravel installer or via Composer Create-Project

This comment has been deleted

    Can anyone advise if the above process will work fine for Laravel 5?

    Thanks for this tutorial. I have two problems:

    1. To execute the “chmod –R 775 /var/www/yoursite/app/storage” command, there should be a folder named storage before the execution I assume but there was none so I created that folder myself. Is it related with my second problem?

    2. When I try to reach my site, I get “403 Forbidden” error like @harmonj3 and I have tried all possible addresses as you can see in the error log below. The result of “sudo tail -30 /var/log/httpd/error_log” is as follows (ı named my site as testsite instead of “yoursite” in the tutorial):

    [Tue Nov 11 16:29:35 2014] [error] [client ::1] (13)Permission denied: access to /testsite/public denied [Tue Nov 11 16:29:54 2014] [error] [client ::1] (13)Permission denied: access to /testsite/public denied [Tue Nov 11 16:29:56 2014] [error] [client ::1] (13)Permission denied: access to /testsite denied [Tue Nov 11 16:29:59 2014] [error] [client ::1] (13)Permission denied: access to / denied [Tue Nov 11 16:31:08 2014] [error] [client ::1] (13)Permission denied: access to /index.php denied [Tue Nov 11 16:31:14 2014] [error] [client ::1] (13)Permission denied: access to /testsite/index.php denied [Tue Nov 11 16:31:19 2014] [error] [client ::1] (13)Permission denied: access to /testsite/public/index.php denied [Tue Nov 11 16:36:30 2014] [error] [client ::1] (13)Permission denied: access to /testsite/public/index denied

    Thanks for your help.

    I followed your tutorial step by step but i have a problem. Please visit the link http://efendi.co you will be understand. :/

    Very well! i’m in love with Laravel, Laravel support is the reason why I pay for this VPS service. Thanks!

    can anyone do a video install and a demo?

    Kamal Nasser
    DigitalOcean Employee
    DigitalOcean Employee badge
    February 2, 2014

    @harmonj3: Check apache’s error logs: <pre>sudo tail -30 /var/log/httpd/error_log</pre>

    I get a ‘Forbidden’ error message in my browser after completing the steps posted here…what could be wrong?

    Try DigitalOcean for free

    Click below to sign up and get $200 of credit to try our products over 60 days!

    Sign up

    Join the Tech Talk
    Success! Thank you! Please check your email for further details.

    Please complete your information!

    Get our biweekly newsletter

    Sign up for Infrastructure as a Newsletter.

    Hollie's Hub for Good

    Working on improving health and education, reducing inequality, and spurring economic growth? We'd like to help.

    Become a contributor

    Get paid to write technical tutorials and select a tech-focused charity to receive a matching donation.

    Welcome to the developer cloud

    DigitalOcean makes it simple to launch in the cloud and scale up as you grow — whether you're running one virtual machine or ten thousand.

    Learn more
    DigitalOcean Cloud Control Panel